Woodpeckers | The MT Center Gauge eliminates the guesswork from precisely centering mortise and tenon joints! @WoodpeckersLLC | Uploaded July 2024 | Updated October 2024, 21 minutes ago.
When you drop the MT Center Gauge on the edge of your stock and squeeze the two sides together, the marking bar is perfectly centered on your stock. It can’t help it. It’s the simple geometry of a parallelogram. With a hole milled precisely in the center of each bar, all you have to do to mark the center of any piece of stock is place a pencil in the hole and slide. And, to lay out a mortise or tenon centered on your stock, just mark both sides of the bar. It’s that simple. Each of the stainless-steel interchangeable marking bars has a specific width. You can get the MT Center Gauge with 1/4”, 3/8”, 7/16” and 1/2” stainless steel marking bars or with 4mm, 5mm, 6mm, 8mm and 10mm, or the complete set with all 9.

You can find the MT Center Gauge on our website at woodpeck.com or copy and paste the link below in your web browser!

woodpeck.com/mt-center-gauge.html?utm_source=YouTube&utm_medium=Shorts&utm_campaign=MTCG-JAY-07-2024

Tools Used:
1️⃣ MT Center Gauge - Deluxe
SKU: MTCGSS-DEL-24

2️⃣ MT Center Gauge - Inch
SKU: MTCGSS-IN-24

3️⃣ MT Center Gauge - Metric
SKU: MTCGSS-MM-24

4️⃣ Woodpeckers .9mm Mechanical Pencil
SKU: WOODPECKERS-9MM-MECHANICAL-PENCIL

#woodworking #woodpeckerstools #layout #woodworkingcommunity #woodworkingskills #joinery #woodworkingjoints #craftsmanship #woodshop #woodshoplife #makersgonnamake #newtools #satisfyingvideos #madeinusa #madeinamerica