TE Connectivity Cellular tab-mount antennas and evaluation boards - Unboxing | DigiKey @DigiKeyProductDiscovery
TE Connectivity Cellular tab-mount antennas and evaluation boards - Unboxing | DigiKey  @DigiKeyProductDiscovery
Uploaded January 2026 | Updated November 2026, 5 hours ago
We take a look at the cellular tab-mount antennas and evaluation boards from TE Connectivity. These high-efficiency low-profile antennas have a small ground plane requirement and provide omnidirectional coverage for IoT devices, smart security, and other connected devices.

Inside the box, you’ll find the evaluation board with the pre-installed antenna. These are available as the antenna only or the antenna mated with the matching circuit evaluation board, and for comparison, we have just the antenna as well. This model provides coverage from 698 megahertz to 3.8 gigahertz for cellular, GNSS, and Bluetooth, and measures just 55 by 15 millimeters.

In this demo, we’re going to connect two evaluation boards to a spectrum analyzer and its tracking generator so we can get an idea for how the antenna performs. You could just as easily connect this to a cellular modem or other board for evaluation in your actual application using the appropriate cables and adapters.

The evaluation board includes the 50 ohm matching networks, so we’re just using SMA to Type-N cables to connect between the SMA port on evaluation boards and the input and output ports on the spectrum analyzer. With both evaluation boards with antennas connected, we’re going to move one off camera to ensure it’s in the far field.

Our spectrum analyzer is setup from 500 megahertz to 1.5 gigahertz so we can see the first two bands of the antenna: 698 to 960 megahertz and 1452 to 1496 megahertz. We aren’t in an anechoic chamber with a proper characterization setup, but you can get an idea for how the antenna performs across those bands, and that’s true even as we change the orientation of the antenna thanks to its omnidirectional design.

digikey.com/en/products/detail/te-connectivity-linx/8-2479240-1/26808333
digikey.com/en/products/detail/te-connectivity-linx/2479240-1/26808322


Learn more:
Maker.io - digikey.com/en/maker
DigiKey’s Blog – TheCircuit digikey.com/en/blog
Connect with DigiKey on Facebook facebook.com/digikey.electronics
And follow us on X https://x.com/digikey
TE Connectivity Cellular tab-mount antennas and evaluation boards - Unboxing | DigiKeyPTCES Series Thermistors from Vishay PIO | DigiKeyBME690 4-in-1 Environmental Sensor from Bosch Sensortec PIO | DigiKeySilicon Labs SiXG301 - Unboxing | DigiKeyMAF06 Series Power Inductors from Laird Steward PIO | DigiKeyCarbon AM62 OSM-MF System-on-Module from Ezurio PIO | DigiKeyInfineon PSOC™ Edge E84 AI Evaluation Kit - Unboxing | DigiKeyUltra-Low Profile U.FL to VITA Cable Assemblies from Amphenol SV Microwave PIO | DigiKeyQPF5005 RF X-Band Transmit / Receive Module from Qorvo PIO | DigiKeyTRAVEO™ T2G CYT4BF MCU Family from Infineon PIO | DigiKeyECU-1270 Series Industrial IoT Gateway from Advantech PIO | DigiKeyRMAN High-Power Aluminum Nitride Substrate Chip Resistors from Stackpole PIO | DigiKey
DigiKey Product Discovery |

TE Connectivity Cellular tab-mount antennas and evaluation boards - Unboxing | DigiKey

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER