Uploaded March 2022 | Updated September 2026, 6 hours ago
Testing the Primeweld CUT60 Plasma Cutter on 1/4" stainless steel plate review : #primeweld
I decided to test and review the Primeweld CUT60 on 1/4" stainless steel plate. Prime weld makes a powerful plasma cutter (cut60) capable of 7/8" on mild steel and I have cut 1" steel before. Check out my other channel if interested on mild steel test cuts.
Cut Weld N Grind
Jorge Serna
P.O Box 15186
Zapata Tx 78076
CutWeldNGrind@yahoo.com
Mild Steel 1" test cut
youtube.com/watch?v=ZOf9FsfjSjg
Plasma cutter link
https://primeweld.com/products/cut-60...
Consumables link
primeweld.com/products/cut60-plasma-cutter-consumables-20-piece-set
Amazon Link
https://www.amazon.com/PRIMEWELD-Non-...
Here is some information from the website.
PrimeWeld’s CUT60 Dual Voltage 110v/220v 60 Amp Plasma Cutter brings plenty of fabrication power to your shop. The 60 amp max rating cuts steel up to 7/8-inch thick. At 20 amps output, this plasma cutter will cut as thin as 22 gauge sheet metal. Like every PrimeWeld welding machine, we built the CUT60 Plasma Cutter to withstand the tough conditions found in real-world workplaces.
Dual-Voltage Input Makes It Useful at Home or Job
This plasma cutting machine features dual-voltage input with both 120-volt and 240-volt input power. It comes with a standard 3-pole 240 power cord and an adapter to plug into 120 volts. It has go-anywhere convenience that lets you tackle really tough cutting jobs, whether you have commercial power or want to plug it in at home.
POWERFUL AND READY FOR CNC PLASMA CUTTING TABLES
The PrimeWeld CUT60 110v 220v Plasma Cutter is excellent for CNC use. Plasma cutters that start the arc with high-frequency technology can interfere with digital electronics such as computers and cell phones, meaning welders can’t use them with a computer-controlled CNC plasma cutting table. This 60 amp plasma cutter solves that problem with a blowback pilot torch.
Testing the Primeweld CUT60 Plasma Cutter on 1/4" stainless steel plate review : #primeweld
I decided to test and review the Primeweld CUT60 on 1/4" stainless steel plate. Prime weld makes a powerful plasma cutter (cut60) capable of 7/8" on mild steel and I have cut 1" steel before. Check out my other channel if interested on mild steel test cuts.
Cut Weld N Grind
Jorge Serna
P.O Box 15186
Zapata Tx 78076
CutWeldNGrind@yahoo.com
Mild Steel 1" test cut
youtube.com/watch?v=ZOf9FsfjSjg
Plasma cutter link
https://primeweld.com/products/cut-60...
Consumables link
primeweld.com/products/cut60-plasma-cutter-consumables-20-piece-set
Amazon Link
https://www.amazon.com/PRIMEWELD-Non-...
Here is some information from the website.
PrimeWeld’s CUT60 Dual Voltage 110v/220v 60 Amp Plasma Cutter brings plenty of fabrication power to your shop. The 60 amp max rating cuts steel up to 7/8-inch thick. At 20 amps output, this plasma cutter will cut as thin as 22 gauge sheet metal. Like every PrimeWeld welding machine, we built the CUT60 Plasma Cutter to withstand the tough conditions found in real-world workplaces.
Dual-Voltage Input Makes It Useful at Home or Job
This plasma cutting machine features dual-voltage input with both 120-volt and 240-volt input power. It comes with a standard 3-pole 240 power cord and an adapter to plug into 120 volts. It has go-anywhere convenience that lets you tackle really tough cutting jobs, whether you have commercial power or want to plug it in at home.
POWERFUL AND READY FOR CNC PLASMA CUTTING TABLES
The PrimeWeld CUT60 110v 220v Plasma Cutter is excellent for CNC use. Plasma cutters that start the arc with high-frequency technology can interfere with digital electronics such as computers and cell phones, meaning welders can’t use them with a computer-controlled CNC plasma cutting table. This 60 amp plasma cutter solves that problem with a blowback pilot torch.
