Uploaded June 2024 | Updated November 2026, 4 days ago
This upload is outdated. See the full, unabridged, single segment video here: youtu.be/tzMbBh9dTWA
This is the full, unabridged Any% No A Button run, split into 8 parts to fit under YouTube's uploading restrictions. Anything over 12 hours will result in the processing being abandoned, so I've split it into 8 roughly equally sized chunks. My apologies for not having this up sooner, but the raw 87 hour file was simply too much for Windows's native trimming software to handle, so I had to render them in Vegas. This roughly doubled the overall file size in an attempt to avoid information loss/video artifacting, and while it was all ready to upload within days, being an over the road truck driver makes this difficult, as 200 GB is simply too much to upload over mobile data.
Part 1: youtu.be/XdkQCTLJVPE
Part 2: (this video)
Part 3: youtu.be/i7oXGFix7IA
Part 4: youtu.be/ZJySk_hghOc
Part 5: youtu.be/AK4i7FIBjks
Part 6: youtu.be/qeuI4VEnqAA
Part 7: youtu.be/ZkgpmiLNIKI
Part 8: youtu.be/1o-MGUM-O1I
Abridged: youtu.be/qi6PEt0J0sA
And now for the description no one reads :)
Shortly after finishing my 2xA run last October, I claimed there were still a few things I wanted to look at, one of which being Chuckya Drop, which was the solution to one of the only two A presses in the run, the other being the obvious BitFS rising platforms on Wii VC, which I didn't use because doing so for anything other than a perfectly optimized run seemed pointless. The run including a 1xA BitS opener was already fairly impressive, but with how consistent I had gotten with the double misalignment opener, surely something could be done for chuckya too, considering its movement is entirely deterministic.
One thing I had asked pannen to do when he was looking for a double misa setup for me was to find a set of backup movement for me after I got the first misa, in case I failed the second misa in a way that kept me on the platform. Although he did find one, I decided not to use it for the 2xA run because I felt confident enough with the double misa, but the fact that he found one was good news for Chuckya Drop, as it requires Mario to drop down to turn chuckya. The one he found wasn't compatible with the turning, though, so I asked him to find one that was and he delivered.
Meanwhile, I would still need a way to get up onto the blue block, so I analyzed that and found that the blue block doesn't quite come all the way to the edge of the gray platform underneath. The perfect set of conditions for a glitchy ledge grab. Unfortunately it wasn't as simple as just punching off, but a short low magnitude side strain to get you off the wall was the only extra thing you needed. That takes away the requirement of hitting a misalignment on a moving platform, which was a HUGE relief. From there it was simply a matter of finding a set of inputs that got the chuckya to a good position.
After a little bit of digging, I found a sweet spot for the first phase and tasked pannen to find a set of inputs for the last phase, which once again he delivered. Over the course of the next two months I kept finding improvement after improvement that made the whole thing more consistent for me to do. One of those improvements was instead of planning to break out of the chuckya's grasp with a measly ~30% to succeed even if I did break free, I could get the chuckya to the edge and abuse the same mechanic that makes the throws a 50% chance in wet dry world. Suddenly it was seeming more and more feasible.
The biggest change, was allowing B to be pressed at the end of a set of inputs instead of at the start. While a seemingly small change, this actually meant I could use the same hand motion for both unpausing and repausing, which meant functionally it was no different than just a standard pause buffer, so long as my button inputs were synchronized. This was a game changer for consistency, and before I knew it my consistency with *the rest of Chuckya Drop after the 1xA opener* came to about 50%. Tack on a 56% for a successful chuckya throw, and you've got yourself an rta viable chuckya drop.
From there, all that was left was to remove the 0.5xA presses from the 2xA run, and to improve my execution of it to make it more watchable. That run pause buffered EVERYWHERE, needed to retry in so many places, it was honestly embarrassing. I simply wasn't gonna let this run be a repeat of that, so the additional 5 months between that run and this run was spent endlessly practicing, making things more consistent and removing pause buffers wherever I could do so, so long as it didn't take a significant hit to consistency, and this was the result. It's been a long time coming, but SM64 has finally been beat without the A button.
Now time to start practicing for 120abc...
This upload is outdated. See the full, unabridged, single segment video here: youtu.be/tzMbBh9dTWA
This is the full, unabridged Any% No A Button run, split into 8 parts to fit under YouTube's uploading restrictions. Anything over 12 hours will result in the processing being abandoned, so I've split it into 8 roughly equally sized chunks. My apologies for not having this up sooner, but the raw 87 hour file was simply too much for Windows's native trimming software to handle, so I had to render them in Vegas. This roughly doubled the overall file size in an attempt to avoid information loss/video artifacting, and while it was all ready to upload within days, being an over the road truck driver makes this difficult, as 200 GB is simply too much to upload over mobile data.
Part 1: youtu.be/XdkQCTLJVPE
Part 2: (this video)
Part 3: youtu.be/i7oXGFix7IA
Part 4: youtu.be/ZJySk_hghOc
Part 5: youtu.be/AK4i7FIBjks
Part 6: youtu.be/qeuI4VEnqAA
Part 7: youtu.be/ZkgpmiLNIKI
Part 8: youtu.be/1o-MGUM-O1I
Abridged: youtu.be/qi6PEt0J0sA
And now for the description no one reads :)
Shortly after finishing my 2xA run last October, I claimed there were still a few things I wanted to look at, one of which being Chuckya Drop, which was the solution to one of the only two A presses in the run, the other being the obvious BitFS rising platforms on Wii VC, which I didn't use because doing so for anything other than a perfectly optimized run seemed pointless. The run including a 1xA BitS opener was already fairly impressive, but with how consistent I had gotten with the double misalignment opener, surely something could be done for chuckya too, considering its movement is entirely deterministic.
One thing I had asked pannen to do when he was looking for a double misa setup for me was to find a set of backup movement for me after I got the first misa, in case I failed the second misa in a way that kept me on the platform. Although he did find one, I decided not to use it for the 2xA run because I felt confident enough with the double misa, but the fact that he found one was good news for Chuckya Drop, as it requires Mario to drop down to turn chuckya. The one he found wasn't compatible with the turning, though, so I asked him to find one that was and he delivered.
Meanwhile, I would still need a way to get up onto the blue block, so I analyzed that and found that the blue block doesn't quite come all the way to the edge of the gray platform underneath. The perfect set of conditions for a glitchy ledge grab. Unfortunately it wasn't as simple as just punching off, but a short low magnitude side strain to get you off the wall was the only extra thing you needed. That takes away the requirement of hitting a misalignment on a moving platform, which was a HUGE relief. From there it was simply a matter of finding a set of inputs that got the chuckya to a good position.
After a little bit of digging, I found a sweet spot for the first phase and tasked pannen to find a set of inputs for the last phase, which once again he delivered. Over the course of the next two months I kept finding improvement after improvement that made the whole thing more consistent for me to do. One of those improvements was instead of planning to break out of the chuckya's grasp with a measly ~30% to succeed even if I did break free, I could get the chuckya to the edge and abuse the same mechanic that makes the throws a 50% chance in wet dry world. Suddenly it was seeming more and more feasible.
The biggest change, was allowing B to be pressed at the end of a set of inputs instead of at the start. While a seemingly small change, this actually meant I could use the same hand motion for both unpausing and repausing, which meant functionally it was no different than just a standard pause buffer, so long as my button inputs were synchronized. This was a game changer for consistency, and before I knew it my consistency with *the rest of Chuckya Drop after the 1xA opener* came to about 50%. Tack on a 56% for a successful chuckya throw, and you've got yourself an rta viable chuckya drop.
From there, all that was left was to remove the 0.5xA presses from the 2xA run, and to improve my execution of it to make it more watchable. That run pause buffered EVERYWHERE, needed to retry in so many places, it was honestly embarrassing. I simply wasn't gonna let this run be a repeat of that, so the additional 5 months between that run and this run was spent endlessly practicing, making things more consistent and removing pause buffers wherever I could do so, so long as it didn't take a significant hit to consistency, and this was the result. It's been a long time coming, but SM64 has finally been beat without the A button.
Now time to start practicing for 120abc...
![DDD: Board Bowsers Sub 0x [RTA]
I found a setup that goes as follows: Actively manipulate the camera so that its as close to directly behind Mario as possible. Sidle against the wall, the closer to the ledge the better since time is of the essence. Neutral joystick, then with the camera directly behind Mario, walk straight forwards and press Z. If the camera isnt directly behind Mario, youll have to adjust the joystick slightly. By walking straight forwards and pressing Z, youll go into crawling immediately. Turn to the right for 3 frames, then stop and start crawling to give the camera a moment to catch up. Crawl right up to the ledge, which will be when you can see half a fist sized bit of water between Mario and the cork box. Stop crawling, then do a standing punch. Neutral joystick for 2 frames, then full left strain for 2 frames. This gets Mario in the misalignment every time, and even with a little bit of wiggle room for if you didnt get the camera movement perfectly right.
Some people have decent luck with just yoloing it. I absolutely d0 not, and can not do this without the setup. DDD: Board Bowsers Sub 0x [RTA]](https://i.ytimg.com/vi/v4EHFPlAWbk/mqdefault.jpg)
![Pannens Ice Hack: Coins Amassed in a Maze + 100c [RTA]
@pannenkoek2012 made a romhack that replaced all of Marios movement with ice physics. Initially intended for a 16 star run, I decided to take it a step further and go for max stars, and this is easily one of the more frustrating stars. Pannens Ice Hack: Coins Amassed in a Maze + 100c [RTA]](https://i.ytimg.com/vi/vMOIuae_5D0/mqdefault.jpg)

![TTM: Scale the Mountain 0xA 3:01.97 [RTA]
After I figured out what I was doing wrong for the ghost rollout, I said I was gonna take a break to give my thumb a rest. Well this star was too alluring to leave alone and I had to go for the record.
This is an improvement over the previous record by over 2 minutes. TTM: Scale the Mountain 0xA 3:01.97 [RTA]](https://i.ytimg.com/vi/vsrN8bHtSLM/mqdefault.jpg)

![JRB: Center of the Jet Stream setup [RTA]
Setup found by @pannenkoek2012 after making and running a brute forcer to look for setups compatible with RTA inputs.
To see a proper execution of this setup, check out this video here: https://youtu.be/Fc2cXpbgVjA?t=6m45s JRB: Center of the Jet Stream setup [RTA]](https://i.ytimg.com/vi/xO05tSB0lFw/mqdefault.jpg)
![WDW: Express Elevator - Hurry Up!! 0xA [RTA]
This is not a community improvement. This star has already been done 0xA RTA by Ivan178, which can be found here: https://youtu.be/miJtpYtLy8o . Ive been planning my route for my Any% 0xA run and came to 69 stars, so I needed to figure out what the 70th would end up being. After a lot of thought, I eventually devised a plan thats quite similar to the one @pannenkoek2012 had made prior, which is the one Ivan178 had used. Instead of getting three 50/50 throws, I could do with only one, so long as I did it very carefully. This is the first useful example of a Type 3 (transport) CWT, which is where you grab the Chuckya and bring him somewhere else. When Mario is holding onto an object, in most cases, the real object is made invisible and intangible and left exactly where Mario grabbed it, up until Mario releases the object. This is the case for Chuckya, so by grabbing Chuckya and moving elsewhere, the anchor stays right where we grabbed it at (as Chuckya is not being rendered). From there, we can simply get Mario BCA, walk in front of the HOLP, and release the Chuckya. This will have the result of keeping the Chuckya unrendered the whole time, so that Chuckya throws Mario to the anchor, which is still where we initially grabbed Chuckya at.
What this does is transports the Chuckya elsewhere while putting us back where we grabbed it. In this case, though, the slope of the gray platform where we performed the CWT is used to trigger the ledge failsafe for the Chuckya, giving a 50% chance of throwing in the direction we want, which is onto the plank. From there, we make our way over to the top of the elevator cage, trigger the elevator, and drop into the water by the Chuckya. We time this movement with the oscillation of the water, to make it as shallow as possible next to the Chuckya. Water grab defaults to light holding, so we grab Chuckya light via water, but this leaves us unable to do anything in the water. So this grab also needs to give us enough momentum to surface, hence timing it with the oscillation of the water. From there, we simply climb the slope and throw the Chuckya, resulting in it pushing us through the wall and onto the elevator. WDW: Express Elevator - Hurry Up!! 0xA [RTA]](https://i.ytimg.com/vi/xOe4SpQvT1c/mqdefault.jpg)

![TTM: Scale the Mountain 0x 1037 no preset HOLP [RTA]
I originally had planned on making a goomba bridge to cross the gap, but BillyWAR had asked me to find a setup to clone the bobomb in TTM. I presented him with one, but then it occurred to me that I could bobomb glide since now I have a consistent way of cloning the bobomb. He showed me that he already had a setup for doing the bobomb glide, as well as a way of getting the star 0x with a goomba clone. I took it a step further and found a consistent way of cloning a goomba despite all the changing object slots along the way, and went ahead and executed it, using his setup for the bobomb glide. This makes it doable in a max stars 0x run (either with wii VC or starting from a 2 key file). TTM: Scale the Mountain 0x 1037 no preset HOLP [RTA]](https://i.ytimg.com/vi/xfbTuoW7sy0/mqdefault.jpg)

