Peter Millard | Simple Monitor Stand - A Basic Build [video 525] @10MinuteWorkshop | Uploaded 1 year ago | Updated 1 hour ago
In this video I’m back on the #BasicBuild series and making a super-simple monitor stand from coloured MDF with just a #tracksaw and a #chisel. Enjoy!
Basic build videos are just that - simply constructed projects from readily available materials using a minimal - and entry-level - toolset (list below) and with each build we add a tool - or two - that grows the scope of the work we can take on.
Check out the basic builds playlist here - bit.ly/BasicBuilds
Full list of individual products used in my Amazon store at 10MinuteAmazon.com
Interested in the Birch ply alternatives or some Basic Builds with a minimum toolset? Subscribe to make sure you don’t miss a thing - http://bit.ly/10MWsubscribe
I used the Keith Brown Original Oil Wax finish - also available in clear and food safe versions here - etsy.com/uk/listing/1314398822/kb-oil-wax-wood-finish-triple-pack
I also used the Hand-i-Craft Carnauba wax, pick some up at Leo’s new store here - hand-i-craft.com/store-1-2
I used Finsa Fibracolour for this shelf, and thanks so much to FinsaUK for the larger than usual samples.
For Fibracolour cut to size see cutmyplastic.co.uk/wood-sheets/mdf/finsa-fibracolour-ez/red/L300-W100
Or contact @FinsaUK on Instagram for stockists - instagram.com/finsauk
+++++++++
Become a 10minuteworkshop Plus member and support the channel further - more details at 10minuteworkshop.com, or sign up directly at 10minuteworkshop.plus
**Support 10 Minute Workshop as a YouTube Member** http://bit.ly/10minuteMember
**Support 10 Minute Workshop on Patreon** - http://www.patreon.com/10minuteworkshop
**Please note that I am moving away from legacy member platforms to concentrate on my own memberships at 10MinuteWorkshop Plus; member benefits at Patreon and YTM are significantly reduced from October 2022.
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
Other videos of interest:-
Basic Builds playlist - bit.ly/BasicBuilds
Storage Cubes - youtu.be/Gyv-oGKRF30
Backyard, Budget DIY MFT -youtu.be/xIi-I04ocVM
Plywood shelves - youtu.be/gNobuRCBr_Q
Little Plywood Boxes - youtu.be/qg1jdYy0QTE
Drill Press Table - youtu.be/9w-MtpmBUWs
Ikea Curtain track DIY MFT - youtu.be/223QALIbnRc
DIY MFT follow-on - youtu.be/wyGNs1GYdCk
Dave Stanton’s Dog Stop video here - youtube.com/watch?v=GWcdI5aBB_M
Extrusion Confusion - a guide to MFT hardware - youtu.be/za5B-XrSuH0
Parkside or Macallister Plunge Saw? - youtu.be/Ebm-EEXNZHE
All my tracksaw-related videos are in a playlist here - http://bit.ly/TracksawWorkshop
New to the MFT or MultiFunction Table? Here’s a couple of explainers:-
Festool MFT - youtu.be/0V-p5F7SjO4
MFT follow-on - youtu.be/RxcVY8ZR2fQ
+++++++++
Heads up; as an Amazon Associate, an eBay Partner Network member, a Benchdogs and Rennie Tools affiliate, I may earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
++++++++
Browse the full Basic Build toolset here - amazon.co.uk/shop/petermillard1/list/3230K8XHXOAM8
Visit my Amazon store here - 10MinuteAmazon.com
I use Amazon OneLink - these links should open in your local Amazon store
The Basic Build toolset comprises:-
Heavy duty spring clamps - amzn.to/2Rw0b5u (US:similar) amzn.to/2qSwgZV)
Silverline sander - amzn.to/3QmUnKs
Cheap chisels [similar] - amzn.to/3NFmCTm (US: [similar] amzn.to/386DYZ4)
10.8v drill/driver [similar] - amzn.to/3tQAEJ0
Other handy consumables & gear:-
Stainless steel graphics knife, Olfa SAC-1 - amzn.to/3DnWzvJ
O3Adhesive CA glue - amzn.to/3Fubfw0
O3Adhesive Accelerator - amzn.to/3zwtehH
Polyvine Polyten PVA - amzn.to/2EY9Dgf (US(crazy price, just for reference) amzn.to/2Tm7RsC)
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Moldex 6810 in-ear defenders - amzn.to/2P2c5nP (US:amzn.to/2LgIsye)
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
+++++++++
In this video I’m back on the #BasicBuild series and making a super-simple monitor stand from coloured MDF with just a #tracksaw and a #chisel. Enjoy!
Basic build videos are just that - simply constructed projects from readily available materials using a minimal - and entry-level - toolset (list below) and with each build we add a tool - or two - that grows the scope of the work we can take on.
Check out the basic builds playlist here - bit.ly/BasicBuilds
Full list of individual products used in my Amazon store at 10MinuteAmazon.com
Interested in the Birch ply alternatives or some Basic Builds with a minimum toolset? Subscribe to make sure you don’t miss a thing - http://bit.ly/10MWsubscribe
I used the Keith Brown Original Oil Wax finish - also available in clear and food safe versions here - etsy.com/uk/listing/1314398822/kb-oil-wax-wood-finish-triple-pack
I also used the Hand-i-Craft Carnauba wax, pick some up at Leo’s new store here - hand-i-craft.com/store-1-2
I used Finsa Fibracolour for this shelf, and thanks so much to FinsaUK for the larger than usual samples.
For Fibracolour cut to size see cutmyplastic.co.uk/wood-sheets/mdf/finsa-fibracolour-ez/red/L300-W100
Or contact @FinsaUK on Instagram for stockists - instagram.com/finsauk
+++++++++
Become a 10minuteworkshop Plus member and support the channel further - more details at 10minuteworkshop.com, or sign up directly at 10minuteworkshop.plus
**Support 10 Minute Workshop as a YouTube Member** http://bit.ly/10minuteMember
**Support 10 Minute Workshop on Patreon** - http://www.patreon.com/10minuteworkshop
**Please note that I am moving away from legacy member platforms to concentrate on my own memberships at 10MinuteWorkshop Plus; member benefits at Patreon and YTM are significantly reduced from October 2022.
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
Other videos of interest:-
Basic Builds playlist - bit.ly/BasicBuilds
Storage Cubes - youtu.be/Gyv-oGKRF30
Backyard, Budget DIY MFT -youtu.be/xIi-I04ocVM
Plywood shelves - youtu.be/gNobuRCBr_Q
Little Plywood Boxes - youtu.be/qg1jdYy0QTE
Drill Press Table - youtu.be/9w-MtpmBUWs
Ikea Curtain track DIY MFT - youtu.be/223QALIbnRc
DIY MFT follow-on - youtu.be/wyGNs1GYdCk
Dave Stanton’s Dog Stop video here - youtube.com/watch?v=GWcdI5aBB_M
Extrusion Confusion - a guide to MFT hardware - youtu.be/za5B-XrSuH0
Parkside or Macallister Plunge Saw? - youtu.be/Ebm-EEXNZHE
All my tracksaw-related videos are in a playlist here - http://bit.ly/TracksawWorkshop
New to the MFT or MultiFunction Table? Here’s a couple of explainers:-
Festool MFT - youtu.be/0V-p5F7SjO4
MFT follow-on - youtu.be/RxcVY8ZR2fQ
+++++++++
Heads up; as an Amazon Associate, an eBay Partner Network member, a Benchdogs and Rennie Tools affiliate, I may earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
++++++++
Browse the full Basic Build toolset here - amazon.co.uk/shop/petermillard1/list/3230K8XHXOAM8
Visit my Amazon store here - 10MinuteAmazon.com
I use Amazon OneLink - these links should open in your local Amazon store
The Basic Build toolset comprises:-
Heavy duty spring clamps - amzn.to/2Rw0b5u (US:similar) amzn.to/2qSwgZV)
Silverline sander - amzn.to/3QmUnKs
Cheap chisels [similar] - amzn.to/3NFmCTm (US: [similar] amzn.to/386DYZ4)
10.8v drill/driver [similar] - amzn.to/3tQAEJ0
Other handy consumables & gear:-
Stainless steel graphics knife, Olfa SAC-1 - amzn.to/3DnWzvJ
O3Adhesive CA glue - amzn.to/3Fubfw0
O3Adhesive Accelerator - amzn.to/3zwtehH
Polyvine Polyten PVA - amzn.to/2EY9Dgf (US(crazy price, just for reference) amzn.to/2Tm7RsC)
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Moldex 6810 in-ear defenders - amzn.to/2P2c5nP (US:amzn.to/2LgIsye)
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
+++++++++
![Simple Monitor Stand - A Basic Build [video 525]](https://i.ytimg.com/vi/DFAAO4c4bsg/hqdefault.jpg "Simple Monitor Stand - A Basic Build [video 525]
In this video I’m back on the #BasicBuild series and making a super-simple monitor stand from coloured MDF with just a #tracksaw and a #chisel. Enjoy!
Basic build videos are just that - simply constructed projects from readily available materials using a minimal - and entry-level - toolset (list below) and with each build we add a tool - or two - that grows the scope of the work we can take on.
Check out the basic builds playlist here - https://bit.ly/BasicBuilds
Full list of individual products used in my Amazon store at 10MinuteAmazon.com
Interested in the Birch ply alternatives or some Basic Builds with a minimum toolset? Subscribe to make sure you don’t miss a thing - http://bit.ly/10MWsubscribe
I used the Keith Brown Original Oil Wax finish - also available in clear and food safe versions here - https://www.etsy.com/uk/listing/1314398822/kb-oil-wax-wood-finish-triple-pack
I also used the Hand-i-Craft Carnauba wax, pick some up at Leo’s new store here - https://www.hand-i-craft.com/store-1-2
I used Finsa Fibracolour for this shelf, and thanks so much to FinsaUK for the larger than usual samples.
For Fibracolour cut to size see https://www.cutmyplastic.co.uk/wood-sheets/mdf/finsa-fibracolour-ez/red/L300-W100/
Or contact @FinsaUK on Instagram for stockists - https://www.instagram.com/finsauk/
+++++++++
Become a 10minuteworkshop Plus member and support the channel further - more details at 10minuteworkshop.com, or sign up directly at 10minuteworkshop.plus
**Support 10 Minute Workshop as a YouTube Member** http://bit.ly/10minuteMember
**Support 10 Minute Workshop on Patreon** - http://www.patreon.com/10minuteworkshop
**Please note that I am moving away from legacy member platforms to concentrate on my own memberships at 10MinuteWorkshop Plus; member benefits at Patreon and YTM are significantly reduced from October 2022.
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
Other videos of interest:-
Basic Builds playlist - https://bit.ly/BasicBuilds
Storage Cubes - https://youtu.be/Gyv-oGKRF30
Backyard, Budget DIY MFT -https://youtu.be/xIi-I04ocVM
Plywood shelves - https://youtu.be/gNobuRCBr_Q
Little Plywood Boxes - https://youtu.be/qg1jdYy0QTE
Drill Press Table - https://youtu.be/9w-MtpmBUWs
Ikea Curtain track DIY MFT - https://youtu.be/223QALIbnRc
DIY MFT follow-on - https://youtu.be/wyGNs1GYdCk
Dave Stanton’s Dog Stop video here - https://www.youtube.com/watch?v=GWcdI5aBB_M
Extrusion Confusion - a guide to MFT hardware - https://youtu.be/za5B-XrSuH0
Parkside or Macallister Plunge Saw? - https://youtu.be/Ebm-EEXNZHE
All my tracksaw-related videos are in a playlist here - http://bit.ly/TracksawWorkshop
New to the MFT or MultiFunction Table? Here’s a couple of explainers:-
Festool MFT - https://youtu.be/0V-p5F7SjO4
MFT follow-on - https://youtu.be/RxcVY8ZR2fQ
+++++++++
Heads up; as an Amazon Associate, an eBay Partner Network member, a Benchdogs and Rennie Tools affiliate, I may earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
++++++++
Browse the full Basic Build toolset here - https://www.amazon.co.uk/shop/petermillard1/list/3230K8XHXOAM8
Visit my Amazon store here - 10MinuteAmazon.com
I use Amazon OneLink - these links should open in your local Amazon store
The Basic Build toolset comprises:-
Heavy duty spring clamps - https://amzn.to/2Rw0b5u (US:similar) https://amzn.to/2qSwgZV)
Silverline sander - https://amzn.to/3QmUnKs
Cheap chisels [similar] - https://amzn.to/3NFmCTm (US: [similar] https://amzn.to/386DYZ4)
10.8v drill/driver [similar] - https://amzn.to/3tQAEJ0
Other handy consumables & gear:-
Stainless steel graphics knife, Olfa SAC-1 - https://amzn.to/3DnWzvJ
O3Adhesive CA glue - https://amzn.to/3Fubfw0
O3Adhesive Accelerator - https://amzn.to/3zwtehH
Polyvine Polyten PVA - https://amzn.to/2EY9Dgf (US(crazy price, just for reference) https://amzn.to/2Tm7RsC)
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
+++++++++")
![[AD**]In this one I’m taking a look at one of two new cordless saws from@EvolutionPowerTools](https://i.ytimg.com/vi/Def7q_meGag/hqdefault.jpg "[AD**]In this one I’m taking a look at one of two new cordless saws from@EvolutionPowerTools
[AD**]In this one I’m taking a look at one of two new cordless saws from@EvolutionPowerTools")
![Peanut 2 Mini Jig[**Gifted/Ad] Video 439](https://i.ytimg.com/vi/DsvpAjGizKs/hqdefault.jpg "Peanut 2 Mini Jig[**Gifted/Ad] Video 439
In this video I take a closer look at the new Peanut 2 Mini Jig from @IntelligentFixings, available direct, or through @AxminsterTools Enjoy!
**This video may contain items that were supplied/gifted for review. I have not been paid to make this video or say nice things about the product; as an affiliate I may earn from qualifying sales.
I’d like to thank MEDITE SMARTPLY for their support of the channel at this time: MEDITE makes it real, discover more here:https://www.meditemakesitreal.com/?utm_source=YouTube&utm_medium=Influencer%20Video&utm_campaign=Peter%20Millard%20Q1%20Campaign
+++++++++
Peanut 2 Mini Jig bundle at Axminster Tools - https://www.tagserve.com/clickServlet?AID=2805&MID=485&PID=691&SID=3464&CID=1965&SUBID=&TARGETURL=https://www.axminstertools.com/peanut-2-mini-jig-complete-package-107760?utm_source=tag&utm_medium=affiliates&utm_content={TAG.AID}
Axminster tools on YouTube - https://www.youtube.com/user/axminstertoolcentre
Peanut 2 Mini Jig bundle at IF - https://shop.intelligentfixings.com/products/peanut-mini-jig-complete-set?ref=10minuteworkshop
Intelligent Fixings on YouTube - https://www.youtube.com/channel/UCk4S-y5jUNpWNBV4mcy8CHQ
Become a 10 Minute Workshop YouTube Member for exclusive content - http://bit.ly/10minuteMember
Visit my Patreon channel for exclusive content - http://www.patreon.com/10minuteworkshop
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
Other videos mentioned:-
Peanut 2 System - https://youtu.be/AjS2cAiQyzY
Birch Ply Bedside Cabinet - https://youtu.be/aJNzOZCHrGU
Cabinetry Basics P3 - https://youtu.be/iKle2JqhEV8
+++++++++
If you’re looking for a few gift ideas then take a look at my Etsy store, my Amazon Affiliate store, or any of the links below.
My Etsy - http://bit.ly/10minuteShop
Amazon store - http://bit.ly/10minuteworkshop
My ‘social’ links & contacts in one place - https://www.10minuteworkshop.com/links
Full list of ‘Stuff I use’ at Full list of ‘Stuff I use’ at https://www.10minuteworkshop.com
Connect with me on twitter @10minuteshop
Connect with me on Instagram @10minuteworkshop
+++++++
As an Amazon Associate, I earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - https://www.amazon.co.uk/shop/petermillard1
++++++++
Used/featured in this video:-
Festool MFT - https://amzn.to/2x49HHE (US: https://amzn.to/2J25aKy)
Festool Midi extractor - http://amzn.to/2tCIN3Q (US: http://amzn.to/2rKNIOx)
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Bessey Duo Klamp - http://amzn.to/2tsSWQs (US:http://amzn.to/2sVaRBH)
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Mirock square - https://etsy.me/2MC0RT
Mirock 500mm T-ruler - https://etsy.me/365P0KE
Festool PDC 18/4 - http://amzn.to/2s3J0eq (US: http://amzn.to/2tWUHEL)
Festool T18 drill/driver - https://amzn.to/2QAHpK1 (US: https://amzn.to/2RPuOCR)
Spax screws - http://amzn.to/2oYWydc (US: http://amzn.to/2oOjkDT)
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
+++++++++")
![Tiny 12v Bosch Tracksaw [video 559]](https://i.ytimg.com/vi/E6cQbJcjFCg/hqdefault.jpg "Tiny 12v Bosch Tracksaw [video 559]
In this one I’m taking a first look at a tiny Bosch 12v circular saw with a trick up its sleeve - it turns into a tracksaw! I used it recently as the main saw for some more workshop drawers, and this is how it worked out. Enjoy!
.
Sign up for the free newsletter at 10minuteworkshop.email or 10MW.email and get the free Simple Drawer Construction factsheet, included in the next issue!
Can’t wait? Become a 10minuteworkshop Plus member* and get the free factsheet and other exclusive member content right away - more details at 10minuteworkshop.com, or sign up directly at 10minuteworkshop.plus
*Behind the Scenes, Marking Out and At the Bench members have instant access as part of their subscription
+++++++++
Visit the 10MinuteWorkshop store for the Loose Tenon Jig 30 and ‘Square Enough’ assembly guides at www.10minute.shop
+++++++++
Heads up; as an Amazon Associate, an eBay Partner Network member, a Trend UK, Benchdogs UK, O3Adhesives and Rennie Tools affiliate, I may earn from qualifying purchases made through these links, and many thanks if you do.
Browse my Amazon store at 10MinuteAmazon.com
Benchdogs. Use offer code 10minuteworkshop at checkout for 5% discount across the board at https://benchdogs.co.uk/?ref=1x_p0bagtnr
+++++++++
Become a 10minuteworkshop Plus member for exclusive content - more details at 10minuteworkshop.com, or sign up directly at 10minuteworkshop.plus
Please note that I have moved away from legacy member platforms to concentrate on my own memberships at 10MinuteWorkshop Plus; member benefits at Patreon and YTM have been significantly reduced since October 2022.
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
Other videos and playlists of interest:-
Tracksaw workshop playlist - http://bit.ly/TracksawWorkshop
Oak and Birch ply drawers - https://youtu.be/tIbJ-93TMZw
Top Drawer! - https://youtu.be/HcNRId9a3Lw
Workshop Cabinet with Modular Storage https://youtu.be/Ybhnnqro4Cs
My cheap nailer and compressor - https://youtu.be/eJo3JMkv3JE
Birch ply drawer router cabinet - https://youtu.be/BfV0426rog0
Baltic Birch Basics - https://youtu.be/GRMpFTuq_V0
Festool’s Big Mistake? - https://youtu.be/Wc0MOV3HtjI
All About Drawers playlist - https://bit.ly/AllAboutDrawers
+++++++++
Useful links:
Browse the 10MW Everyday Workshop Essentials list here - https://amzn.to/3KLNIaM
Visit my Amazon store here - 10MinuteAmazon.com
I bought the Bosch 12v saw bare - https://amzn.to/3TLyoBa
Bosch 12v saw full kit - https://amzn.to/3H4qfAt
A3rd party 6ah battery - https://amzn.to/48knaYZ
Benchdogs products gifted without obligation:-
Benchdogs precision rulers (gifted) - https://benchdogs.co.uk/collections/rulers?ref=1x_p0bagtnr
Benchdogs precision squares (gifted)- https://benchdogs.co.uk/products/stainless-steel-square-300?ref=1x_p0bagtnr
Benchdogs CSC SYS Fence (gifted) - https://benchdogs.co.uk/collections/csc-fence-and-adaptor-plate/products/csc-fence-and-adaptor-plate?ref=1x_p0bagtnr")
![Is this even legal? Sharp & Scary router bit [video 561]](https://i.ytimg.com/vi/EBJZlI9IVlI/hqdefault.jpg "Is this even legal? Sharp & Scary router bit [video 561]
In this one I take a look at a router bit that looks like a medieval instrument of torture! As mentioned in the video I’m not linking to these bits, but they’re easy enough to find if you choose to go looking for them. And the legal aspect is wether they comply with health & safety regulations in the UK.
Edited to add: in the video I refer to the price of the replacement bits for the Trend rotatip bits, and its been pointed out that the price I quoted was for a pack of 10, so not as costly to replace as originally feared, though still significantly more than the cost of the replacement tips on this bit.
Can you make sense of this? Health & Safety Executive guidance on limited cutter projection tooling - https://www.hse.gov.uk/pubns/wis37.pdf
BE EN 847 - tools for woodworking; safety requirements - https://www.hse.gov.uk/woodworking/standards.htm
Thanks so much to Keith @ragnbonebrown for the clips of his planer; see Keith’s planer extraction fix video here - htps://youtu.be/DJfZaAxuD7U?si=D-yg-3IRIlVe3-ly
+++++++++
Sign up for the free newsletter at 10minuteworkshop.email or 10MW.email and get the free Simple Drawer Construction factsheet, included in the next issue!
Can’t wait? Become a 10minuteworkshop Plus member* and get the free factsheet and other exclusive member content right away - more details at 10minuteworkshop.com, or sign up directly at 10minuteworkshop.plus
*Behind the Scenes, Marking Out and At the Bench members have instant access as part of their subscription
+++++++++
Visit the 10MinuteWorkshop store for the Loose Tenon Jig 30 and ‘Square Enough’ assembly guides at www.10minute.shop
+++++++++
Heads up; as an Amazon Associate, an eBay Partner Network member, a Trend UK, Benchdogs UK, O3Adhesives and Rennie Tools affiliate, I will earn from qualifying purchases made through these links, and many thanks if you do.
Browse my Amazon store at 10MinuteAmazon.com
Benchdogs. Use offer code 10minuteworkshop at checkout for 5% discount across the board at https://benchdogs.co.uk/?ref=1x_p0bagtnr
+++++++++
Become a 10minuteworkshop Plus member for exclusive content - more details at 10minuteworkshop.com, or sign up directly at 10minuteworkshop.plus
Please note that I have moved away from legacy member platforms to concentrate on my own memberships at 10MinuteWorkshop Plus; member benefits at Patreon and YTM have been significantly reduced since October 2022.
+++++++++
Other videos and playlists of interest:-
Bosch Tiny 12v Tracksaw - https://youtu.be/E6cQbJcjFC
Oak and Birch ply drawers - https://youtu.be/tIbJ-93TMZw
Top Drawer! - https://youtu.be/HcNRId9a3Lw
Workshop Cabinet with Modular Storage https://youtu.be/Ybhnnqro4Cs
Birch ply drawer router cabinet - https://youtu.be/BfV0426rog0
Baltic Birch Basics - https://youtu.be/GRMpFTuq_V0
All About Drawers playlist - https://bit.ly/AllAboutDrawers
AUK Router and Jessem Lift - https://youtu.be/h47fFhhohgs
+++++++++
Useful links:
Browse the 10MW Everyday Workshop Essentials list here - https://amzn.to/3KLNIaM
Visit my Amazon store here - 10MinuteAmazon.com
3M strong double-sided tape - https://amzn.to/3u2Ekqw
‘Everyday’ double-sided tape - https://amzn.to/3th16eL
AUK router supplied for long-term review by Woodworkers Workshop. Use the offer code ’10MINUTEWORKSHOP’ with the links below for a 5% discount on these products, and thanks so much to Woodworkers Workshop for extending that offer.
https://woodworkersworkshop.co.uk/auktools-2400w-fixed-base-router-remote-speed-control-and-nvr/?ref=YUDlxZ4f
https://woodworkersworkshop.co.uk/auktools-2400w-fixed-base-router/?ref=YUDlxZ4f
https://woodworkersworkshop.co.uk/auktools-1500w-fixed-base-router/?ref=YUDlxZ4f
Trend double bearing flush cut 19 x 50mm x 1/2” shank - https://amzn.to/48kno1g
Benchdogs products gifted without obligation:-
Benchdogs precision rulers (gifted) - https://benchdogs.co.uk/collections/rulers?ref=1x_p0bagtnr
Benchdogs precision squares (gifted)- https://benchdogs.co.uk/products/stainless-steel-square-300?ref=1x_p0bagtnr
Benchdogs CSC SYS Fence (gifted) - https://benchdogs.co.uk/collections/csc-fence-and-adaptor-plate/products/csc-fence-and-adaptor-plate?ref=1x_p0bagtnr")
![Lidl Parkside or Screwfix MacAllister? [video 454]](https://i.ytimg.com/vi/Ebm-EEXNZHE/hqdefault.jpg "Lidl Parkside or Screwfix MacAllister? [video 454]
In this video I take a look at a pair of entry-level £70/$99 plunge saws, the Screwfix #MacAllister and the #Lidl #Parkside, to try and help you figure out where’s best to put your money. Enjoy!
Extra Parkside rails are available through Lidl customer services, or directly here -
https://www.kompernass.com/en/accessories/843/guide-rail
+++++++++
Become a 10 Minute Workshop YouTube Member for exclusive content - http://bit.ly/10minuteMember
Visit my Patreon channel for exclusive content - http://www.patreon.com/10minuteworkshop
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
Other videos mentioned in passing:-
Festool vs Cheap P 1 - https://youtu.be/_8sagpnlF1Q
Trascksaw workshop P1 - https://youtu.be/8JQjGwZT3Ak
A Lidl blade upgrade - https://youtu.be/6TNaspl5DpY
Which rails work; a guide to guide rails - https://youtu.be/_HtpT_bK7zw
Tracksaw workshop & all tracksaw-related videos playlist - http://bit.ly/TracksawWorkshop
+++++++++
If you’re looking for a few gift ideas then take a look at my Etsy store, my Amazon Affiliate store, or any of the links below.
My Etsy - http://bit.ly/10minuteShop
Amazon store - http://bit.ly/10minuteworkshop
My ‘social’ links & contacts in one place - https://www.10minuteworkshop.com/links
Full list of ‘Stuff I use’ at Full list of ‘Stuff I use’ at https://www.10minuteworkshop.com
Connect with me on twitter @10minuteshop
Connect with me on Instagram @10minuteworkshop
+++++++
Heads up; as an Amazon Associate, and an eBay Partner Network member, I earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - https://www.amazon.co.uk/shop/petermillard1
eBay UK - http://bit.ly/Buy_eBay_UK
++++++++
Used/featured in this video:-
Lidl Parkside plunge saw - https://www.lidl.co.uk/p/diy-tools/parkside-plunge-saw/p42993
Screwfix MacAllister plunge saw - https://www.screwfix.com/p/mac-allister-msps1200-165mm-electric-plunge-saw-220-240v/274gf#product_additional_details_container
Triton 48t blade - https://amzn.to/2EQgUMJ
Evolution guide rails - https://amzn.to/2IhI149
Festool lever clamp - http://amzn.to/2pOohLD (US: http://amzn.to/2pnFZIM)
Festool MFT - https://amzn.to/2x49HHE (US: https://amzn.to/2J25aKy)
Festool Midi extractor - http://amzn.to/2tCIN3Q (US: http://amzn.to/2rKNIOx)
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Mirock square - https://etsy.me/2MC0RT
Mirock 500mm T-ruler - https://etsy.me/365P0KE
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
+++++++++")
![3D Printed Drilling Guide [video 575]](https://i.ytimg.com/vi/FcD_fYCV4RY/hqdefault.jpg "3D Printed Drilling Guide [video 575]
In this one it’s my pleasure to show a 3D printed drilling guide for the 10MinuteWorkshoop MultiJig, available now from Stu Parker at SPWood Creations here - https://77c6a6-2.myshopify.com/products/10minuteworkshop-multijig-drilling-guide
+++++++++
This video uses the 10MW Router MultiJig, full launch video here - https://youtu.be/V-K4rnD085o
You can buy or pre-order the plain jig here - https://10minuteworkshop.myshopify.com/products/router-multijig
You can buy or pre-order the full bundle here - https://10minuteworkshop.myshopify.com/products/router-multijig-full-bundle
There’s a feature-by-feature walkthrough video here - https://youtu.be/j01wYe9mUq0
And a reference guide available here - https://www.dropbox.com/scl/fi/l7c5sjtpjfcthnx96bchq/MultiJig-Reference-Guide-P1.pdf?rlkey=0p80cxbx7czuyvqdjc9h20qp6&st=s62r34d1&dl=0
+++++++++
Sign up for the free newsletter at 10minuteworkshop.email or 10MW.email to stay in touch.
Please note that I have moved away from legacy member platforms to concentrate on my own memberships at 10MinuteWorkshop Plus; member benefits at Patreon and YTM have been significantly reduced since October 2022.
+++++++++
Visit the 10MinuteWorkshop store for 10MW Products and project plans, at www.10minute.shop or in the product shelf directly beneath this video.
+++++++++
Heads up; as an Amazon Associate, an eBay Partner Network member, a Trend UK, Benchdogs UK, O3Adhesives and Rennie Tools affiliate, I will earn from qualifying purchases made through these links, and many thanks if you do.
Browse my Amazon store at 10MinuteAmazon.com
Benchdogs. Use offer code 10minuteworkshop at checkout for 5% discount across the board at https://benchdogs.co.uk/?ref=1x_p0bagtnr
+++++++++
Other videos and playlists of interest:-
10MinuteWorkshop Router MultiJig - https://youtu.be/V-K4rnD085o
DIY drilling Guide - https://youtu.be/TglP1kHDjSw
6 Top Tapes - https://youtu.be/zj_IKd8XYNI
DIY SYS-TOTE - https://youtu.be/vhW04TJCgMU
Aircraft grade plywood inserts - https://youtu.be/kA-LswBI_oY
Oak and Birch Ply drawers - https://youtu.be/tIbJ-93TMZw
Sharp and a little bit Scary - https://youtu.be/EBJZlI9IVlI
Bargain or Burden; first look at Wolfcraft ‘MFT’ - https://youtu.be/pqy8IUnLDY4
3 Quick Fixes (Wolfcraft ‘MFT’) - https://youtu.be/3qCU8dzIJ_c
+++++++++
Useful links:
Everything in this video on one list here - https://amzn.to/4eaUSn6
Browse the 10MW Everyday Workshop Essentials list here - https://amzn.to/3KLNIaM
Visit my Amazon store here - 10MinuteAmazon.com
Items used in the DIY drill guide:
Trend extra length guide bush - https://amzn.to/3Rcbzo4
Bosch Pro 30mm Forstner bit - https://amzn.to/3VtxM3E
Bosch Pro 20mm Forstner bit - https://amzn.to/4eckb8q
Fisch 5mmm lip & spur / brad point bit - https://amzn.to/4aNq9th
Fisch 8mm lip & spur / brad point bit- https://amzn.to/4e6tKFN
KWB Drillblock - https://amzn.to/3V8IhrW
Sleeve bearings 5 x 8 x 16mm - https://amzn.to/3RakGG3
3M strong double-sided tape - https://amzn.to/3x3MBk0
Thin plywood sheets - https://amzn.to/45e2npm
5mm steel dowel pins - https://amzn.to/3Kru3NQ
Tailors’ awl - https://amzn.to/4aBHCVx
Trend GB/US/30 PorterCable style screw-on guide bush - https://amzn.to/3wOPyo1 (US: https://amzn.to/3ICmDqa)")
![Baltic Birch Basics [video 518]](https://i.ytimg.com/vi/GRMpFTuq_V0/hqdefault.jpg "Baltic Birch Basics [video 518]
In this video I take a closer look at the benefits of Birch Plywood, sometimes called ‘Baltic’ Birch. For clarity, I’m British and the Birch plywood available here is generally what our American cousins would refer to as Baltic Birch i.e. thin plywood layers with thicker face veneers, all in Birch throughout. In the UK boards that have only the face veneers in Birch are described as such e.g. ‘Birch-faced Poplar’ or ‘Birch veneered’ plywood.
Most Birch ply sold here is exterior grade 8’ x 4’ sheets, and while interior grade 5’ x 5’ sheets are available they’re typically a special order, and I’ve never actually seen any in 20-odd years in the business.
Interested in the Birch Ply alternatives or how the drawers & runners work out? Subscribe to make sure you don’t miss a thing - http://bit.ly/10MWsubscribe
+++++++++
Become a 10minuteworkshop Plus member and support the channel further - more details at 10minuteworkshop.com, or sign up directly at 10minuteworkshop.plus
Please note that I have moved away from legacy member platforms to concentrate on my own memberships at 10MinuteWorkshop Plus; member benefits at Patreon and YTM will be significantly reduced from October 2022.
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
Other videos of interest:-
Oops! Veneer sanding - https://youtu.be/ojFmNfjaMCA
Cheap or Cheat? I make a cabinet for less cash - https://youtu.be/5oJshwlDVKo
All my ‘Basics’ videos in a playlist here - https://bit.ly/woodworkbasics
Dowel Jig Basics - https://youtu.be/zTj_hiEVfvw
Loose Tenon Basics - https://youtu.be/t86QGUn7dAI
Cabinetry Basics P1 - https://youtu.be/3N_T-YpkBCg
Money, Mouth, Mirka - https://youtu.be/5XDUWQ_Jodo
Ikea Curtain track DIY MFT - https://youtu.be/223QALIbnRc
Workshop cabinets and shelves - https://youtu.be/iaB_CL5md8U
Basic plywood boxes - https://youtu.be/li5AIXw3XPE
New to track saws? Tracksaw workshop & all tracksaw-related videos in a playlist here - http://bit.ly/TracksawWorkshop
+++++++++
Handy consumables & gear:-
I am an associate of Amazon, Benchdogs, Rennie Tools and an eBay Partner Network member; I may earn a commission from qualifying purchases made through these links.
Plywood: A Material Story - https://amzn.to/3Z6gvfO (US; nope, sorry)
Benchdogs. Use offer code 10minuteworkshop at checkout for 5% discount across the board at benchdogs.co.uk
Benchdogs precision rulers (Gifted) - https://benchdogs.co.uk/collections/rulers?ref=1x_p0bagtnr
Bessey DuoKlamp - https://amzn.to/3eDz1Ig (US: https://amzn.to/3w1s1dM)
Festool lever clamp - http://amzn.to/2pOohLD (US: http://amzn.to/2pnFZIM)
Festool Midi extractor - http://amzn.to/2tCIN3Q (US: http://amzn.to/2rKNIOx)
Stainless steel graphics knife, Olfa SAC-1 - https://amzn.to/3DnWzvJ
Polyvine Polyten PVA - https://amzn.to/2EY9Dgf (US(crazy price, just for reference) https://amzn.to/2Tm7RsC)
Tongue depressors (waxing spatulas) - https://amzn.to/2zpHlp8 (US: similar) https://amzn.to/2S1QLP7)
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
+++++++++")
![£5 Fix for the Festool Droop [video 448]](https://i.ytimg.com/vi/Ga46Tdpzod8/hqdefault.jpg "£5 Fix for the Festool Droop [video 448]
You know how it’s the little things that drive you nuts? Well in this video I find a £5 / $5 fix for the extractile dysfunction droop on Festool’s TS55R. Enjoy!
+ + +
I asked in the video if anyone was interested in 3D printing these, and Im happy to say Mike at https://novicewoodworker.com has a version available for sale here:-
https://novicewoodworker.com/shop/festool-track-saw-hose-adapter/
And Nic Gibbens has plans for them for sale (for the folks who want to 3D print their own) on his etsy here:-
https://etsy.me/3ncZxed
Ive seen photos of the adapter mounted on the saw and they look excellent - go and check them out, and thanks so much guys for putting this together so fast!
+ + +
For anyone into their 3D printing, theres a diagram of whats needed here - https://www.dropbox.com/s/d8z2njfphvyc1f3/Vac%20adapter.png?dl=0
Thanks to Karl @StrawbyteWorkshop for the dust cover - https://www.strawbyte.com/merchandise?category=Festool+Accessories
#Festool #Extraction #Fix
++++++++
Other videos mentioned:-
443, Ten Tools I wish I had when I was starting out - https://youtu.be/enmHfvgRTrw
256, The Festool System - https://youtu.be/AHEMSCGspec
211, Shop Vac autostart (Inner tube trick) - https://youtu.be/Qo5kpKMX_Vw
071, Festool cheap tool Tracksaw P1 - https://youtu.be/_8sagpnlF1Q
+++++++++
Become a 10 Minute Workshop YouTube Member for exclusive content - http://bit.ly/10minuteMember
Visit my Patreon channel for exclusive content - http://www.patreon.com/10minuteworkshop
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
If you’re looking for a few gift ideas then take a look at my Etsy store, my Amazon Affiliate store, or any of the links below.
My Etsy - http://bit.ly/10minuteShop
Amazon store - http://bit.ly/10minuteworkshop
My ‘social’ links & contacts in one place - https://www.10minuteworkshop.com/links
Full list of ‘Stuff I use’ at Full list of ‘Stuff I use’ at https://www.10minuteworkshop.com
Connect with me on twitter @10minuteshop
Connect with me on Instagram @10minuteworkshop
+++++++
Heads up; as an Amazon Associate, and an eBay Partner Network member, I earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - https://www.amazon.co.uk/shop/petermillard1
eBay UK - http://bit.ly/Buy_eBay_UK
++++++++
Used/Featured in this video:-
Festool TS55 R Plunge Saw - http://amzn.to/2pGvzDS (US: http://amzn.to/2oOgGhw)
The spare part I used can be found here - http://www.toolsparesonline.com/products/7694-dust-connection.aspx
NB: I found the photographs on the parts page to be a little unclear and ordered the wrong part, initially; it is part #050 that you need.
Other handy gear:-
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Mirock square - https://etsy.me/2MC0RT
Mirock 500mm T-ruler - https://etsy.me/365P0KE
Festool PDC 18/4 - http://amzn.to/2s3J0eq (US: http://amzn.to/2tWUHEL)
Festool T18 drill/driver - https://amzn.to/2QAHpK1 (US: https://amzn.to/2RPuOCR)
Spax screws - http://amzn.to/2oYWydc (US: http://amzn.to/2oOjkDT)
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
+++++++++")
![The Epic Transformation Of Our Kitchen Renovation! [*ad] [video 576]](https://i.ytimg.com/vi/Gd9RVXruLbk/hqdefault.jpg "The Epic Transformation Of Our Kitchen Renovation! [*ad] [video 576]
Click here http://www.hellofresh.co.uk/WORKSHOP60 to enjoy an exclusive offer of 60% off your first box, a 25% discount for the following two months and FREE dessert for life! Alternatively, you can use the code “WORKSHOP60”. This special offer is available for new customers as well as those who cancelled their subscription twelve months ago or more. #AD **Terms and conditions apply, see website for details.
+++++++++
In this one we go back to the very start of our Kitchen extension and ground floor renovation of our #London #Victorian #terrace and take you through the process roughly on the same timeline to present day.
Taking on a build like this? Sign up to the Our Big Build newsletter segment to stay in touch at https://tenminuteworkshop.myflodesk.com/ourbigbuild
+++++++++
Please note that I have moved away from legacy member platforms to concentrate on my own memberships at 10MinuteWorkshop Plus; member benefits at Patreon and YTM have been significantly reduced since October 2022.
+++++++++
Visit the 10MinuteWorkshop store for 10MW Products and project plans, at www.10minute.shop or in the product shelf directly beneath this video.
+++++++++
Heads up; as an Amazon Associate, an eBay Partner Network member, a Trend UK, Benchdogs UK, O3Adhesives and Rennie Tools affiliate, I will earn from qualifying purchases made through these links, and many thanks if you do.
Browse my Amazon store at 10MinuteAmazon.com
Benchdogs. Use offer code 10minuteworkshop at checkout for 5% discount across the board at https://benchdogs.co.uk/?ref=1x_p0bagtnr
+++++++++
Other videos and playlists of interest:-
No going back (Our Big Build primer) - https://youtu.be/eULepp_7CIM
One Smaller Stool [video 576] - https://youtu.be/KDe7ZQO83mE
10MinuteWorkshop Router MultiJig - https://youtu.be/V-K4rnD085o
DIY drilling Guide - https://youtu.be/TglP1kHDjSw
6 Top Tapes - https://youtu.be/zj_IKd8XYNI
DIY SYS-TOTE - https://youtu.be/vhW04TJCgMU
Aircraft grade plywood inserts - https://youtu.be/kA-LswBI_oY
Oak and Birch Ply drawers - https://youtu.be/tIbJ-93TMZw
Sharp and a little bit Scary - https://youtu.be/EBJZlI9IVlI
Bargain or Burden; first look at Wolfcraft ‘MFT’ - https://youtu.be/pqy8IUnLDY4
3 Quick Fixes (Wolfcraft ‘MFT’) - https://youtu.be/3qCU8dzIJ_c
+++++++++
Useful links:
Duo design and architecture - https://duo-architecture.co.uk
Project 1 Design and Build - https://www.project1db.co.uk
Browse the 10MW Everyday Workshop Essentials list here - https://amzn.to/3KLNIaM
Visit my Amazon store here - 10MinuteAmazon.com
Details on planning permission UK - https://www.planningportal.co.uk
Party walls and building works - https://www.gov.uk/party-walls-building-works
RIBA Find an Architect - https://www.architecture.com/working-with-an-architect/how-do-i-find-an-architect
Average building costs estimator - https://buildpartner.com/average-building-costs-per-sq-m-for-2024-a-uk-guide/")
![Mirka Deros Random Orbital Sander [video 406]](https://i.ytimg.com/vi/GxkTdbSXTsc/hqdefault.jpg "Mirka Deros Random Orbital Sander [video 406]
Mirka Deros Random Orbital Sander [video 406]")
