Tape Speeds @MrAudioSoundImages
Tape Speeds  @MrAudioSoundImages
Uploaded June 2016 | Updated November 2026, 3 hours ago
Just after World War II, Jack Mullin of the US Signal Corp appropriated two AEG Magnetophone tape recorders from a German radio station in Bad Nauheim (near Frankfurt), disassembled them, and sent them to San Francisco, along with manuals. These recorders ran at 100 cm per second, a nice round number in the metric system.
Mullin later modified the Magnetophone to run with motors that worked with 60 Hz US power and slowed the tape speed from 39.4 to 30 inches per second, a nice round number in the English system. Since then, 30 ips has been a multiple of all standard audio tape speeds worldwide.
For example, professional multitrack tape recorders use tape speeds of both 15 and 30 ips. Reel-to-reel for radio and some reel--to-reel commercial recordings were at 7 ½ ips. Lear 8-track cartridges, 3M-Quickload cartridges, Elcasets, and other commercial releases on consumer reel-to-reel tape ran at at 3 ¾ ips. Compact cassette speed is 1 7/8 ips. Microcassettes run at 15/16 ips, as well as books on compact cassettes distributed by the Library of Congress for the blind and visually impaired. Microcassette also have a secondary tape speed of 15/32 ips.
Higher multiples of 30 ips are used by instrumentation recorders, DASH (digital audio stationary head) recorders, and loop bin duplicators.
With digital audio, the quality improves as the sample rate and bit depth increase. With analog audio, the quality improves as the tape speed increases, since as the tape moves faster, a higher number of the oxide particles pass over the head, and better define the high frequencies.
Tape SpeedsHow FM Radio BeganBass TrapNapsterConcert PitchModular SynthsDampeningAnalog MaintenanceThe Electric GuitarFound MusicDisc AllocationIMAX and OMNIMAX
MrAudioSoundImages |

Tape Speeds

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER