Uploaded March 2020 | Updated September 2026, 2 weeks ago

---

Hi everyone! I decided to try my hand at a little frame design as I had a simple idea for a 3" quad based around the HGLRC Zeus35 AIO board and Caddx Vista. I used Fusion 360 to design the frame and TPU camera mount and I had the carbon cut at Flynoceros. They did a very nice job although getting the first frame parts was a little pricey at $60. I will also try Armattan as they are cheaper but it also seems to take quite a bit longer.

Flynoceros
theflynoshop.com

HGLRC Zeus35
pyrodrone.com/collections/flight-controllers/products/hglrc-zeus35-aio-3-6s-f4-flight-control-35a-bls-4in1-esc-20x20-1

M2 stand-offs
racedayquads.com/collections/m2-hardware/products/m2-knurled-standoff-choose-your-size-16-23-25mm-1-pc

M2 stepped washers
racedayquads.com/collections/m2-hardware/products/m2-countersunk-washer-1pc-choose-your-color

M2 nuts and bolts
racedayquads.com/collections/m2-hardware/products/m2-black-steel-280-piece-nut-bolt-kit