![Simple Plastic Steel Legion - Cadian Head Swaps [How I Paint Things] @SonicSledgehammerStudio](https://i.ytimg.com/vi/YBQvcezm1ik/maxresdefault.jpg)
Uploaded June 2025 | Updated September 2026, 1 week ago
I've mentioned in previous videos that the new Cadian plastics work remarkably well as generic troops - the fact they're carrying plenty of equipment gives them a slightly more 'prepared' look than the previous miniatures did, which can fit in with dozens of potential colour schemes and background ideas for your regiments with just a head swap or two. While we'll likely never see Steel Legion truly in plastic, that doesn't mean we can't use what we've got access to these days!
Find the heads at https://tinylegend.eu/ - search for 'Dust' and you'll find all the different head choices for the Steel Legion-inspired helmets. The M-38A helmets are more like those worn by the original Steel Legion, while the M-35A look more like Stahlhelm. There's also 'flexible hoses for single valve masks' in the Gas Mask Equipment set, which would likely fit well if you wanted to swap the pack rolls on the plastic Cadians for gas mask filters as well.
Check out The Army Painter Academy guide mentioned here: thearmypainter.com/en-de/blogs/explore/the-army-painter-academy-the-steel-legion
00:00 - Intro
00:58 - Miniature Notes
01:47 - Basecoats
09:58 - Shading
11:18 - Highlights & Finishing Touches
14:16 - The Finished Miniature
Thanks to Producer Patrons Alan, Kyrie, Andrew, Jimmy, Rod, Phil, Ben, Robison, David Kinney, Fred, Fool in a Hat, and Chris - as well as all the other Patrons that made this video possible, and Exit23 Games for recording equipment that helps keep the channel ticking over! Find out more at the following links:
patreon.com/sonicsledgehammer
https://bsky.app/profile/sonicsledgehammer.bsky.social
instagram.com/sonicsledgehammer
ko-fi.com/sonicsledge
http://exit23.games
PAINTS USED:
PRIMERS: Skeleton Bone (Army Painter Spray)
ARMY PAINTER:
Agate Skin (Fanatic)
Deep Grey (Fanatic)
Wasteland Clay (Fanatic)
Oak Brown (Fanatic)
Leather Brown (Fanatic)
Ancient Stone (Fanatic)
Gun Metal (Fanatic)
Gothic Blue (Fanatic)
Strap Grey (Fanatic - Historical)
Matt Black (Fanatic)
Matt White (Fanatic)
Strong Tone (Wash)
Speedpaint Medium
Barbarian Flesh (Fanatic)
Dorado Skin (Fanatic)
Plate Mail Metal (Fanatic)
Alpha Blue (Fanatic)
THE BASE: Apply a thick layer of Vallejo Brown Earth texture paste, then heavily drybrush with Barren Dune (AP Fanatic), then lightly with Ancient Stone (AP Fanatic). These tufts are Highland Tufts from The Army Painter.
I've mentioned in previous videos that the new Cadian plastics work remarkably well as generic troops - the fact they're carrying plenty of equipment gives them a slightly more 'prepared' look than the previous miniatures did, which can fit in with dozens of potential colour schemes and background ideas for your regiments with just a head swap or two. While we'll likely never see Steel Legion truly in plastic, that doesn't mean we can't use what we've got access to these days!
Find the heads at https://tinylegend.eu/ - search for 'Dust' and you'll find all the different head choices for the Steel Legion-inspired helmets. The M-38A helmets are more like those worn by the original Steel Legion, while the M-35A look more like Stahlhelm. There's also 'flexible hoses for single valve masks' in the Gas Mask Equipment set, which would likely fit well if you wanted to swap the pack rolls on the plastic Cadians for gas mask filters as well.
Check out The Army Painter Academy guide mentioned here: thearmypainter.com/en-de/blogs/explore/the-army-painter-academy-the-steel-legion
00:00 - Intro
00:58 - Miniature Notes
01:47 - Basecoats
09:58 - Shading
11:18 - Highlights & Finishing Touches
14:16 - The Finished Miniature
Thanks to Producer Patrons Alan, Kyrie, Andrew, Jimmy, Rod, Phil, Ben, Robison, David Kinney, Fred, Fool in a Hat, and Chris - as well as all the other Patrons that made this video possible, and Exit23 Games for recording equipment that helps keep the channel ticking over! Find out more at the following links:
patreon.com/sonicsledgehammer
https://bsky.app/profile/sonicsledgehammer.bsky.social
instagram.com/sonicsledgehammer
ko-fi.com/sonicsledge
http://exit23.games
PAINTS USED:
PRIMERS: Skeleton Bone (Army Painter Spray)
ARMY PAINTER:
Agate Skin (Fanatic)
Deep Grey (Fanatic)
Wasteland Clay (Fanatic)
Oak Brown (Fanatic)
Leather Brown (Fanatic)
Ancient Stone (Fanatic)
Gun Metal (Fanatic)
Gothic Blue (Fanatic)
Strap Grey (Fanatic - Historical)
Matt Black (Fanatic)
Matt White (Fanatic)
Strong Tone (Wash)
Speedpaint Medium
Barbarian Flesh (Fanatic)
Dorado Skin (Fanatic)
Plate Mail Metal (Fanatic)
Alpha Blue (Fanatic)
THE BASE: Apply a thick layer of Vallejo Brown Earth texture paste, then heavily drybrush with Barren Dune (AP Fanatic), then lightly with Ancient Stone (AP Fanatic). These tufts are Highland Tufts from The Army Painter.
![Simple Plastic Steel Legion - Cadian Head Swaps [How I Paint Things]](https://i.ytimg.com/vi/YBQvcezm1ik/mqdefault.jpg "Simple Plastic Steel Legion - Cadian Head Swaps [How I Paint Things]
Ive mentioned in previous videos that the new Cadian plastics work remarkably well as generic troops - the fact theyre carrying plenty of equipment gives them a slightly more prepared look than the previous miniatures did, which can fit in with dozens of potential colour schemes and background ideas for your regiments with just a head swap or two. While well likely never see Steel Legion truly in plastic, that doesnt mean we cant use what weve got access to these days!
Find the heads at https://tinylegend.eu/ - search for Dust and youll find all the different head choices for the Steel Legion-inspired helmets. The M-38A helmets are more like those worn by the original Steel Legion, while the M-35A look more like Stahlhelm. Theres also flexible hoses for single valve masks in the Gas Mask Equipment set, which would likely fit well if you wanted to swap the pack rolls on the plastic Cadians for gas mask filters as well.
Check out The Army Painter Academy guide mentioned here: https://thearmypainter.com/en-de/blogs/explore/the-army-painter-academy-the-steel-legion
00:00 - Intro
00:58 - Miniature Notes
01:47 - Basecoats
09:58 - Shading
11:18 - Highlights & Finishing Touches
14:16 - The Finished Miniature
Thanks to Producer Patrons Alan, Kyrie, Andrew, Jimmy, Rod, Phil, Ben, Robison, David Kinney, Fred, Fool in a Hat, and Chris - as well as all the other Patrons that made this video possible, and Exit23 Games for recording equipment that helps keep the channel ticking over! Find out more at the following links:
https://www.patreon.com/sonicsledgehammer
https://bsky.app/profile/sonicsledgehammer.bsky.social
https://www.instagram.com/sonicsledgehammer/
https://ko-fi.com/sonicsledge
http://exit23.games
PAINTS USED:
PRIMERS: Skeleton Bone (Army Painter Spray)
ARMY PAINTER:
Agate Skin (Fanatic)
Deep Grey (Fanatic)
Wasteland Clay (Fanatic)
Oak Brown (Fanatic)
Leather Brown (Fanatic)
Ancient Stone (Fanatic)
Gun Metal (Fanatic)
Gothic Blue (Fanatic)
Strap Grey (Fanatic - Historical)
Matt Black (Fanatic)
Matt White (Fanatic)
Strong Tone (Wash)
Speedpaint Medium
Barbarian Flesh (Fanatic)
Dorado Skin (Fanatic)
Plate Mail Metal (Fanatic)
Alpha Blue (Fanatic)
THE BASE: Apply a thick layer of Vallejo Brown Earth texture paste, then heavily drybrush with Barren Dune (AP Fanatic), then lightly with Ancient Stone (AP Fanatic). These tufts are Highland Tufts from The Army Painter.")
![Simple Methods, Easy Results - Painting Krieg 158th Siege Regiment [How I Paint Things]](https://i.ytimg.com/vi/YREc2toy230/mqdefault.jpg "Simple Methods, Easy Results - Painting Krieg 158th Siege Regiment [How I Paint Things]
The 158th Siege Regiment have come up in requests a few times over the years, so at last its time to tackle one of the iconic classic colour schemes that dates back to the Siege of Vraks book!
Check out https://tinylegend.eu/ for alternative heads and other interesting bits for your Krieg miniatures, either as STLs or printed resin add-ons.
Theres a few other guides on the channel that might prove useful if youre looking to paint your Krieg infantry:
https://youtu.be/Yek5mnfsTEg
https://youtu.be/CjFxrXDHMY8
https://youtu.be/V-jz9zVrgyE
https://youtu.be/Gavh_y-0RSM
https://youtu.be/kMUj1h7zGpE
00:00 - Intro
00:57 - Quick Miniature & Priming Notes
02:07 - Basecoats
09:42 - Shading
10:58 - Highlights & Finishing Touches
13:26 - The Finished Miniature
Thanks to Producer Patrons Alan, Kyrie, Andrew, Jimmy, Rod, Phil, Ben, Robison, David Kinney, Fred, and Matt Dischner - as well as all the other Patrons that made this video possible, and Exit23 Games for recording equipment that helps keep the channel ticking over! Find out more at the following links:
https://www.patreon.com/sonicsledgehammer
https://bsky.app/profile/sonicsledgehammer.bsky.social
https://www.instagram.com/sonicsledgehammer/
https://ko-fi.com/sonicsledge
http://exit23.games
PAINTS USED:
PRIMERS: Death Guard Green (Citadel Spray Primer)
CITADEL:
Nurgling Green (Dry)
Underhive Ash (Dry)
XV-88 (Base)
Retributor Armour (Base)
Iron Warriors (Base)
Balor Brown (Layer)
ARMY PAINTER:
Voodoo Shade (Fanatic Wash)
Uniform Grey (Fanatic)
Ironclad Grey (Fanatic)
Leather Brown (Fanatic)
Dusty Skull (Fanatic)
Camouflage Green (Fanatic)
Bootstrap Brown (Fanatic)
Plate Mail Metal (Fanatic)
Dark Tone (Fanatic Wash)
Skeleton Bone (Fanatic)
Necrotic Flesh (Fanatic)
VARNISH:
Colour Forge Matt Varnish Spray
THE BASE:
Put down a layer of PVA and sprinkle liberally with basing sand. Let it dry, then paint with thinned-down Vallejo Leather Brown. Once dry, overbrush liberally with Vallejo Flat Earth, then drybrush with Vallejo Tan Yellow. Add dots of PVA and static grass to taste, or use tufts you like.
Marine Juice MkIII/Sonic Tonic:
3 parts Dark Tone (Army Painter Wash)
3 parts Reikland Fleshshade (Citadel Shade)
4 parts Lahmian Medium (Citadel Technical)
...or just mix a bottle of each together and done!")
![Applying the KISS Principle: Keep it Simple, Steve-O! [How I Paint Things]](https://i.ytimg.com/vi/Yek5mnfsTEg/mqdefault.jpg "Applying the KISS Principle: Keep it Simple, Steve-O! [How I Paint Things]
I might be preaching to the choir for a lot of folks, but remember: Theres always a first time youve heard something! If youve never thought of using a coloured primer to get the job done on smashing out armies before, give it a shot. Something as simple as a drybrush and some spot highlights on armour or weapons will work wonders for knocking out an army extremely quickly, whether for the grim darkness of the far future or something more grounded in reality.
00:00 - Intro
01:00 - Priming Notes
02:13 - Drybrushing - Adding Texture
03:21 - Soft vs Hard Basecoats
05:48 - A Quick Note on Colour Choices
07:41 - The Final Step - More Texture
09:19 - The Finished Miniatures
Thanks to Producer Patrons Alan, Kyrie, Andrew, Jimmy, Rod, Phil, Robison, Woodcock, David Kinney, and Matt Dischner - as well as all the other Patrons that made this video possible, and Exit23 Games for recording equipment that helps keep the channel ticking over! Find out more at the following links:
https://www.patreon.com/sonicsledgehammer
https://twitter.com/sonicsledge
https://www.instagram.com/sonicsledgehammer/
https://ko-fi.com/docwholigan
http://exit23.games
PAINTS USED:
PRIMERS: Death Guard Green, Zandri Dust, Mechanicus Standard Grey
DRYBRUSH:
Over Death Guard Green, Underhive Ash (Citadel Dry)
Over Zandri Dust, Tyrant Skull (Citadel Dry)
Over Mechanicus Standard Grey, Longbeard Grey (Citadel Dry)
SOFT BASECOATS:
Webbing, boots, rifle sling: Leather Brown (Vallejo Model Color)
Mask (soft part): Karak Stone (Citadel Layer)
Boots, mask eyes and fittings: Black Grey (Vallejo Model Color)
Mask faceplate: Corax White (Citadel Base)
SONIC TONIC/MARINE JUICE MkIII:
1 bottle of Dark Tone (Army Painter Wash)
1 bottle of Reikland Fleshshade (Citadel Shade)
1 bottle of Lahmian Medium (Citadel Technical)
Works out to 3:3:4 ratio if you want to mix a smaller batch, but bottles are easiest!
HARD BASECOATS:
Metallics: Leadbelcher (Citadel Base)
Armour, gun casing: German Grey (Vallejo Model Color)
Wash: Dark Tone (Army Painter Wash)
Highlights: Silver (Vallejo Model Air), Matt White (Army Painter Fanatic)
BASES:
Urban Base: Layer of PVA followed by sand. Thin down German Camo Black Brown and apply liberally, like a wash. Once dry, heavy overbrush of a mid-tone grey like Basalt Grey. Drybrush lightly with Krieg Khaki. Tiny dots of PVA again under bigger rocks and then add static grass.
Desert Base: Thick layer of Vallejo Brown Earth texture paint, then drybrush Dark Sand. Boom, done.
Forest Base: Thick layer of Stirland Mud, heavily drybrushed Golgfag Brown, then lightly with Tyrant Skull. Add tufts to taste.")
![Can Speedpaint be... Speedier? Painting Death Guard in Real Time! [How I Paint Things]](https://i.ytimg.com/vi/Yt43tHpSSJE/mqdefault.jpg "Can Speedpaint be... Speedier? Painting Death Guard in Real Time! [How I Paint Things]
I was pretty satisfied that at a hair under 30 minutes per figure, I could paint a Death Guard army to a decent table standard in no time at all. But what if, I thought... I could do it even faster?
A slight variation on this will work perfectly well for the other white-armoured armies of the Heresy and beyond! White Scars, World Eaters or similar will benefit from a quick black and white prime, a couple speedpaints, then skdoosh! Done. Those metallic Speedpaints really surprised me.
If youre anything like me, youll probably enjoy cranking the speed on this to 1.5x and get the whole experience that little bit faster!
00:00 - Intro
01:21 - Explaining Priming
02:37 - Speedpaint Basecoats
15:52 - Wash/Shade
18:17 - Disaster Strikes!
20:31 - The Fixed, Finished Marine
Thanks to Producer Patrons Alan, Kyrie, Andrew, Jimmy, Rod, Phil, Robison, Woodcock, and David Kinney - as well as all the other Patrons that made this video possible, and Exit23 Games for recording equipment that helps keep the channel ticking over! Find out more at the following links:
https://www.patreon.com/sonicsledgehammer
https://twitter.com/sonicsledge
https://www.instagram.com/sonicsledgehammer/
https://ko-fi.com/docwholigan
http://exit23.games
THE BASE: Stirland Mud, drybrushed with Ryza Rust and Eldar Flesh. Army Painter tufts to taste, and paint the rim in Dryad Bark. Done!
PAINTS USED:
PRIMER:
Matt Black, Brainmatter Beige (Army Painter Spray)
ARMY PAINTER:
Saddle Brown
Broadsword Silver
Algae Green
Poppy Red
Hoplite Gold
Grim Black
Strong Tone
Speedpaint Medium
VARNISH:
Matt Varnish Spray (Army Painter)")
![Legends of the Old West - Painting US Cavalry [How I Paint Things]](https://i.ytimg.com/vi/Z1GikM3zvAA/mqdefault.jpg "Legends of the Old West - Painting US Cavalry [How I Paint Things]
Existing in some form since 1776, it wasnt until 1861 that the variously-named plains cavalry, Mounted Rangers, and Dragoons were finally named the United States Cavalry. Instrumental in Americas westward expansion, they were a welcome sight riding across the horizon for the homesteaders and settlers they were charged to protect, though the reality of their relentless advance is rather more complex than clear-cut classic westerns and shows like F Troop portray.
For some far-flung ranchers and settlers, the mounted men of the US Cavalry was as close as came to law enforcement, and in games like _Legends of the Old West_ they punch well above the weight their limited numbers would suggest. Woe betide if you were the outlaw whod caused trouble enough to have the Cavalry set on your tail!
Check out the entire Wanted range from 3DBreed here: https://www.3dbreed.es/join-or-die-wanted/
00:00 - Intro
00:53 - Introducing the Miniature & Priming
02:19 - Basecoats
08:59 - Shading; Check Description for Juice Recipe
11:41 - Highlighting
18:54 - The Finished Cavalry
Thanks to Producer Patrons Alan, Kyrie, Andrew, Jimmy, Rod, Phil, Robison, Woodcock, and David Kinney - as well as all the other Patrons that made this video possible, and Exit23 Games for recording equipment that helps keep the channel ticking over! Find out more at the following links:
https://www.patreon.com/sonicsledgehammer
https://twitter.com/sonicsledge
https://www.instagram.com/sonicsledgehammer/
https://ko-fi.com/docwholigan
http://exit23.games
THE BASE:
Vallejo Brown Earth texture paste, drybrushed Dark Sand. Paint the base rim with Brown Sand and apply tufts to taste. Done!
PAINTS USED:
PRIMER:
Leather Brown (Army Painter Spray)
ARMY PAINTER:
Tanned Flesh
Ultramarine Blue
Daemonic Yellow
Wolf Grey
Banshee Brown
Skeleton Bone
Grim Black
Fog Grey
Griffon Blue
Monster Brown
Moon Dust
Brainmatter Beige
CITADEL:
Kantor Blue (Base)
Retributor Armour (Base)
Iron Hands Steel (Base)
Liberator Gold (Layer)
Mechanicus Standard Grey (Base)
Cadian Fleshtone (Layer)
Kislev Flesh (Layer)
Dawnstone (Dry)
Administratum Grey (Layer)
MARINE JUICE:
Mix equal parts Reikland Fleshshade (Citadel Shade), Dark Tone (Army Painter Wash), and Lahmian Medium (Citadel Technical). Test it on something first, and if its too dark for your liking, add a little more medium.
VALLEJO:
German Grey
Black
Steel (Model Air)")
![Painting Iron Warriors: Siege Masters With a Little Shine [How I Paint Things]](https://i.ytimg.com/vi/ZBzChnncnIU/mqdefault.jpg "Painting Iron Warriors: Siege Masters With a Little Shine [How I Paint Things]
Recognized as masters of siege warfare, the Iron Warriors are dour, relentless, heedless of attrition... if they sound like my favourite Legion, the Death Guard, theres probably a good reason I had to think really hard about which Legion I was going to start playing The Horus Heresy with! Iron Warriors very nearly came out on top - not having to paint hazard stripes on grubby Death Guard was the deciding factor! 😅
00:00 - Intro
00:49 - Kitbash Notes
01:56 - Priming Notes
02:19 - Basecoats
11:28 - Shading
13:27 - Highlights & Finishing Touches
18:50 - The Finished Iron Warrior
Thanks to Producer Patrons Alan, Kyrie, Andrew, Rod, Phil, Ben, Robison, David Kinney, Fred, Fool in a Hat, Chris, and Timothy Ferguson - as well as all the other Patrons that made this video possible, and Exit23 Games for recording equipment that helps keep the channel ticking over! Find out more at the following links:
https://www.patreon.com/sonicsledgehammer
https://bsky.app/profile/sonicsledgehammer.bsky.social
https://www.instagram.com/sonicsledgehammer/
https://ko-fi.com/sonicsledge
http://exit23.games
Backdrop by Jon Hodgson Backdrops - https://handiwork.games/product-category/everything/backdrop-books #jhbackdrops everywhere a hashtag works for more!
PAINTS USED
PRIMER: Raven Black (Colour Forge Primer)
ARMY PAINTER:
Heavy Metal (Fanatic - John Blanche)
Gun Metal (Fanatic)
Grimdark Shadow (Wash - John Blanche)
Speedpaint Medium
Inner Light (Fanatic)
Matt Black (Fanatic)
True Brass (Fanatic)
Weapon Bronze (Fanatic)
Barbarian Flesh (Fanatic)
Tree Ancient (Fanatic)
Strong Skin Shade (Wash)
Strong Tone (Wash)
Death Metal (Fanatic)
Ruby Skin (Fanatic)
Dragon Red (Fanatic)
Legendary Red (Fanatic)
Plate Mail Metal (Fanatic)
Fur Brown (Fanatic)
THE BASE:
Apply a thick layer of GW Stirland Mud then heavily drybrush with AP Burning Ore, and lightly with AP Dorado Skin. Add tufts to taste and done!")
![Near-Instant Black Clothing - The Cadian Castellan as a Commissar [How I Paint Things]](https://i.ytimg.com/vi/ZEom2JxnFdA/mqdefault.jpg "Near-Instant Black Clothing - The Cadian Castellan as a Commissar [How I Paint Things]
Obviously, if you like the new commissar miniature, all these same methods will work on him as well!
00:00 - Intro
01:12 - Conversion Note & Priming
02:28 - No Highlight Black
06:21 - Basecoats
12:01 - Shading
13:06 - Highlights
16:41 - The Finished Castellommissar
Thanks to Producer Patrons Alan, Kyrie, Andrew, Jimmy, Rod, Phil, Robison and Woodcock - as well as all the other Patrons that made this video possible, and Exit23 Games for recording equipment that helps keep the channel ticking over! Find out more at the following links:
https://www.patreon.com/sonicsledgehammer
https://twitter.com/sonicsledge
https://www.instagram.com/sonicsledgehammer/
https://ko-fi.com/docwholigan
http://exit23.games
THE BASE: Stirland Mud, drybrushed with Golgfag Brown and then Tyrant Skull. Paint the base rim in Rhinox Hide, add a few very small dots of PVA to stick static grass in random spots on both the dirt and the rubble. Done!
PAINTS USED:
PRIMER:
Mechanicus Standard Grey (Citadel Spray Can)
CITADEL:
Ulthuan Grey (Layer)
White Scar (Layer)
Black Templar (Contrast)
Mephiston Red (Base)
Averland Sunset (Base)
Gal Vorbak Red (Base)
Iron Hands Steel (Base)
Retributor Armour (Base)
Corax White (Base)
Tyrant Skull (Dry)
Agrax Earthshade (Shade)
Lahmian Medium (Technical)
Cadian Fleshtone (Layer)
Kislev Flesh (Layer)
Ungor Flesh (Layer)
Wild Rider Red (Layer)
Gorthor Brown (Layer)
Wazzdakka Red (Layer)
Aethermatic Blue (Contrast)
Asurmen Blue (Contrast)
Liberator Gold (Layer)
ARMY PAINTER:
Tanned Flesh
VALLEJO:
Leather Brown (or Dryad Bark)
Black
Steel (Model Air)
VARNISH:
Varnish+ (Instar)
Ardcoat (Citadel Technical - on the plasma pistol)")
![Desert-Themed Guardsmen - Painting Chocolate Chip Camo [How I Paint Things]](https://i.ytimg.com/vi/ZoOSDA5w2GA/mqdefault.jpg "Desert-Themed Guardsmen - Painting Chocolate Chip Camo [How I Paint Things]
Blotches, squigglies, dib-dabs - be prepared for extremely technical language. Desert camo is as complicated as you want to make it, so take it from me: dont! Blotches and squigglies, folks. Theyll set you free.
Pick up the STLs for the Spacenam range, including the new Command Bits pack, from Reptilian Overlords: https://reptilianoverlords.com/ref/sonicsledgehammer/ This sneaky little affiliate link nets me a small commission of any STL purchases. Licensed printers worldwide can provide resin parts if you dont have your own 3D printer; check out the 3D Printers tab for someone near you! I dont earn anything from licensed printing, but you should get some cool-ass toys anyway!
Just as Ultramarines have, over the years, changed slightly in GWs house style, so too do Tyranid Hive Fleets occasionally switch up a colour or two. Im a sucker for the red hooves and dark chitin of Hive Fleet Leviathan, so if you prefer the slightly older style with the raft of new paints thatre available these days, check this out!
00:00 - Intro
00:44 - Basecoats
09:40 - Shading - Marine Juice
11:20 - Highlights & Finishing Touches
16:11 - The Finished Guardsman
Thanks to Producer Patrons Alan, Kyrie, Andrew, Jimmy, Rod, Phil, Robison, Woodcock, and David Kinney - as well as all the other Patrons that made this video possible, and Exit23 Games for recording equipment that helps keep the channel ticking over! Find out more at the following links:
https://www.patreon.com/sonicsledgehammer
https://twitter.com/sonicsledge
https://www.instagram.com/sonicsledgehammer/
https://ko-fi.com/docwholigan
http://exit23.games
THE BASE: Vallejo Brown Earth texture paste applied in a thin layer, drybrushed with Dark Sand. Paint the base rim in XV-88 and add tufts to taste - these are the Army Painter Mountain Tufts. Done!
PAINTS USED:
PRIMER:
Zandri Dust (Citadel Spray Can)
CITADEL:
Zandri Dust (Base)
Tyrant Skull (Dry)
Knight-Questor Flesh (Layer)
Corvus Black (Base)
Pallid Wych Flesh (Layer)
Morghast Bone (Base)
Steel Legion Drab (Base)
Leadbelcher (Base)
Cadian Fleshtone (Layer)
Kislev Flesh (Layer)
Evil Sunz Scarlet (Layer)
White Scar (Layer)
Talassar Blue (Contrast)
ARMY PAINTER:
Monster Brown
Tanned Flesh
VALLEJO:
German Camo Black Brown
Steel (Model Air)
VARNISH:
Varnish+ (Instar)")
![Painting Fireforge Samurai - Pre-Shade & Speedpaints [How I Paint Things]](https://i.ytimg.com/vi/_qivyv-Fszc/mqdefault.jpg "Painting Fireforge Samurai - Pre-Shade & Speedpaints [How I Paint Things]
Samurai are some of the most iconic warriors throughout history, clad in ornate, exquisitely detailed armour and equipment... though sometimes they took a slightly more pragmatic approach to their decor! Painting them doesnt have to be a chore!
The sites mentioned are all available from this link, which is an absolutely great resource for painting ideas! https://krigetkommer.weebly.com/renaissance-armies/samurai-painting-guide-part-1
00:00 - Intro
01:01 - Priming Notes
01:42 - Pre-Shade
03:26 - Painting Time!
15:11 - The Finished Samurai
Thanks to Producer Patrons Alan, Kyrie, Andrew, Rod, Phil, Ben, Robison, David Kinney, Fred, Fool in a Hat, and Chris - as well as all the other Patrons that made this video possible, and Exit23 Games for recording equipment that helps keep the channel ticking over! Find out more at the following links:
https://www.patreon.com/sonicsledgehammer
https://bsky.app/profile/sonicsledgehammer.bsky.social
https://www.instagram.com/sonicsledgehammer/
https://ko-fi.com/sonicsledge
http://exit23.games
PAINTS USED:
PRIMERS: Matt White (Army Painter Spray)
THE ARMY PAINTER:
Strong Tone (Wash)
Speedpaint Medium
Brainmatter Beige (Fanatic)
Peachy Flesh (Speedpaint)
Tyrian Navy (Speedpaint)
Pallid Bone (Speedpaint)
Slaughter Red (Speedpaint)
Murder Scene (Speedpaint)
Maize Yellow (Speedpaint)
Occultist Cloak (Speedpaint)
Grim Black (Speedpaint)
Weapon Bronze (Fanatic)
Plate Mail Metal (Fanatic)
Dark Tone (Wash)
Warped Yellow (Fanatic)
True Brass (Fanatic)
VARNISH:
Colour Forge Matt Varnish Spray
THE BASE: Layer of PVA followed by sand, painted first with thinned down Tree Ancient, then heavily drybrushed with Paratrooper Tan with a little touch of Urban Buff on the larger clumps of texture. A light sprinkling of PVA and some static grass, then Mountain Tufts from Army Painter to vary the height.")
![Painting for GREATHELM: Knights in a Flash! [How I Paint Things]](https://i.ytimg.com/vi/_wK30YUfLT0/mqdefault.jpg "Painting for GREATHELM: Knights in a Flash! [How I Paint Things]
Paint six guys to a reasonable standard in an afternoon. Thats the sort of thing youre here for, right? ✌ A couple simple drybrushes to finish off a very simple job and youre done in no time!
One thing I didnt mention in the video which I feel bears mentioning was Dr. Steffans reaction when someone mentioned the Knights Templar and Dan Browns The Da Vinci Code in the same sentence. I am quite certain that if Dan Brown were within reach at the time, we would have witnessed a mild-mannered German academic in cargo shorts, socks, and sandals, launch himself at an author with an intent to do mischief. Would have been a right laugh!
Peachys video on Greathelm: https://youtu.be/kW81oKn1g4E
Find Greathelms rules (and free Quickstart PDF!) and the fantastic companion app here: https://greathelm.indietabletop.club/
00:00 - Intro
00:52 - Priming Notes
01:53 - Basecoats
09:33 - Wash Time!
11:33 - Finishing Touches
14:16 - The Finished Knights
Thanks to Producer Patrons Alan, Kyrie, Andrew, Rod, Phil, Ben, Robison, David Kinney, Fred, Fool in a Hat, Chris, and Timothy Ferguson - as well as all the other Patrons that made this video possible, and Exit23 Games for recording equipment that helps keep the channel ticking over! Find out more at the following links:
https://www.patreon.com/sonicsledgehammer
https://bsky.app/profile/sonicsledgehammer.bsky.social
https://www.instagram.com/sonicsledgehammer/
https://ko-fi.com/sonicsledge
http://exit23.games
Backdrop by Jon Hodgson Backdrops - https://handiwork.games/product-category/everything/backdrop-books #jhbackdrops everywhere a hashtag works for more!
PAINTS USED
PRIMER: Raven Black (Colour Forge Spray)
ARMY PAINTER:
Gun Metal (Fanatic)
Skeleton Bone (Fanatic)
Ironclad Grey (John Blanche)
Paratrooper Tan (Fanatic)
Brainmatter Beige (Fanatic)
Oak Brown (Fanatic)
Brigandine Brown (Fanatic)
Weapon Bronze (Fanatic)
Greedy Gold (Fanatic)
Plate Mail Metal (Fanatic)
Moonstone Skin (Fanatic)
Strong Tone (Wash)
Dark Tone (Wash)
Uniform Grey (Fanatic)
Barbarian Flesh (Fanatic)
THE BASE: A generous layer of PVA and then dip the sucker into Krautcovers Soil of Sparta mix. Paint the base rim to taste - Ive used Desert Yellow - and done!")
