Uploaded January 2012 | Updated November 2026, 9 hours ago
In this video I do a test to find out if a clean pot heats better than a blackened pot. This is something I wondered about since I was a tenderfoot in the Boy Scouts and now I have a chance to find out.
The other day I did a lab where I used the Firebox I got from Steve over at Firebox Industries. The fuel I was using at the time was wood pellets and it coated the GSI cup I was using with a real hard, black soot. Since I have another clean GSI cup I thought this would be a good time to check it out.
In this lab I'm using a fondue burner in the Folding Firebox stove. I must have been having a brain fart since I didn't mention the name of the stove at the start of the video. Sorry Steve. If you'ld like more info on the Firebox use the link below.
Also sorry about the slanted video. The camera was tilted a bit and I didn't notice it.
Link to my video, Snowtober - 10/29/2011
youtube.com/watch?v=McJdsp1SCQU
You can find more info on the Firebox at the following link:
foldingfirebox.com
Thank you for watching my video,
Hiram
Lab0233
Title: Clean pot vs Blackened pot - Part 1
Room temp: 49° - Note: the 42 I said was the humidity level, not the temperature
Humidity: 42%
Weather condition: Cloudy - Windy
Burner: Fondue burner - alcohol
Stove/Pot stand: Firebox Pot Stand setup for using the Fondue burner.
Pot: GSI Cup
Fuel: methanol
Amount of fuel: NA
Amount of water: 2 cup(s)
Water temp at start: 49°
Time to boil: 11 minute(s) 46 second(s)
Time to run-out: NA
Note:
NA = Not Applicable / Not Available
Title: Clean pot vs Blackened pot - Part 2
Room temp: 49° - Note: the 42 I said was the humidity level, not the temperature
Humidity: 42%
Weather condition: Cloudy - Windy
Burner: Fondue burner - alcohol
Stove/Pot stand: Firebox Pot Stand setup for using the Fondue burner.
Pot: GSI Cup
Fuel: methanol
Amount of fuel: NA
Amount of water: 2 cup(s)
Water temp at start: 50°
Time to boil: 11 minute(s) 50 second(s), Give-or-take
Time to run-out: NA
Note:
NA = Not Applicable / Not Available
In this video I do a test to find out if a clean pot heats better than a blackened pot. This is something I wondered about since I was a tenderfoot in the Boy Scouts and now I have a chance to find out.
The other day I did a lab where I used the Firebox I got from Steve over at Firebox Industries. The fuel I was using at the time was wood pellets and it coated the GSI cup I was using with a real hard, black soot. Since I have another clean GSI cup I thought this would be a good time to check it out.
In this lab I'm using a fondue burner in the Folding Firebox stove. I must have been having a brain fart since I didn't mention the name of the stove at the start of the video. Sorry Steve. If you'ld like more info on the Firebox use the link below.
Also sorry about the slanted video. The camera was tilted a bit and I didn't notice it.
Link to my video, Snowtober - 10/29/2011
youtube.com/watch?v=McJdsp1SCQU
You can find more info on the Firebox at the following link:
foldingfirebox.com
Thank you for watching my video,
Hiram
Lab0233
Title: Clean pot vs Blackened pot - Part 1
Room temp: 49° - Note: the 42 I said was the humidity level, not the temperature
Humidity: 42%
Weather condition: Cloudy - Windy
Burner: Fondue burner - alcohol
Stove/Pot stand: Firebox Pot Stand setup for using the Fondue burner.
Pot: GSI Cup
Fuel: methanol
Amount of fuel: NA
Amount of water: 2 cup(s)
Water temp at start: 49°
Time to boil: 11 minute(s) 46 second(s)
Time to run-out: NA
Note:
NA = Not Applicable / Not Available
Title: Clean pot vs Blackened pot - Part 2
Room temp: 49° - Note: the 42 I said was the humidity level, not the temperature
Humidity: 42%
Weather condition: Cloudy - Windy
Burner: Fondue burner - alcohol
Stove/Pot stand: Firebox Pot Stand setup for using the Fondue burner.
Pot: GSI Cup
Fuel: methanol
Amount of fuel: NA
Amount of water: 2 cup(s)
Water temp at start: 50°
Time to boil: 11 minute(s) 50 second(s), Give-or-take
Time to run-out: NA
Note:
NA = Not Applicable / Not Available










