Uploaded December 2023 | Updated November 2026, 1 day ago
This is not a community improvement. This star has already been done 0xA RTA by Ivan178, which can be found here: youtu.be/miJtpYtLy8o . I've been planning my route for my Any% 0xA run and came to 69 stars, so I needed to figure out what the 70th would end up being. After a lot of thought, I eventually devised a plan that's quite similar to the one @pannenkoek2012 had made prior, which is the one Ivan178 had used. Instead of getting three 50/50 throws, I could do with only one, so long as I did it very carefully. This is the first useful example of a Type 3 (transport) CWT, which is where you grab the Chuckya and bring him somewhere else. When Mario is holding onto an object, in most cases, the real object is made invisible and intangible and left exactly where Mario grabbed it, up until Mario releases the object. This is the case for Chuckya, so by grabbing Chuckya and moving elsewhere, the anchor stays right where we grabbed it at (as Chuckya is not being rendered). From there, we can simply get Mario BCA, walk in front of the HOLP, and release the Chuckya. This will have the result of keeping the Chuckya unrendered the whole time, so that Chuckya throws Mario to the anchor, which is still where we initially grabbed Chuckya at.
What this does is transports the Chuckya elsewhere while putting us back where we grabbed it. In this case, though, the slope of the gray platform where we performed the CWT is used to trigger the ledge failsafe for the Chuckya, giving a 50% chance of throwing in the direction we want, which is onto the plank. From there, we make our way over to the top of the elevator cage, trigger the elevator, and drop into the water by the Chuckya. We time this movement with the oscillation of the water, to make it as shallow as possible next to the Chuckya. Water grab defaults to light holding, so we grab Chuckya light via water, but this leaves us unable to do anything in the water. So this grab also needs to give us enough momentum to surface, hence timing it with the oscillation of the water. From there, we simply climb the slope and throw the Chuckya, resulting in it pushing us through the wall and onto the elevator.
This is not a community improvement. This star has already been done 0xA RTA by Ivan178, which can be found here: youtu.be/miJtpYtLy8o . I've been planning my route for my Any% 0xA run and came to 69 stars, so I needed to figure out what the 70th would end up being. After a lot of thought, I eventually devised a plan that's quite similar to the one @pannenkoek2012 had made prior, which is the one Ivan178 had used. Instead of getting three 50/50 throws, I could do with only one, so long as I did it very carefully. This is the first useful example of a Type 3 (transport) CWT, which is where you grab the Chuckya and bring him somewhere else. When Mario is holding onto an object, in most cases, the real object is made invisible and intangible and left exactly where Mario grabbed it, up until Mario releases the object. This is the case for Chuckya, so by grabbing Chuckya and moving elsewhere, the anchor stays right where we grabbed it at (as Chuckya is not being rendered). From there, we can simply get Mario BCA, walk in front of the HOLP, and release the Chuckya. This will have the result of keeping the Chuckya unrendered the whole time, so that Chuckya throws Mario to the anchor, which is still where we initially grabbed Chuckya at.
What this does is transports the Chuckya elsewhere while putting us back where we grabbed it. In this case, though, the slope of the gray platform where we performed the CWT is used to trigger the ledge failsafe for the Chuckya, giving a 50% chance of throwing in the direction we want, which is onto the plank. From there, we make our way over to the top of the elevator cage, trigger the elevator, and drop into the water by the Chuckya. We time this movement with the oscillation of the water, to make it as shallow as possible next to the Chuckya. Water grab defaults to light holding, so we grab Chuckya light via water, but this leaves us unable to do anything in the water. So this grab also needs to give us enough momentum to surface, hence timing it with the oscillation of the water. From there, we simply climb the slope and throw the Chuckya, resulting in it pushing us through the wall and onto the elevator.

![TTM: Scale the Mountain 0x 1037 no preset HOLP [RTA]
I originally had planned on making a goomba bridge to cross the gap, but BillyWAR had asked me to find a setup to clone the bobomb in TTM. I presented him with one, but then it occurred to me that I could bobomb glide since now I have a consistent way of cloning the bobomb. He showed me that he already had a setup for doing the bobomb glide, as well as a way of getting the star 0x with a goomba clone. I took it a step further and found a consistent way of cloning a goomba despite all the changing object slots along the way, and went ahead and executed it, using his setup for the bobomb glide. This makes it doable in a max stars 0x run (either with wii VC or starting from a 2 key file). TTM: Scale the Mountain 0x 1037 no preset HOLP [RTA]](https://i.ytimg.com/vi/xfbTuoW7sy0/mqdefault.jpg)


![Pannens Ice Hack: Snowmans Lost His Head [TAS]
This is TAS
While this is technically inaccessible by virtue of Big Penguin Race being TAS only, this seems like it would also be quite difficult RTA as well. I dont care to try that out so I made this as a TAS, since its not realistically attainable RTA anyway. 118 stars in the hack RTA, 120 TAS. I am done with this hack now, what a nightmare. Pannens Ice Hack: Snowmans Lost His Head [TAS]](https://i.ytimg.com/vi/z-rmUkebmXo/mqdefault.jpg)

![DDD: The Manta Rays Reward 0xA consistent strat [RTA]
This star is very annoying. Not much to say about it, just found a point to start from with a path to take that gets the 5 rings consistently. DDD: The Manta Rays Reward 0xA consistent strat [RTA]](https://i.ytimg.com/vi/zOGnJY66e2A/mqdefault.jpg)
![SMSR: Bowsers Slippery Swamp Replica 9xA [TAS]
We collect the replica star for Bowsers Slippery Swamp, the 1st Bowser course, in 9x A presses. This is TAS. This is an improvement on the previous record of 10x, which was done by Sidney and can be found here https://youtu.be/XOWjueO3DwQ
It was hypothesized for a while that there was a chance this could be done with more optimal wall kicks. I had my doubts, but decided to look around the stage for hyperspeed methods, since a hyperjump would have the potential to make it all the way to the top in just a single A press. After multiple different analyses of the stage, I concluded that it wasnt possible and settled on trying to optimize the wall kicks. The idea I landed on was fairly simple; a glitchy wall kick. If you dont know because you mainly follow the A button challenge instead of speedruns, the most typical kind of glitchy wall kick is the quarter frame kind, which is where you bonk on one quarter frame but by the end of the frame you have a different referenced wall, allowing you to wall kick off of a wall with a much shallower angle than you would otherwise be able to. The 10xA strat loses a ton of height by doing the wall kick on the farther column, so if you could pull off the GWK then it would eliminate that height loss.
I managed to get the GWK and get to the top, but I was a little too low to get the ledge grab at the very end, so I enlisted the help of @Crackhex, and she managed to not only get the wall kick from a jump that starts a frame sooner (meaning less height loss from sliding down the slope), but also with a steeper angle which is more favorable for the wall kick chain itself. So once she optimized the GWK, I finished out the wall kick chain and collected the star at the end of the level using the same strat of a tight dive recover followed by a tight long jump. Unfortunately it doesnt look like theres any chance of reducing this count by anything further, not without finding a hyperspeed strat that could take it straight to 1xA. SMSR: Bowsers Slippery Swamp Replica 9xA [TAS]](https://i.ytimg.com/vi/zRlGMfqjML8/mqdefault.jpg)