Provisioning a SAMA7D65 MPU to Boot from NAND Using the SAM-BA®In-System Programmer (ISP) @MicrochipDeveloperHelp
Provisioning a SAMA7D65 MPU to Boot from NAND Using the SAM-BA®In-System Programmer (ISP)  @MicrochipDeveloperHelp
Uploaded June 2025 | Updated November 2026, 17 hours ago
CONTENT:

0:05 - Provide a brief overview of the key features and applications of the SAMA7D65
0:53 - Setup the SAM-BA IN-SYSTEM Programmer
1:05 - Hardware Setup
1:30 - Configure the Serial Console
1:46 - Main purpose of ROM Code
2:15 - Boot Strategies
2:32 - NVM Boot Sequence
3:07 - Default Boot Configuration
3:10 - Boot Configuration Packet (BCP)
3:37 - Boot Sequence Controller Configuration Register (BSC_CR)
4:14 - SAM-BA Software: How to Connect to the Device
4:48 - SAM-BA Software: How to Enable Emulation
5:10 - SAM-BA Software: Write the Boot configuration packet to the emulation secure RAM
5:30 - SAM-BA Software: How to Choose NAND Flash IOSET
5:44 - SAM-BA Software: How to Choose Flexcom IOSET
5:48 - SAM-BA Software: Read and Verify BCP-EMUL
5:52 - SAM-BA Software: How to Write BCP to OTP
6:01 - Write Boot and Application Binaries to NAND Flash
6:11 - NAND PMECC Calculation
7:08 - SAM-BA Software: Syntax for the NAND Flash Initialization
7:38 - SAM-BA Software: Write Bare Metal Application to NAND Flash
8:40 - SAM-BA Software: Write Linux Application to NAND Flash

This video explains how to use the SAM-BA® In-System Programmer (ISP) and the SAMA7D65 Curiosity Development Board to provision the SAMA7D65 microprocessor (MPU) to boot from NAND. This step-by-step guide demonstrates how to provision the SAMA7D65 device via the USB, serial or J-Link interface and how to flash the boot and application binaries to NAND Flash using the SAM-BA ISP.

Reference Links:
- SAMA7D65 Curiosity Development Board: microchip.com/en-us/development-tool/EV63J76A
- SAM-BA In-System Programmer (ISP): microchip.com/en-us/development-tool/SAM-BA-In-system-Programmer
- Configure and Build at91bootstrap to Load an MPLAB® Harmony v3 Application from NAND: developerhelp.microchip.com/xwiki/bin/view/software-tools/32-bit-harmony-v3/sama7d65-curiosity-build-at91bootstrap-nand
- Writing an MPLAB Harmony v3 Application and at91bootstrap to NAND Flash Memory Using the SAM-BA ISP: developerhelp.microchip.com/xwiki/bin/view/software-tools/32-bit-harmony-v3/sama7d65-curiosity-write-nand
- SAMA7D65 Curiosity Board: Quick Start Guide for MPLAB Harmony v3: developerhelp.microchip.com/xwiki/bin/view/software-tools/mcu-dev-boards/32-bit-kits/sama7d65-curiosity/get-started-harmony
- Getting Started with Linux OS on SAMA7D65 MPU: developerhelp.microchip.com/xwiki/bin/view/applications/linux4sam/Boards/sama7d65curosity
- Macronix 4 Gbit SLC NAND Flash Data Sheet: macronix.com/Lists/Datasheet/Attachments/8863/MX30LF2G28AD,%203V,%202Gb,%20v1.3.pdf
Provisioning a SAMA7D65 MPU to Boot from NAND Using the SAM-BA®In-System Programmer (ISP)MPLAB® Harmony in VS Code®: Importing and Upgrading MPLAB® Discover ProjectsSecure Gateway Architecture for 10BASE-T1S Client Networks With AWS® CloudIntro to Bare Metal Programming - Episode 14: Final Project - Part 1Linux® Ultra-Fast BootSchematic Design Entry using SmartDesign in Libero® SoCImplementing Multizone Security In RISC-V ApplicationsMCC Melody in VS Code®: I2C Proximity Ex.1 - Polled + PrintfDev Tool Bits| Full Walkthrough and Setup of MPLAB® Tools for VS Code® #embeddedsystems #vscodePower Estimation for PolarFire® FPGAsChoosing the Right Op Amp for a Voltage Follower – What REALLY Matters!Demonstrating AWS IoT Core Application with SAM IoT Wx v2 Development Board
Microchip Developer Help |

Provisioning a SAMA7D65 MPU to Boot from NAND Using the SAM-BA®In-System Programmer (ISP)

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER