This is why PUSHER is NOT always BETTER... feat. Diatone Taycan molded & 3D-printed ducts @muteFPV
This is why PUSHER is NOT always BETTER... feat. Diatone Taycan molded & 3D-printed ducts  @muteFPV
Uploaded April 2022 | Updated September 2026, 2 weeks ago
πŸ‘ If you LIKE what you see and want to SUPPORT the channel, you can join my PATREON mutefpv.com/patreon or tip my 'piggy bank' via PAYPAL mutefpv.com/paypal
-------------
πŸ”Ά You can also use the following affiliate links and BOOKMARK the links at the end of this description - I get a small kickback if you decide to buy something and it costs NOTHING extra to you.
-------------
πŸ”” SUBSCRIBE for more unique content! mutefpv.com/subscribe
_________

The idea of a pusher setup is simple: you remove obstructions from the path of the airflow in order to increase performance. But this is not always true, especially when you are dealing with ducts.

πŸ‘‰ RCbenchmark thrust stands: mutefpv.com/2k7lp (RCbenchmark)

πŸ‘‰ Diatone MAMBA Toka 1408 2900KV motors:
mutefpv.com/raapp (BG)
mutefpv.com/i1vc4 (GET)
mutefpv.com/dsie4 (EB)
mutefpv.com/umt4l (AE)
mutefpv.com/19rvp (AE)

πŸ‘‰ Other MAMBA Toka motors:
mutefpv.com/eaopd (BG)
mutefpv.com/3z89z (GET)
mutefpv.com/5w3y8 (EB)
mutefpv.com/9n1i9 (AE)
mutefpv.com/7dtcy (AE)
mutefpv.com/d30rx (paid link to Amazon)

πŸ‘‰ Illuminated molded duct kit for the Diatone MXC Taycan:
mutefpv.com/cnvps (BG)
mutefpv.com/83yw7 (EB)
mutefpv.com/0gn1p (AE)
mutefpv.com/9wgm8 (AE)

πŸ‘‰ Upgraded molded Taycan ducts:
mutefpv.com/dgt4p (BG)
mutefpv.com/jr5j9 (BG)
mutefpv.com/ar4ed (GET)
mutefpv.com/99598 (GET)
mutefpv.com/2hpy2 (EB)
mutefpv.com/qjvyx (AE)
mutefpv.com/buikr (AE)
mutefpv.com/v92lv (AE)
mutefpv.com/9c237 (paid link to Amazon)

πŸ‘‰ Diatone Taycan Analog BNF:
mutefpv.com/gbnks (BG)
mutefpv.com/84dwm (GET)
mutefpv.com/11kya (GET)
mutefpv.com/fz9ur (GET)
mutefpv.com/9w8h3 (AE)
mutefpv.com/bezk6 (AE)
mutefpv.com/h2hlw (paid link to Amazon)

πŸ‘‰ Diatone Taycan HD BNF:
mutefpv.com/1ohny (BG)
mutefpv.com/gbtup (GET)
mutefpv.com/6az1g (GET)
mutefpv.com/3asmm (AE)
mutefpv.com/5nfd8 (AE)

πŸ‘‰ Gemfan D76 5-bladed props:
mutefpv.com/q3xwb (BG)
mutefpv.com/mnsa9 (GET)
mutefpv.com/74pxz (EB)
mutefpv.com/tl8rj (AE)
mutefpv.com/nysgz (AE)
mutefpv.com/ix7k6 (paid link to Amazon)

πŸ‘‰ Other popular cinewhoop props:
mutefpv.com/6oppb (BG)
mutefpv.com/xw5py (BG)
mutefpv.com/4c595 (GET)
mutefpv.com/5vhbo (GET)
mutefpv.com/f63cx (GET)
mutefpv.com/xz6kc (EB)
mutefpv.com/8lmqg (EB)
mutefpv.com/9u741 (EB)
mutefpv.com/posi2 (AE)
mutefpv.com/sh8ox (AE)
mutefpv.com/rjh8k (AE)

Watch next:
πŸ‘‰ Duct design part 1: mutefpv.com/rox3s (YT)
πŸ‘‰ Duct design part 2: mutefpv.com/6ngt2 (YT)
πŸ‘‰ My original Diatone Taycan BNF cinewhoop review: mutefpv.com/6jvn8 (YT)

πŸ‘‰ First introduction to my motor / prop / BNF tests series (currently upgraded to the 1585 thrust stand): mutefpv.com/nymve (YT)
πŸ‘‰ Motor & Propeller tests playlist: mutefpv.com/wbrhx (YT)
πŸ‘‰ BNF benchmarking playlist: mutefpv.com/7f1z2 (YT)

πŸ‘‰ I found the 3D model of the motor on Grabcad: mutefpv.com/tgy37 (GrabCad)

Legend:
AE = AliExpress
BG = Banggood
EB = Ebay
GET = GetFPV


INDEX
00:00 Intro
00:15 General information
01:27 Duct design & considerations
02:55 Molded & 3D printed ducts
03:42 Test setup
05:24 SUPPORT
05:50 Test footage
06:54 Test results


πŸ‘ PLEASE SUPPORT the MuteFPV channel:
-------
πŸ‘ Join my PATREON: mutefpv.com/patreon
πŸ‘ Tip my 'piggy bank' via PAYPAL: mutefpv.com/paypal

πŸ‘ Save and use these BOOKMARKS before purchasing new goodies (please bookmark the SHORTLINKS in your browser):
BANGGOOD: mutefpv.com/banggood
AMAZON (ad): mutefpv.com/amazon
GETFPV: mutefpv.com/getfpv
EBAY: mutefpv.com/ebay
ALIEXPRESS: mutefpv.com/aliexpress
REELSTEADY: mutefpv.com/reelsteady

πŸ‘ THANK YOU in advance for your support!

(As an Amazon Associate I earn from qualifying purchases.)


-------
Music: Toby Tranter - Perfect Time
Find the track here: mutefpv.com/epidemic


#muteFPV
#Pusher
#DuctDesign
This is why PUSHER is NOT always BETTER... feat. Diatone Taycan molded & 3D-printed ductsJumper T16 switches not working : How to fix and replace the ribbon cablesBeta85 Pro 2: the Shutterbug85 of BetaFPV - BNF TESTINGRCinPower SmooX 1404 3850KV FPV motors on 3S (feat. HQprop, Gemfan & iFlight Nazgul)HGLRC Sector5 V3 : full fledged FPV freestyle quad ready to ripBetaFPV 1S 300mAh 30C/60C LiHV Battery Testing - RCTESTBEN.CHFPV goggle module comparison: TBS Fusion vs IRC Rapidfire vs Foxeer Wildfire vs FuriousFPV TrueD-XFoldable illuminated INFINITY GATE for Tiny Whoops and micros: make your indoor FPV track stand out!Ethix propellers for FPV freestyle : PeanutButter Jelly P3 vs Watermelon S3 vs Lemon-Lime S4 vs S5ZOP Power 2S 850mAh 70C LiPo Battery Testing - RCTESTBEN.CHHyperion G7 HV 1S 600mAh 30C/60C LiHV Si-Graphene Battery Testing - RCTESTBEN.CHBest props for the Diatone Taycan25 : 2.5 3-blade Gemfan vs HQprop vs Racerstar
muteFPV |

This is why PUSHER is NOT always BETTER... feat. Diatone Taycan molded & 3D-printed ducts

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER