Uploaded April 2023 | Updated November 2026, 3 hours ago
RIchard came over to help again which enabled a lot of progress on the studio. The walls are now sheathed and wrapped. The resulting structure is now extremely stiff and the loft feels completely solid now, just like the main floor.
Still no gable framing, but some fine tuning of the rafter bird's mouth cuts and templates are now complete for all the common rafters. The barge/flying rafter won't have the bird's mouth, just the notch for the ridge beam.
Did a bit of earth moving at the north side to flatten the ground there and make it safer to use the ladder. Also did a general clean-up of all the small scrap, etc to remove trip hazards in that area also.
Gonna have to make some scaffolding for the cathedral end work.
RIchard came over to help again which enabled a lot of progress on the studio. The walls are now sheathed and wrapped. The resulting structure is now extremely stiff and the loft feels completely solid now, just like the main floor.
Still no gable framing, but some fine tuning of the rafter bird's mouth cuts and templates are now complete for all the common rafters. The barge/flying rafter won't have the bird's mouth, just the notch for the ridge beam.
Did a bit of earth moving at the north side to flatten the ground there and make it safer to use the ladder. Also did a general clean-up of all the small scrap, etc to remove trip hazards in that area also.
Gonna have to make some scaffolding for the cathedral end work.










