Uploaded July 2018 | Updated September 2026, 16 hours ago
This time I'll make an RC racing boat made out of foam board. This boat is capable of reaching high speeds, in this video, you'll see the entire process and the struggle of building something I don't have too much experience with.
In the end, it turned out well, after several modifications and attempts the RC boat now works really good. This boat can be considered to be homemade since it was all built from scratch with simple and cheap materials.
🔲 I used:
Motor GoolRC 2968
rcmoment.com/p-rm7256.html?aid=box528
Coupon: A7256 ($5 discount)
ESC 125A
rcmoment.com/p-rm2363.html?aid=box528
Coupon: A2363 ($5 discount)
RC Moment store
rcmoment.com/?aid=box528
Cupón: A3748 (Ordena lo que sea con 10% menos)
Radio and receiver Flysky goo.gl/LhyxdG
Option 2 goo.gl/HLGtuc
Propeller shaft goo.gl/yAeqmw
Universal joint goo.gl/pqfCdE (check measurement)
Universal joint 2 goo.gl/zGRWZe
Propellers goo.gl/wHwy7J
Thread lock goo.gl/Uuc12U
Standard servo goo.gl/6FoZ6g
M3 goo.gl/ofoLxG
Connector XT60 goo.gl/kB4BRp
4mm bearings goo.gl/HaFs8F
Battery 4S de 4000 mAh goo.gl/nMWKuQ
Download plans and files of the boat here:
goo.gl/3GrzDh
Plans: bit.ly/2W38BDg (Spanish descriptions)
Video in Spanish
youtu.be/rK3JSAahJpo
Subscribe:
goo.gl/zKQ706
Instagram
instagram.com/joyplanes
Process description. I used foam board to build the boat, according to the design I made before in Fusion 360, I made 2D projections of the pieces to print the templates and then transferred them to the board to cut them. I glued the panels respectively and made the final shape of the boat, I also covered the outside part with fiberglass just like a surfboard would. This boat is 1 meter in length and it is the biggest I've built yet.
This time I'll make an RC racing boat made out of foam board. This boat is capable of reaching high speeds, in this video, you'll see the entire process and the struggle of building something I don't have too much experience with.
In the end, it turned out well, after several modifications and attempts the RC boat now works really good. This boat can be considered to be homemade since it was all built from scratch with simple and cheap materials.
🔲 I used:
Motor GoolRC 2968
rcmoment.com/p-rm7256.html?aid=box528
Coupon: A7256 ($5 discount)
ESC 125A
rcmoment.com/p-rm2363.html?aid=box528
Coupon: A2363 ($5 discount)
RC Moment store
rcmoment.com/?aid=box528
Cupón: A3748 (Ordena lo que sea con 10% menos)
Radio and receiver Flysky goo.gl/LhyxdG
Option 2 goo.gl/HLGtuc
Propeller shaft goo.gl/yAeqmw
Universal joint goo.gl/pqfCdE (check measurement)
Universal joint 2 goo.gl/zGRWZe
Propellers goo.gl/wHwy7J
Thread lock goo.gl/Uuc12U
Standard servo goo.gl/6FoZ6g
M3 goo.gl/ofoLxG
Connector XT60 goo.gl/kB4BRp
4mm bearings goo.gl/HaFs8F
Battery 4S de 4000 mAh goo.gl/nMWKuQ
Download plans and files of the boat here:
goo.gl/3GrzDh
Plans: bit.ly/2W38BDg (Spanish descriptions)
Video in Spanish
youtu.be/rK3JSAahJpo
Subscribe:
goo.gl/zKQ706
instagram.com/joyplanes
Process description. I used foam board to build the boat, according to the design I made before in Fusion 360, I made 2D projections of the pieces to print the templates and then transferred them to the board to cut them. I glued the panels respectively and made the final shape of the boat, I also covered the outside part with fiberglass just like a surfboard would. This boat is 1 meter in length and it is the biggest I've built yet.
