Smart PID fan control with AWS IoT on PIC32CM JH-VL Curiosity Nano+ Touch Evaluation Kit @MicrochipDeveloperHelp
Smart PID fan control with AWS IoT on PIC32CM JH-VL Curiosity Nano+ Touch Evaluation Kit  @MicrochipDeveloperHelp
Uploaded October 2025 | Updated November 2026, 5 days ago
This application demonstrates the automatic control of a fan/motor using the PIC32CM JH Value Line Curiosity Nano+ Touch Evaluation Kit, RNWF02 Wi-Fi module, Temp&Hum 13 Click, and a motor driver, where real-time temperature data is published to Amazon AWS. The motor speed is regulated through PWM signals from the Timer/Counter module. With a PID algorithm ensuring smooth, stable, and efficient control. The system supports two modes: in Automatic mode, the fan speed adjusts dynamically with temperature changes, while in Manual mode, users can set predefined speeds (LOW, MEDIUM, HIGH) via AWS payloads. This makes the solution ideal for smart environments, offering both autonomous operation and cloud-based manual control.

Links:
· PIC32CM JH VL Curiosity Nano+ Touch Evaluation Kit
microchip.com/en-us/development-tool/ev16b95a

· Curiosity Nano base for Click Boards
microchip.com/en-us/development-tool/ac164162

· Mikroe Temp&Hum 13 Click
mikroe.com/temphum-13-click?srsltid=AfmBOoog9DVaSrXB66Yyz1sGI2i7B3OxY6oKqW7ksAXkcB3_R0HgkXr8

· RNWF02 Add-on Board
microchip.com/en-us/development-tool/ev72e72a

· Dual Channel DC Motor Driver MDD3A
cytron.io/p-3amp-4v-16v-dc-motor-driver-2-channels

· Demo User Guide:
onlinedocs.microchip.com/oxy/GUID-92B89873-2CDA-4404-B3B9-9496F37EA604-en-US-2/GUID-80EA5952-4373-4631-98BB-D9517E0F290F.html

· Demo- Smart PID fan control with AWS IoT on PIC32CM JH VL Curiosity Nano+ Touch Evaluation Kit
github.com/Microchip-MPLAB-Harmony/reference_apps/releases/latest/download/pic32cm_jh_vl_cnano_smart_pid.zip

· Reference Apps repository for PIC32CM MCUs
github.com/Microchip-MPLAB-Harmony/reference_apps_pic32cm

· 32-Bit Microcontrollers Product Page
microchip.com/en-us/products/microcontrollers/32-bit-mcus

· How to Set up the Tools Required to Get Started with MPLAB® Harmony v3 and MCC
youtube.com/watch?v=0rNFSlsVwVw&t=1s

Timestamps:
0:00 – Introduction
0:25 – Application Overview
0:37 – Prerequisite - Hardware
1:21 – Prerequisite – Software
2:47 – Project Scope and Steps
3:00 – Step 1: Setup the Hardware
3:53 – Step 2: Download the project from the kit page
4:05 – Step 3: Open the project and launch MCC
4:09 – Step 4: Check the peripheral configurations in MCC
5:52 – Step 5: Compile the project and see the Output
8:40 – More application demos on PIC32CM JH VL MCUs
8:48 – More information on MPLAB Harmony
Smart PID fan control with AWS IoT on PIC32CM JH-VL Curiosity Nano+ Touch Evaluation KitDev Tool Bits | Discover Resources with MPLAB® DiscoverBare Metal Programming in VS Code – Basic Bare-Metal ApplicationDiagnostic of SmartDebug utility for DDR interfacesMicrochip CMSIS Solution – Installation, Creating a CMSIS VS Code® Profile & Blinking a LEDPhase NoiseSAMA5D2 Secure Boot (Part 2): Generating and Writing Customer Keys Using Secure SAM-BA® Cipher ToolProvisioning a SAMA7D65 MPU to Boot from NAND Using the SAM-BA®In-System Programmer (ISP)Getting Started with Graphics on SAM9X60 Curiosity Development BoardMPLAB® Harmony in VS Code®: Importing and Upgrading MPLAB® Discover ProjectsSecure Gateway Architecture for 10BASE-T1S Client Networks With AWS® CloudIntro to Bare Metal Programming - Episode 14: Final Project - Part 1
Microchip Developer Help |

Smart PID fan control with AWS IoT on PIC32CM JH-VL Curiosity Nano+ Touch Evaluation Kit

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER