State of Electronics | The Factory Tours of Shenzhen - HYX Gears & ITEAD Studios @StateofElectronics | Uploaded 6 years ago | Updated June 24 2024
This week, we visit HYX Gears and ITEAD Studios.
In the last two factory tours of our visit to Shenzhen, we learn about the many varied and wide ranging sizes of gears manufactured by HYX. Although our tour was quick, we walked through several facilities of theirs, which featured handmade metal gears, plastic injection moulded gears and metal gears created on CNC hobbing machines. For Brian Gilbert, it was an opportunity to visit his manufacturer of gears, for his product "the Zesy Nimble" 3D Printer extruder - https://zesty.tech
ITEAD Studios makes the Sonoff range of home automation devices which many hackers and makers like Jon Oxer take advantage of (thanks to the onboard ESP8266 chipset) to automate their houses. Jon has made an excellent video about the same factory tour, which you can see here: https://www.superhouse.tv/27-visit-to-the-sonoff-factory/ as well as featured Sonoff products in his Youtube series https://www.youtube.com/watch?v=_389pQPLyr8&t=1789s
ITEAD have found the balance between quality and volume production by designing their products for a largely manual, simple manufacturing process. We walk through the lines and witness the rows of human hands on the production line.
As a group we discuss the tradeoff between quality and rapid low cost manufacturing. Both have their place and our many factory tours give us plenty to think about in terms of our needs. In some cases, quality is everything (such as defense, medical, health and safety etc) while in other cases, cost is everything. Determining your “buy in” to this dilemma is a very important step in understanding your requirements. You can buy any amount of quality and this is up to you, the commissioning designer/entrepreneur!
For more about HYG Gears visit http://www.hyx-gears.com
For more about ITEAD Studios visit https://www.itead.cc
For more about HardworX visit https://www.hardworx.io
For more about this series visit https://www.stateofelectronics.com
For more about Jon Oxer visit https://www.superhouse.tv
For more about Tom Partridge visit https://www.tectonica.net
Don't forget to like, share and contribute to this channel. Your support is very much needed to keep it going.
NOTE on "comment" policy: Please understand that this video neither condones nor comments on reputation, labour practices, and other standards, in particular relating to safety. It is intended for educational purposes only, allowing you the viewer to participate in our tour. The company has kindly opened its doors to us and allowed us to come and see what they can do in a free and open manner. State of Electronics respects this and asks that you do so as well. This video has no sponsorship or other influences from the company highlighted. The comments made by participants are the result of this personal tour and their personal opinions on what they witnessed and understood. However, State of Electronics does understand that some of it's viewers will have concerns about standards. Please do not post comments relating to your opinions on safety or other labour practices to this video as they vary greatly from country to country and subsequently will be deleted. Express your views in your own video, using your own footage, and put your name to it to make it count. Thank you for your understanding.
This week, we visit HYX Gears and ITEAD Studios.
In the last two factory tours of our visit to Shenzhen, we learn about the many varied and wide ranging sizes of gears manufactured by HYX. Although our tour was quick, we walked through several facilities of theirs, which featured handmade metal gears, plastic injection moulded gears and metal gears created on CNC hobbing machines. For Brian Gilbert, it was an opportunity to visit his manufacturer of gears, for his product "the Zesy Nimble" 3D Printer extruder - https://zesty.tech
ITEAD Studios makes the Sonoff range of home automation devices which many hackers and makers like Jon Oxer take advantage of (thanks to the onboard ESP8266 chipset) to automate their houses. Jon has made an excellent video about the same factory tour, which you can see here: https://www.superhouse.tv/27-visit-to-the-sonoff-factory/ as well as featured Sonoff products in his Youtube series https://www.youtube.com/watch?v=_389pQPLyr8&t=1789s
ITEAD have found the balance between quality and volume production by designing their products for a largely manual, simple manufacturing process. We walk through the lines and witness the rows of human hands on the production line.
As a group we discuss the tradeoff between quality and rapid low cost manufacturing. Both have their place and our many factory tours give us plenty to think about in terms of our needs. In some cases, quality is everything (such as defense, medical, health and safety etc) while in other cases, cost is everything. Determining your “buy in” to this dilemma is a very important step in understanding your requirements. You can buy any amount of quality and this is up to you, the commissioning designer/entrepreneur!
For more about HYG Gears visit http://www.hyx-gears.com
For more about ITEAD Studios visit https://www.itead.cc
For more about HardworX visit https://www.hardworx.io
For more about this series visit https://www.stateofelectronics.com
For more about Jon Oxer visit https://www.superhouse.tv
For more about Tom Partridge visit https://www.tectonica.net
Don't forget to like, share and contribute to this channel. Your support is very much needed to keep it going.
NOTE on "comment" policy: Please understand that this video neither condones nor comments on reputation, labour practices, and other standards, in particular relating to safety. It is intended for educational purposes only, allowing you the viewer to participate in our tour. The company has kindly opened its doors to us and allowed us to come and see what they can do in a free and open manner. State of Electronics respects this and asks that you do so as well. This video has no sponsorship or other influences from the company highlighted. The comments made by participants are the result of this personal tour and their personal opinions on what they witnessed and understood. However, State of Electronics does understand that some of it's viewers will have concerns about standards. Please do not post comments relating to your opinions on safety or other labour practices to this video as they vary greatly from country to country and subsequently will be deleted. Express your views in your own video, using your own footage, and put your name to it to make it count. Thank you for your understanding.
