Uploaded August 2016 | Updated November 2026, 3 hours ago
In order to "deaden" a room, that is to make a room less reverberant, several techniques can be employed. Making the walls non-parallel, and using diffusers to eliminate standing wave patterns is helpful. Deadening can also be achieved by addressing the wall surfaces.
Materials like fiberglass and Roxul insulation placed on the wall can absorb sound and prevent it from being reflected. Anechoic foam like Sonex, Auralex, and others also are helpful in absorbing sound.
However, even though applying these materials directly to the wall will absorb most frequencies, they're usually not thick enough for the longer wavelengths, so they're not as effective at low frequencies.
One way to absorb low frequencies, without having to extend the insulation far out into the room, like in an anechoic chamber, is to use a bass trap. It works like this. Pieces of dry wall or particle board are each surrounded by a wrap of fiberglass, Roxul, or other sound absorbing material. These "pillows" of insulation are then hung from the ceiling perpendicular to the nearest wall several inches apart. They're suspended on wires so that they can freely move.
They're usually hidden by a soffit that's covered by acoustical fabric. The low-frequency waves pass through the fabric and strike the sound deadening material. Then, since the panels not only have some depth, but can also actually move slightly when disturbed by the sound waves, the low frequency is nearly completely absorbed, instead of being reflected back into the room.
In order to "deaden" a room, that is to make a room less reverberant, several techniques can be employed. Making the walls non-parallel, and using diffusers to eliminate standing wave patterns is helpful. Deadening can also be achieved by addressing the wall surfaces.
Materials like fiberglass and Roxul insulation placed on the wall can absorb sound and prevent it from being reflected. Anechoic foam like Sonex, Auralex, and others also are helpful in absorbing sound.
However, even though applying these materials directly to the wall will absorb most frequencies, they're usually not thick enough for the longer wavelengths, so they're not as effective at low frequencies.
One way to absorb low frequencies, without having to extend the insulation far out into the room, like in an anechoic chamber, is to use a bass trap. It works like this. Pieces of dry wall or particle board are each surrounded by a wrap of fiberglass, Roxul, or other sound absorbing material. These "pillows" of insulation are then hung from the ceiling perpendicular to the nearest wall several inches apart. They're suspended on wires so that they can freely move.
They're usually hidden by a soffit that's covered by acoustical fabric. The low-frequency waves pass through the fabric and strike the sound deadening material. Then, since the panels not only have some depth, but can also actually move slightly when disturbed by the sound waves, the low frequency is nearly completely absorbed, instead of being reflected back into the room.








