S/N Ratio #1. Understand Why Signal-to-Noise Ratio SNR is Critical for Wireless Communication System @technologiesdiscussion1676
S/N Ratio #1. Understand Why Signal-to-Noise Ratio SNR is Critical for Wireless Communication System  @technologiesdiscussion1676
Uploaded April 2025 | Updated November 2026, 1 day ago
S/N Ratio or SNR playlist.
youtube.com/watch?v=aeTK1OiKNnc&list=PLFxhgwM1F4yyuT4rqOrm82nRMMBuTsHPJ

For access to this presentation materials, membership is required: I need the Material PPT
Sent me an email to Technologies.Discussion@gmail.com
If you need the whole playlist material, send me email and we discuss.
Give me some time to response. Thanks.

How Signal-to-Noise Ratio Ensures Reliable Communication (Why Higher SNR is Better).
Effect of Signal-to-Noise Ratio in Communication: Higher SNR = Better Signal Quality!
S/N Ratio #1. Why Higher Signal-to-Noise Ratio (SNR) Means Better Communication Signal Quality.

Signal-to-noise ratio (SNR) is a measure of the strength of a desired signal relative to the level of background noise, often expressed in decibels (dB). A higher SNR indicates a clearer signal with less interference from noise. In essence, it quantifies how much of the desired signal is present compared to unwanted noise.

Signal:
This refers to the desired information or data being transmitted or processed. 

Noise:
This encompasses any unwanted or interfering signals that can degrade the quality of the desired signal. 

SNR Measurement:
The SNR is typically calculated as the ratio of the signal power to the noise power. 

In the previous comparison, you can better understand what is meant by an unwanted signal or noise. As you might imagine, it would be nearly impossible to listen to the other party in your conversation under such conditions. In this scenario, we would consider signal-to-noise ratio (SNR) falls below acceptable parameters.

Now, suppose the desired signal contains essential data with strict error tolerance. In this case, the receiver’s task of deciphering the desired signal becomes exponentially more challenging. In summary, this is why maintaining a high signal-to-noise ratio is so critical.

Furthermore, in some cases, this can determine whether a device functions at all, and in all cases, it impacts performance between the transmitter and receiver.

If your device's radio receives a signal at -65dBm and the noise floor is
-80dBm, the resulting signal-to-noise ratio (SNR) is 15dB. This means the wireless connection has a signal strength of 15dB SNR.

Different types of connections require different minimum SNR values. For example, if a connection requires 20dB SNR, there would be a difference between the actual SNR (15 dB) and the required SNR (20 dB).

Below 5 to 10 dB: Insufficient to establish a connection, as the noise level is nearly indistinguishable from the desired signal (useful information).
10 to 15 dB: The minimum threshold for an unreliable connection.
15 to 25 dB: Considered the minimally acceptable level for poor connectivity.
25 to 40 dB: Rated as good.
41 dB or higher: Classified as excellent.

For example, a Wi-Fi signal with an S/N ratio of 40 dB will deliver better network performance than one with 20 dB. If the S/N ratio is too low, network performance may degrade because devices struggle to distinguish the desired signal from background noise. This can lead to packet loss, data retransmissions, reduced throughput, and increased latency.

Noise refers to any unwanted interference that disrupts the signal quality. It can come from various sources, including 1) thermal, 2) quantum, 3) electronic, 4) impulse, and 5) intermodulation noise, among others. Environmental factors such as temperature and humidity can also influence noise levels.

SNR is a relative measure of the ratio of the desired signal power, S, to the noise power, N.

For a good communication system, we desire that the SNR to be as high as possible. If the SNR is very high, then we can distinguish the signal very easily from the noise. A low SNR would mean that the noise power is comparable to the signal power and would mean that it is very noisy and difficult to obtain the signal.
Since SNR is a large number, it is often expressed in dB.

If the voice signal is weak, the noise will be a serious problem as the SNR will be low and we will have difficulty to retrieve back the original signal
S/N Ratio #1. Understand Why Signal-to-Noise Ratio SNR is Critical for Wireless Communication SystemMicrowave #3. Why Wires Radiate at High Freq? Skin Effect: Current Flows on Surface, Not the Center.Three Types of Radio Wave Propagation: 1) Ground Wave, 2) Sky Wave & 3) Space Wave.Working Example: Convert (Ratio to dB / dBm) & (dB / dBm to Ratio)EMC Testing Made Easy: Radiated Emissions (RE) Test Procedure Explained Step-by-Step for ComplianceDigital Modulation #7. Types of Constellation Diagram Errors: Quadrature, IQ Imbalance & IQ Offset.Analog to Digital Conversion (ADC) Explained: Sampling, Quantization & Encoding Process SimplifiedImpedance Matching #2. Why Max Power Transfer Requires Load Complex Conjugate Matching of SourceElectrical Principles #6. Using Ohms Law to Obtain the Total Resistor of Series & Parallel ResistorImpedance Matching #3. How to Design L-Section Matching Using Series & Shunt Inductor or CapacitorWhy RF Mixer is Critical: Smaller Antenna, Shared Spectrum, Single-Freq Amplifiers & Easier Q DesignAI #1. Master AI Components: Learning, Reasoning, Problem-Solving, Perception & Language Understand.
Technologies Discussion |

S/N Ratio #1. Understand Why Signal-to-Noise Ratio SNR is Critical for Wireless Communication System

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER