Uploaded March 2026 | Updated September 2026, 2 weeks ago
Tonight I'm taking the Vac-Plate & Puc Workholding Kit from Swan Tool Group for a spin. I'm using it on my CNC table since I use that a lot for things in the shop. This comes with a Vac Plate to attach to your Grabo lifting tool that connects via vacuum tubes to one or two of the included Vac Pucs.
My CNC table has the T-track installed at the same level as the bottom of the MDF so I used some slightly longer 1/4-20 machine screws with the included nuts to hold the pucs in place. This is super easy to set up and the vacuum holds everything with no movement.
Check out all of the great tools at
swantoolgroup.com
@SwanToolGroup-stg @Grabotools @izzyswan #swantoolgroup #grabo #gifted #tools #vacuum
Tonight I'm taking the Vac-Plate & Puc Workholding Kit from Swan Tool Group for a spin. I'm using it on my CNC table since I use that a lot for things in the shop. This comes with a Vac Plate to attach to your Grabo lifting tool that connects via vacuum tubes to one or two of the included Vac Pucs.
My CNC table has the T-track installed at the same level as the bottom of the MDF so I used some slightly longer 1/4-20 machine screws with the included nuts to hold the pucs in place. This is super easy to set up and the vacuum holds everything with no movement.
Check out all of the great tools at
swantoolgroup.com
@SwanToolGroup-stg @Grabotools @izzyswan #swantoolgroup #grabo #gifted #tools #vacuum
