Uploaded May 2026 | Updated November 2026, 3 hours ago
We take a look at the SiXG301 Explorer Kit from Silicon Labs, supporting concurrent multi-protocol operation for Zigbee, Bluetooth LE, Bluetooth mesh, Matter, and Thread in demanding IoT applications.
Inside the box, you’ll find the very compact SiXG301 Explorer Board. You can see the SoC itself along with a USB-C connector and expansion via mikroBUS headers and a Qwiic connector.
In this demo we’ll use Simplicity Studio to program a Thermostat example and set it up in our smart home.
Plug in a USB-C cable to connect the board to your computer and you’ll see it recognized in Simplicity Studio.
Navigate to the example projects and demos, pick your demo, and click run to program it. You can also look at the documentation to see how it uses the buttons and LEDs on the Explorer Kit. Next we’re going to open a terminal and press button 0 to get a URL that will generate a QR code that we can scan to provision the device. Scan that with your smartphone and follow the prompts. Once completed, we can see an example temperature reading and set our desired temperatures and mode of operation, with information being pasted to the terminal for monitoring and debugging as well.
digikey.com/en/products/detail/silicon-labs/SIXG301-EK2719A/26865382
Maker.io - digikey.com/en/maker
DigiKey’s Blog – TheCircuit digikey.com/en/blog
Connect with DigiKey on Facebook facebook.com/digikey.electronics
And follow us on X https://x.com/digikey
We take a look at the SiXG301 Explorer Kit from Silicon Labs, supporting concurrent multi-protocol operation for Zigbee, Bluetooth LE, Bluetooth mesh, Matter, and Thread in demanding IoT applications.
Inside the box, you’ll find the very compact SiXG301 Explorer Board. You can see the SoC itself along with a USB-C connector and expansion via mikroBUS headers and a Qwiic connector.
In this demo we’ll use Simplicity Studio to program a Thermostat example and set it up in our smart home.
Plug in a USB-C cable to connect the board to your computer and you’ll see it recognized in Simplicity Studio.
Navigate to the example projects and demos, pick your demo, and click run to program it. You can also look at the documentation to see how it uses the buttons and LEDs on the Explorer Kit. Next we’re going to open a terminal and press button 0 to get a URL that will generate a QR code that we can scan to provision the device. Scan that with your smartphone and follow the prompts. Once completed, we can see an example temperature reading and set our desired temperatures and mode of operation, with information being pasted to the terminal for monitoring and debugging as well.
digikey.com/en/products/detail/silicon-labs/SIXG301-EK2719A/26865382
Maker.io - digikey.com/en/maker
DigiKey’s Blog – TheCircuit digikey.com/en/blog
Connect with DigiKey on Facebook facebook.com/digikey.electronics
And follow us on X https://x.com/digikey










