Uploaded December 2024 | Updated November 2026, 3 hours ago
S&S by Avalon Harmonics: a 3 HP Eurorack sample & hold with a built-in random source, slew limiter, and white noise output. In this video I build it from a PCB kit and then use it in a jam. [Your own impression of the build and the sound.]
What it does: samples an incoming CV (about -4.5V to +10V, clipped outside that range) or its internal random source (usually around Β±2.5V), can run at audio rates as a sample-crusher effect, and can slew the held value for smooth random modulation. Note that the held value slowly sags over time, so it suits shorter notes when sampling 1V/oct.
3 HP | 48 mm (check your build) | 21 mA at +12V / 19 mA at -12V
π More info: avalon-harmonics.com/module/SnS
BOM & source: github.com/Thorinair/Avalon-Harmonics/tree/master/Modules/S%26S
Thanks to Avalon Harmonics (Thorinair) for sending me this module.
π Patch notes:
LFO1 β S&S trigger in
LFO2 β ENV gate in
OSC out β FILTER in
ENV out β VCA CV in
S&S output β FILTER cutoff
FILTER out β VCA in
VCA out β MIXER in
ποΈ Chapters:
0:00 Intro
0:32 Assembly (PCB Build)
1:35 Jam
βοΈ Iβm Sid Rockett, a designer and explorer of experimental synthesizers and custom noise-machines.
From boutique pocket synths to DIY Eurorack builds, this channel is dedicated to pushing the boundaries of compact hardware. Join me as we navigate through industrial soundscapes, deep cinematic reverbs, and the infinite feedback of outer-space delays.
π Subscribe for more experimental audio hardware, mini synths, and sound design: youtube.com/@SidRockett
ποΈ Shop here:
sidrockett.bandcamp.com
tindie.com/stores/sid_rockett
π Follow Sid Rockett here:
tiktok.com/@sidrockett
instagram.com/sidrockett
#Eurorack #SampleAndHold #DIYSynth #AvalonHarmonics #ModularSynth
S&S by Avalon Harmonics: a 3 HP Eurorack sample & hold with a built-in random source, slew limiter, and white noise output. In this video I build it from a PCB kit and then use it in a jam. [Your own impression of the build and the sound.]
What it does: samples an incoming CV (about -4.5V to +10V, clipped outside that range) or its internal random source (usually around Β±2.5V), can run at audio rates as a sample-crusher effect, and can slew the held value for smooth random modulation. Note that the held value slowly sags over time, so it suits shorter notes when sampling 1V/oct.
3 HP | 48 mm (check your build) | 21 mA at +12V / 19 mA at -12V
π More info: avalon-harmonics.com/module/SnS
BOM & source: github.com/Thorinair/Avalon-Harmonics/tree/master/Modules/S%26S
Thanks to Avalon Harmonics (Thorinair) for sending me this module.
π Patch notes:
LFO1 β S&S trigger in
LFO2 β ENV gate in
OSC out β FILTER in
ENV out β VCA CV in
S&S output β FILTER cutoff
FILTER out β VCA in
VCA out β MIXER in
ποΈ Chapters:
0:00 Intro
0:32 Assembly (PCB Build)
1:35 Jam
βοΈ Iβm Sid Rockett, a designer and explorer of experimental synthesizers and custom noise-machines.
From boutique pocket synths to DIY Eurorack builds, this channel is dedicated to pushing the boundaries of compact hardware. Join me as we navigate through industrial soundscapes, deep cinematic reverbs, and the infinite feedback of outer-space delays.
π Subscribe for more experimental audio hardware, mini synths, and sound design: youtube.com/@SidRockett
ποΈ Shop here:
sidrockett.bandcamp.com
tindie.com/stores/sid_rockett
π Follow Sid Rockett here:
tiktok.com/@sidrockett
instagram.com/sidrockett
#Eurorack #SampleAndHold #DIYSynth #AvalonHarmonics #ModularSynth










