Uploaded December 2011 | Updated November 2026, 9 hours ago
The other day when I did the video where I used a "Heat Intensifier" on a used Sterno can that I refilled with perlite and alcohol. At the time I commented that I wondered what would happen to the "time to boil" if I raised the can closer to the bottom of the pot instead of using the Heat Intensifier. So in this video I do just that.
So I raised the can up about a half inch which put the distance between the can and the pot about one inch. I was surprised that the time to boil was about the same. Hmmm.
Thank you for watching my video,
Hiram
Lab0223
Title: Sterno can refill with Perlite and alcohol - Boil Test 2
Room temp: 63°
Humidity: 71%
Weather condition: Raining
Burner: Sterno - small can - refilled with Perlite and alcohol
Stove/Pot stand: Sterno Speed Cook Stove
Pot: Boy Scout Pot #2 - Aluminum
Fuel: methanol
Amount of fuel: 2 fluid ounces
Amount of water: 2 cup(s)
Water temp at start: 60°
Time to boil: 10 minute(s) 20 second(s)
Time to run-out: NA
Note: Previous test at full pot stand height - 10 minute(s) 16 second(s)
NA = Not Applicable / Not Available
The other day when I did the video where I used a "Heat Intensifier" on a used Sterno can that I refilled with perlite and alcohol. At the time I commented that I wondered what would happen to the "time to boil" if I raised the can closer to the bottom of the pot instead of using the Heat Intensifier. So in this video I do just that.
So I raised the can up about a half inch which put the distance between the can and the pot about one inch. I was surprised that the time to boil was about the same. Hmmm.
Thank you for watching my video,
Hiram
Lab0223
Title: Sterno can refill with Perlite and alcohol - Boil Test 2
Room temp: 63°
Humidity: 71%
Weather condition: Raining
Burner: Sterno - small can - refilled with Perlite and alcohol
Stove/Pot stand: Sterno Speed Cook Stove
Pot: Boy Scout Pot #2 - Aluminum
Fuel: methanol
Amount of fuel: 2 fluid ounces
Amount of water: 2 cup(s)
Water temp at start: 60°
Time to boil: 10 minute(s) 20 second(s)
Time to run-out: NA
Note: Previous test at full pot stand height - 10 minute(s) 16 second(s)
NA = Not Applicable / Not Available










