Uploaded November 2025 | Updated September 2026, 1 week ago
Trying to tune a quality 200% cube. Some strangeness in the corners with more heat, it seems the higher flow of the longer sections is colder than the corners. Temp needs to be higher!
This is my typical print speed and acceleration. Somewhat a base speed for normal prints.
39 minute print, Voron Cube 200% size.
ABS. 270C, 800mms commanded external and internal perimeters, top 400mms, 400mms overhangs, 30K acceleration, 20SCV, .018PA, .02ST, fan speed 10%.
Trying to tune a quality 200% cube. Some strangeness in the corners with more heat, it seems the higher flow of the longer sections is colder than the corners. Temp needs to be higher!
This is my typical print speed and acceleration. Somewhat a base speed for normal prints.
39 minute print, Voron Cube 200% size.
ABS. 270C, 800mms commanded external and internal perimeters, top 400mms, 400mms overhangs, 30K acceleration, 20SCV, .018PA, .02ST, fan speed 10%.
