Uploaded December 2023 | Updated November 2026, 1 day ago
In this video, we dive into the realm of OFF-Grid connectivity by successfully establishing a seamless communication bridge between the T-Deck and iPhone using Meshtastic.
📡 Meshtastic's revolutionary mesh network empowers us to break free from traditional constraints, enabling communication even in remote and off-grid environments. Join us on this journey as we showcase the step-by-step process of setting up and experiencing the power of decentralized communication.
🔗 Explore the endless possibilities as we demonstrate the reliability and versatility of Meshtastic in facilitating secure and efficient data exchange between T-Deck and iPhone, completely independent of traditional network infrastructure.
🚀 #Meshtastic #OFFGridCommunication #LoRa 📱✨
In this video, we dive into the realm of OFF-Grid connectivity by successfully establishing a seamless communication bridge between the T-Deck and iPhone using Meshtastic.
📡 Meshtastic's revolutionary mesh network empowers us to break free from traditional constraints, enabling communication even in remote and off-grid environments. Join us on this journey as we showcase the step-by-step process of setting up and experiencing the power of decentralized communication.
🔗 Explore the endless possibilities as we demonstrate the reliability and versatility of Meshtastic in facilitating secure and efficient data exchange between T-Deck and iPhone, completely independent of traditional network infrastructure.
🚀 #Meshtastic #OFFGridCommunication #LoRa 📱✨
![I Built a REAL 3D Pokédex!
I built a real 3D Pokédex for my son using an ESP32-P4 and a 4-inch round touch display!
Even without a GPU, the ESP32-P4 handles simple low-poly 3D rendering with ease—bringing interactive 3D Pokémon, mini-games, and evolutions to life in real-time.
[ESP32-P4 4-Inch Round Display]
https://www.waveshare.com/esp32-p4-wifi6-touch-lcd-3.4c.htm?&aff_id=116255
https://amzn.to/4pSgNoT
#ESP32P4 #Pokemon #Pokedex #3DRendering #DIY #Maker #EmbeddedSystems I Built a REAL 3D Pokédex!](https://i.ytimg.com/vi/wpZwAqcCTaE/mqdefault.jpg)
![8 Sorting Algorithms Side-by-Side on ESP32-S3 & RLCD
Visualizing and benchmarking 8 classic sorting algorithms on a 4.2 Reflective LCD (400x300, 1-bit monochrome, no backlight) powered by an ESP32-S3 microcontroller.
All 8 algorithms are executed on the exact same dataset of 96 numbers to demonstrate the real-world operational and time complexity differences—from O(n²) quadratic algorithms to O(n log n) and non-comparison sorting.
Display Guide:
• Bar Height: Value of the element
• Background Shading: Active working range & current elements being compared/swapped
• Bottom Ribbon: Fills in as elements reach their final sorted position
Algorithms Covered & Complexity:
1. Bubble Sort — Swapping neighbors only | O(n²)
2. Insertion Sort — Growing sorted prefix | O(n²)
3. Selection Sort — Minimal memory writes | O(n²)
4. Shell Sort — Insertion sort over shrinking gaps | O(n^1.3)
5. Merge Sort — Divide and conquer with external buffer | O(n log n)
6. Quicksort — In-place partitioning via median pivot | O(n log n)
7. Heap Sort — Max-heap structure sorting | O(n log n)
8. Radix Sort — Non-comparison digit bucketing | O(n)
Key Takeaway:
While Bubble Sort required ~9,000 operations, Radix Sort finished in just 384 operations—proving a ~23x efficiency gap on the exact same dataset. You dont need the numbers to see the difference!
[ESP32-S3 4.2 RLCD]
https://www.waveshare.com/esp32-s3-rlcd-4.2.htm?&aff_id=116255
#ESP32S3 #RLCD #SortingAlgorithm #AlgorithmVisualizer #EmbeddedSystems #Microcontroller #cpp #Electronics 8 Sorting Algorithms Side-by-Side on ESP32-S3 & RLCD](https://i.ytimg.com/vi/wu1zD7QWn2I/mqdefault.jpg)
![I Built an Apocalypse Radio with NO Internet and NO LoRa.
A zero-configuration, off-grid communication device that enables instant serverless Morse code chatting over long distances using ESP-NOW.
Morse-Link is a serverless, hardware-based communication platform engineered for pure decentralized messaging. By leveraging the ESP-NOW [LR PHY] protocol, this project enables reliable long-range communication entirely independent of cellular networks, Wi-Fi access points, or external servers. Designed with a zero-configuration, pairing-free architecture, devices instantly discover and transmit Morse code messages across decentralized nodes, making it a robust solution for off-grid communication and infrastructure-free field deployments.
While LoRa and ecosystems like Meshtastic are undoubtedly the gold standards for long-range off-grid communication, Morse-Link was born out of a different challenge: How far can we push decentralization using only standard Wi-Fi hardware? Instead of relying on extra RF modules, this project explores the absolute limits of a bare-bones ESP-NOW setup—proving that you can achieve incredible infrastructure-free range with zero pairing, zero apps, and just a single chip.
[Project Github]
https://github.com/0015/esp32-morse-keyer
[ESP32-C5 Mini Development Board]
https://www.waveshare.com/esp32-c5-zero.htm?&aff_id=116255
[Waveshare 0.85inch ScreenKey]
https://www.waveshare.com/0.85inch-screenkey.htm?&aff_id=116255
[2 x 6dBi 2.4GHz 5GHz Dual Band WiFi Antenna]
https://amzn.to/3SGawQW I Built an Apocalypse Radio with NO Internet and NO LoRa.](https://i.ytimg.com/vi/xKKQ8Q2ILn4/mqdefault.jpg)
![Offline MAP, GPS Tracker with E-Paper Display | Raspberry Pi Zero 2 W Portable Map Project
In this project, I built a portable offline GPS tracker using a Raspberry Pi Zero 2 W, a 7.3-inch color E-Paper display, and a GPS module. The system runs entirely without WiFi or cellular — just preload the map and go!
You can use this project for hiking, biking, travel, or any outdoor adventure. It’s battery-powered, sunlight-readable, and fully open source. I walk you through the entire process: from setting up the Pi, connecting the GPS and E-Paper, to mounting everything on a wooden board for portability.
Hardware Used:
- Raspberry Pi Zero 2 W
- Waveshare 7.3-inch Color E-Paper
- Reyax GNSS GPS Module
- 2x 18650 (4000mAh) battery pack
- Wooden board + standoffs (DIY-friendly)
Features:
- Live GPS coordinate tracking
- Visible in direct sunlight (E-Paper!)
- Runs all day on battery
- No internet required
- Lightweight and portable
Software Highlights:
- GPS data via UART serial
- Python script to update screen
- Screen only updates when location changes
In the next video, I’ll show how to add offline map tiles (MBTiles) to display your real-time location on an actual map!
(Next Project)[https://youtu.be/ggmhJsFT2ZE]
https://youtu.be/ggmhJsFT2ZE
[7.3inch E Ink Spectra 6 (E6) Full Color]
https://www.waveshare.com/7.3inch-e-paper-hat-e.htm?&aff_id=116255
https://amzn.to/3ZhvdDc
[18650 Battery Shield]
https://amzn.to/3H6OrVY
[REYAX GNSS Module]
https://amzn.to/4kldao2
https://www.digikey.com/en/products/detail/reyax/RYS352A/22206992 Offline MAP, GPS Tracker with E-Paper Display | Raspberry Pi Zero 2 W Portable Map Project](https://i.ytimg.com/vi/xLXnn48pIV4/mqdefault.jpg)
![Can a 6-Year-Old Talk & Play with a Robot Dog?
Would you hand your kid an LLM robot instead of an iPad? I did.
In this video, my child puts our dog-style interactive robot (ESP-Hi) through real, unscripted play.
Why this matters:
I think giving children this—rather than an iPad or a mobile phone—can satisfy their intellectual curiosity in a better way. It invites conversation, problem-solving, and real-world play instead of endless scrolling.
What you’ll notice:
Natural, kid-led dialogue (no scripted prompts)
Quick turn-taking and playful feedback
Encouraging tone that keeps kids trying again
Parent-guided, privacy-aware approach
About the build (ESP-Hi)
ESP-Hi is a ultra-low-cost conversational robot dog built on the ESP32-C3. Paired with a large language model (e.g., Xiaozhi AI), it supports natural, real-time dialogue. A mercury switch handles vibration wake-up and motion cues, while a 0.96-inch color display shows expressions. The robot performs 12+ actions. By leaning on the ESP32-C3’s built-in peripherals, it achieves audio capture and speech output with minimal extra hardware. Firmware-level optimizations reduce RAM/Flash usage so wake-word detection and multiple peripheral drivers run reliably in a tight resource budget.
[ESP-Hi: An ultra-low-cost AI conversational robot dog powered by ESP32-C3]
https://oshwhub.com/esp-college/esp-hi
(Currently, there is only a Chinese version.)
#ESP32 #LLM #Robotdog #ESPHi Can a 6-Year-Old Talk & Play with a Robot Dog?](https://i.ytimg.com/vi/xOQR-xgHLyI/mqdefault.jpg)
![Hands-On with NFC-Powered 4-Color E-Paper Display! | No Battery Needed!
I tested the new 1.54-inch four-color E-Paper display from Waveshare — and it’s powered entirely by your phone’s NFC!
No battery, no wires — just tap and update. A great little accessory for DIY projects, smart signage, or sharing info in style. Let’s hope more devices like this come out as the tech evolves!
[1.54inch Passive NFC-Powered e-Paper (G), Red/Yellow/Black/White (4-color)]
https://www.waveshare.com/1.54inch-nfc-powered-e-paper-g.htm?&aff_id=116255
#EPaper #Waveshare #NFCdisplay #TechReview #ThatProject Hands-On with NFC-Powered 4-Color E-Paper Display! | No Battery Needed!](https://i.ytimg.com/vi/yAHGwSfnSUA/mqdefault.jpg)


![Overheating Issue? OV5640 Temperature Test with ESP32CAM board #overheating #issue #ESP32CAM #OV5640
OV5640 has more features than OV2640. In particular, you can have better image quality. It also has the same form factor as the OV2640, so it can be easily used on the ESP32CAM board. But for some reason, overheating issues occur. In this video, we will look at the reasons why overheating issues occur.
[OV5640 for ESP32 Camera (Compared to OV2640)]
https://youtu.be/BCvOBMQSliY
[Auto Focus with OV5640 on ESP32 AI-Thinker Board]
https://youtu.be/922BWy3OOoQ
#OV5640 #OV2640 #Temperature #Test #ESP32CAM Overheating Issue? OV5640 Temperature Test with ESP32CAM board #overheating #issue #ESP32CAM #OV5640](https://i.ytimg.com/vi/yzWiicnv-f8/mqdefault.jpg)
![We can make ESP32 for Matter device without code (ESP ZeroCode)
In order to create an ESP32 that operates based on the Matter framework, many preparations are required. But these have a very high barrier to entry for non-developers. You can create matter accessories with a few clicks through ZeroCode, which is officially serviced by Espressif, the ESP32 manufacturer.
[Make Matter Accessory with ESP32]
https://youtu.be/i2doZomr9V0?si=gFputJ1p8WGyP3_S
[Espressif ZeroCode]
https://zerocode.espressif.com/
#ZeroCode #matter #device #DevKitM #DevKitC #H2 #C3 #accessory #homekit #smartlamp #ESP32 #ThatProject We can make ESP32 for Matter device without code (ESP ZeroCode)](https://i.ytimg.com/vi/z9ZiNjNmmYg/mqdefault.jpg)
