S-Parameters #5. Lossless & Reciprocal Networks Explained | Input Return Loss, S11 & Matching Basics @technologiesdiscussion1676
S-Parameters #5. Lossless & Reciprocal Networks Explained | Input Return Loss, S11 & Matching Basics  @technologiesdiscussion1676
Uploaded June 2025 | Updated November 2026, 1 day ago
S-Parameters playlist.
youtube.com/watch?v=_p0efFhCt6I&list=PLFxhgwM1F4yyAu86pAYE5KTppq0xZ8NFr

For access to this presentation materials, membership is required: I need the Material PPT
Sent me an email to Technologies.Discussion@gmail.com
If you need the whole playlist material, send me email and we discuss.
Give me some time to response. Thanks.

A two-port network is known to have the following scattering matrix:

Determine if the network is reciprocal and lossless. If port 2 is terminated with a matched load, what is the return loss seen at port 1? If port 2 is terminated with a short circuit, what is the return loss seen at port 1?

ANS (Reciprocal)
A network is reciprocal if it is passive and contains only reciprocal materials that influence the transmitted signal. For example, attenuators, cables, splitters and combiners are all reciprocal networks, where Smn = Snm in each case, meaning the S-parameter matrix is equal to its transpose.
[S] is not symmetric, the network is not reciprocal.

A lossless network is one that does not dissipate any power. Mathematically, this is expressed as:
This means that the sum of the incident powers at all ports is equal to the sum of the outgoing (e.g., reflected) powers at all ports. This implies that the S-parameter matrix is unitary, which can be expressed as:
(S)H (S) = (I)
where (S)H is the conjugate transpose of (S) and (I) is the identity matrix.
S-Parameters #5. Lossless & Reciprocal Networks Explained | Input Return Loss, S11 & Matching BasicsFilter Design #17. How to Design from Lumped Elements LC to Distributed Microstrip Lowpass Filter.Circuit Theory: Cable (Perfect Short Circuit). Transmission Line Theory: Impedance Vary with Length.EMC #28. Shielding Design: Near Field, Low Freq (E- & H-field) & Far Field, High Freq (Plane Wave)Types of Constellation Diagram Errors: IQ Imbalance, Quadrature Error & I/Q Offset / Carrier LeakageAntenna #20. Complete Friis Transmission Equation Tutorial. Derivation + Receiver Power (Pr) ExampleS/N Ratio #1. Understand Why Signal-to-Noise Ratio SNR is Critical for Wireless Communication SystemMicrowave #3. Why Wires Radiate at High Freq? Skin Effect: Current Flows on Surface, Not the Center.Three Types of Radio Wave Propagation: 1) Ground Wave, 2) Sky Wave & 3) Space Wave.Working Example: Convert (Ratio to dB / dBm) & (dB / dBm to Ratio)EMC Testing Made Easy: Radiated Emissions (RE) Test Procedure Explained Step-by-Step for ComplianceDigital Modulation #7. Types of Constellation Diagram Errors: Quadrature, IQ Imbalance & IQ Offset.
Technologies Discussion |

S-Parameters #5. Lossless & Reciprocal Networks Explained | Input Return Loss, S11 & Matching Basics

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER