Uploaded December 2021 | Updated September 2026, 2 days ago
This is my third Ardupilot build, this time is a Talon Pro airframe which is made for long-range and FPV flights. This video will show you the process to put it together, the mistakes I did and the maiden flight. Including a Karen (drone hater) at the end of the video.
Talon pro Airframe: bit.ly/3IWmmwY
★ To see the entire list of components and read more about the project visit the article:
★ joyplanes.com/en/long-range-fpv-ardupilot
Fix the flight controller youtu.be/SBJQCZKvf68
✈ Video Index ✈
0:00 Intro
0:56 Unboxing
1:14 Flight controller
1:21 Build
2:48 Connectors
4:50 CG
5:29 Flight Attempt
9:50 V-tail issue
12:06 Maiden Flight
14:06 Crazy person
Join our Discord server: discord.gg/sDAMuK9xFt
Website
joyplanes.com
Become one of us:
goo.gl/zKQ706
Facebook
facebook.com/joyplanesrc
Instagram
instagram.com/joyplanes
This project makes use of the most popular autopilot software, Ardupilot, specifically Arduplane firmware which is the one I'm using for this build, installing the firmware using mission planner and using a Matek F405 Wing. Also using a digital airspeed sensor and GPS, the plane is equipped with an FPV camera to allow for OSD visualization and be able to fly via FPV.
#JoyplanesRC #HobbyRC
This is my third Ardupilot build, this time is a Talon Pro airframe which is made for long-range and FPV flights. This video will show you the process to put it together, the mistakes I did and the maiden flight. Including a Karen (drone hater) at the end of the video.
Talon pro Airframe: bit.ly/3IWmmwY
★ To see the entire list of components and read more about the project visit the article:
★ joyplanes.com/en/long-range-fpv-ardupilot
Fix the flight controller youtu.be/SBJQCZKvf68
✈ Video Index ✈
0:00 Intro
0:56 Unboxing
1:14 Flight controller
1:21 Build
2:48 Connectors
4:50 CG
5:29 Flight Attempt
9:50 V-tail issue
12:06 Maiden Flight
14:06 Crazy person
Join our Discord server: discord.gg/sDAMuK9xFt
Website
joyplanes.com
Become one of us:
goo.gl/zKQ706
facebook.com/joyplanesrc
instagram.com/joyplanes
This project makes use of the most popular autopilot software, Ardupilot, specifically Arduplane firmware which is the one I'm using for this build, installing the firmware using mission planner and using a Matek F405 Wing. Also using a digital airspeed sensor and GPS, the plane is equipped with an FPV camera to allow for OSD visualization and be able to fly via FPV.
#JoyplanesRC #HobbyRC
