Uploaded August 2025 | Updated September 2026, 2 weeks ago
The Sovol SV08 Max is a massive CoreXY 3D printer with a build volume big enough for furniture-sized ideas… but it also comes with a personality you can hear across the room. In this review, I’ll test its speed, print quality, material compatibility, and of course – its noise levels.
Product link (affiliate): shrsl.com/4xjzg
From fast Benchies to 15-hour statues, PET-CF experiments, and even a marble run, I pushed this printer to see where it shines and where it struggles.
Mentioned in the video:
gerGO PRINT 3D: youtube.com/@gerGoPrint3D
Marble run: printables.com/model/725269-marble-run
Albert Einstein: printables.com/model/59080-albert-einstein-support-free
Sovol testing 6mm belts: youtu.be/taJReoYzFHc?si=-sMpoOS1KG_pPVDo
Carvera Air: youtu.be/WR7ROCYbwcc?si=NLS3Uihk02XdT20y
Owl from 3D scanning video: youtu.be/1sZjSsa4W7c
📊 Chapters
0:00 Introduction
0:35 Specifications
1:34 What will I test?
2:30 Unboxing
3:29 Assembling
6:00 Turning ON, Calibration
7:13 Fast Benchy
8:19 Slow Benchy
9:16 Owl (Silk PLA, 13.5 hours)
10:52 Bed level test (PLA, 2 hours)
11:45 Einstein (Matte PLA, 15 hours)
13:32 Max flow test
14:47 Filament runout sensor
16:52 Marble run (rainbow PLA)
18:05 PETG (black)
18:41 Screen replacement
19:12 White PETG (4.5 hours)
20:01 Noise
20:17 PET-CF (short printing)
21:20 Thermal camera
22:08 PET-CF (long printing, clog)
24:10 Conclusions
#3Dprinting #Sovol #SV08Max
The Sovol SV08 Max is a massive CoreXY 3D printer with a build volume big enough for furniture-sized ideas… but it also comes with a personality you can hear across the room. In this review, I’ll test its speed, print quality, material compatibility, and of course – its noise levels.
Product link (affiliate): shrsl.com/4xjzg
From fast Benchies to 15-hour statues, PET-CF experiments, and even a marble run, I pushed this printer to see where it shines and where it struggles.
Mentioned in the video:
gerGO PRINT 3D: youtube.com/@gerGoPrint3D
Marble run: printables.com/model/725269-marble-run
Albert Einstein: printables.com/model/59080-albert-einstein-support-free
Sovol testing 6mm belts: youtu.be/taJReoYzFHc?si=-sMpoOS1KG_pPVDo
Carvera Air: youtu.be/WR7ROCYbwcc?si=NLS3Uihk02XdT20y
Owl from 3D scanning video: youtu.be/1sZjSsa4W7c
📊 Chapters
0:00 Introduction
0:35 Specifications
1:34 What will I test?
2:30 Unboxing
3:29 Assembling
6:00 Turning ON, Calibration
7:13 Fast Benchy
8:19 Slow Benchy
9:16 Owl (Silk PLA, 13.5 hours)
10:52 Bed level test (PLA, 2 hours)
11:45 Einstein (Matte PLA, 15 hours)
13:32 Max flow test
14:47 Filament runout sensor
16:52 Marble run (rainbow PLA)
18:05 PETG (black)
18:41 Screen replacement
19:12 White PETG (4.5 hours)
20:01 Noise
20:17 PET-CF (short printing)
21:20 Thermal camera
22:08 PET-CF (long printing, clog)
24:10 Conclusions
#3Dprinting #Sovol #SV08Max
