Uploaded February 2025 | Updated November 2026, 1 day ago
Watch how I built a BLE-powered image transfer system using T-Glass (ESP32-S3) and a Flutter macOS app! 🚀📡 In this project, the Flutter app captures and resizes images, then transmits them wirelessly to the T-Glass display using BLE.
Project Highlights:
- BLE communication for seamless image transfer
- LVGL-based UI rendering on T-Glass
- Flutter app for macOS (with Windows support via `flutter_blue_plus_windows`)
Project Github:
github.com/0015/T-Glass-Applications
T-Glass v2:
lilygo.cc/products/t-glass
Watch how I built a BLE-powered image transfer system using T-Glass (ESP32-S3) and a Flutter macOS app! 🚀📡 In this project, the Flutter app captures and resizes images, then transmits them wirelessly to the T-Glass display using BLE.
Project Highlights:
- BLE communication for seamless image transfer
- LVGL-based UI rendering on T-Glass
- Flutter app for macOS (with Windows support via `flutter_blue_plus_windows`)
Project Github:
github.com/0015/T-Glass-Applications
T-Glass v2:
lilygo.cc/products/t-glass





![I Built a REAL 3D Pokédex!
I built a real 3D Pokédex for my son using an ESP32-P4 and a 4-inch round touch display!
Even without a GPU, the ESP32-P4 handles simple low-poly 3D rendering with ease—bringing interactive 3D Pokémon, mini-games, and evolutions to life in real-time.
[ESP32-P4 4-Inch Round Display]
https://www.waveshare.com/esp32-p4-wifi6-touch-lcd-3.4c.htm?&aff_id=116255
https://amzn.to/4pSgNoT
#ESP32P4 #Pokemon #Pokedex #3DRendering #DIY #Maker #EmbeddedSystems I Built a REAL 3D Pokédex!](https://i.ytimg.com/vi/wpZwAqcCTaE/mqdefault.jpg)
![8 Sorting Algorithms Side-by-Side on ESP32-S3 & RLCD
Visualizing and benchmarking 8 classic sorting algorithms on a 4.2 Reflective LCD (400x300, 1-bit monochrome, no backlight) powered by an ESP32-S3 microcontroller.
All 8 algorithms are executed on the exact same dataset of 96 numbers to demonstrate the real-world operational and time complexity differences—from O(n²) quadratic algorithms to O(n log n) and non-comparison sorting.
Display Guide:
• Bar Height: Value of the element
• Background Shading: Active working range & current elements being compared/swapped
• Bottom Ribbon: Fills in as elements reach their final sorted position
Algorithms Covered & Complexity:
1. Bubble Sort — Swapping neighbors only | O(n²)
2. Insertion Sort — Growing sorted prefix | O(n²)
3. Selection Sort — Minimal memory writes | O(n²)
4. Shell Sort — Insertion sort over shrinking gaps | O(n^1.3)
5. Merge Sort — Divide and conquer with external buffer | O(n log n)
6. Quicksort — In-place partitioning via median pivot | O(n log n)
7. Heap Sort — Max-heap structure sorting | O(n log n)
8. Radix Sort — Non-comparison digit bucketing | O(n)
Key Takeaway:
While Bubble Sort required ~9,000 operations, Radix Sort finished in just 384 operations—proving a ~23x efficiency gap on the exact same dataset. You dont need the numbers to see the difference!
[ESP32-S3 4.2 RLCD]
https://www.waveshare.com/esp32-s3-rlcd-4.2.htm?&aff_id=116255
#ESP32S3 #RLCD #SortingAlgorithm #AlgorithmVisualizer #EmbeddedSystems #Microcontroller #cpp #Electronics 8 Sorting Algorithms Side-by-Side on ESP32-S3 & RLCD](https://i.ytimg.com/vi/wu1zD7QWn2I/mqdefault.jpg)
![I Built an Apocalypse Radio with NO Internet and NO LoRa.
A zero-configuration, off-grid communication device that enables instant serverless Morse code chatting over long distances using ESP-NOW.
Morse-Link is a serverless, hardware-based communication platform engineered for pure decentralized messaging. By leveraging the ESP-NOW [LR PHY] protocol, this project enables reliable long-range communication entirely independent of cellular networks, Wi-Fi access points, or external servers. Designed with a zero-configuration, pairing-free architecture, devices instantly discover and transmit Morse code messages across decentralized nodes, making it a robust solution for off-grid communication and infrastructure-free field deployments.
While LoRa and ecosystems like Meshtastic are undoubtedly the gold standards for long-range off-grid communication, Morse-Link was born out of a different challenge: How far can we push decentralization using only standard Wi-Fi hardware? Instead of relying on extra RF modules, this project explores the absolute limits of a bare-bones ESP-NOW setup—proving that you can achieve incredible infrastructure-free range with zero pairing, zero apps, and just a single chip.
[Project Github]
https://github.com/0015/esp32-morse-keyer
[ESP32-C5 Mini Development Board]
https://www.waveshare.com/esp32-c5-zero.htm?&aff_id=116255
[Waveshare 0.85inch ScreenKey]
https://www.waveshare.com/0.85inch-screenkey.htm?&aff_id=116255
[2 x 6dBi 2.4GHz 5GHz Dual Band WiFi Antenna]
https://amzn.to/3SGawQW I Built an Apocalypse Radio with NO Internet and NO LoRa.](https://i.ytimg.com/vi/xKKQ8Q2ILn4/mqdefault.jpg)
![Offline MAP, GPS Tracker with E-Paper Display | Raspberry Pi Zero 2 W Portable Map Project
In this project, I built a portable offline GPS tracker using a Raspberry Pi Zero 2 W, a 7.3-inch color E-Paper display, and a GPS module. The system runs entirely without WiFi or cellular — just preload the map and go!
You can use this project for hiking, biking, travel, or any outdoor adventure. It’s battery-powered, sunlight-readable, and fully open source. I walk you through the entire process: from setting up the Pi, connecting the GPS and E-Paper, to mounting everything on a wooden board for portability.
Hardware Used:
- Raspberry Pi Zero 2 W
- Waveshare 7.3-inch Color E-Paper
- Reyax GNSS GPS Module
- 2x 18650 (4000mAh) battery pack
- Wooden board + standoffs (DIY-friendly)
Features:
- Live GPS coordinate tracking
- Visible in direct sunlight (E-Paper!)
- Runs all day on battery
- No internet required
- Lightweight and portable
Software Highlights:
- GPS data via UART serial
- Python script to update screen
- Screen only updates when location changes
In the next video, I’ll show how to add offline map tiles (MBTiles) to display your real-time location on an actual map!
(Next Project)[https://youtu.be/ggmhJsFT2ZE]
https://youtu.be/ggmhJsFT2ZE
[7.3inch E Ink Spectra 6 (E6) Full Color]
https://www.waveshare.com/7.3inch-e-paper-hat-e.htm?&aff_id=116255
https://amzn.to/3ZhvdDc
[18650 Battery Shield]
https://amzn.to/3H6OrVY
[REYAX GNSS Module]
https://amzn.to/4kldao2
https://www.digikey.com/en/products/detail/reyax/RYS352A/22206992 Offline MAP, GPS Tracker with E-Paper Display | Raspberry Pi Zero 2 W Portable Map Project](https://i.ytimg.com/vi/xLXnn48pIV4/mqdefault.jpg)
![Can a 6-Year-Old Talk & Play with a Robot Dog?
Would you hand your kid an LLM robot instead of an iPad? I did.
In this video, my child puts our dog-style interactive robot (ESP-Hi) through real, unscripted play.
Why this matters:
I think giving children this—rather than an iPad or a mobile phone—can satisfy their intellectual curiosity in a better way. It invites conversation, problem-solving, and real-world play instead of endless scrolling.
What you’ll notice:
Natural, kid-led dialogue (no scripted prompts)
Quick turn-taking and playful feedback
Encouraging tone that keeps kids trying again
Parent-guided, privacy-aware approach
About the build (ESP-Hi)
ESP-Hi is a ultra-low-cost conversational robot dog built on the ESP32-C3. Paired with a large language model (e.g., Xiaozhi AI), it supports natural, real-time dialogue. A mercury switch handles vibration wake-up and motion cues, while a 0.96-inch color display shows expressions. The robot performs 12+ actions. By leaning on the ESP32-C3’s built-in peripherals, it achieves audio capture and speech output with minimal extra hardware. Firmware-level optimizations reduce RAM/Flash usage so wake-word detection and multiple peripheral drivers run reliably in a tight resource budget.
[ESP-Hi: An ultra-low-cost AI conversational robot dog powered by ESP32-C3]
https://oshwhub.com/esp-college/esp-hi
(Currently, there is only a Chinese version.)
#ESP32 #LLM #Robotdog #ESPHi Can a 6-Year-Old Talk & Play with a Robot Dog?](https://i.ytimg.com/vi/xOQR-xgHLyI/mqdefault.jpg)
![Hands-On with NFC-Powered 4-Color E-Paper Display! | No Battery Needed!
I tested the new 1.54-inch four-color E-Paper display from Waveshare — and it’s powered entirely by your phone’s NFC!
No battery, no wires — just tap and update. A great little accessory for DIY projects, smart signage, or sharing info in style. Let’s hope more devices like this come out as the tech evolves!
[1.54inch Passive NFC-Powered e-Paper (G), Red/Yellow/Black/White (4-color)]
https://www.waveshare.com/1.54inch-nfc-powered-e-paper-g.htm?&aff_id=116255
#EPaper #Waveshare #NFCdisplay #TechReview #ThatProject Hands-On with NFC-Powered 4-Color E-Paper Display! | No Battery Needed!](https://i.ytimg.com/vi/yAHGwSfnSUA/mqdefault.jpg)