Peter Millard | Basic Woodworking Joints: the Half- lap #basicwoodworking #woodworking #diy @10MinuteWorkshop | Uploaded 1 year ago | Updated 1 hour ago
Basic Woodworking Joints: the Half-lap
A simple joint that can be made with basic tools and increases the gluing area.
More detail and variations in Which Joint When? [video 539] - youtu.be/x7XkdWApAQE
Joinery Basics Playlist - bit.ly/JoineryBasics
Basic Woodworking Joints: the Half-lap
A simple joint that can be made with basic tools and increases the gluing area.
More detail and variations in Which Joint When? [video 539] - youtu.be/x7XkdWApAQE
Joinery Basics Playlist - bit.ly/JoineryBasics
![3D Printed Drilling Guide [video 575]](https://i.ytimg.com/vi/FcD_fYCV4RY/hqdefault.jpg "3D Printed Drilling Guide [video 575]
In this one it’s my pleasure to show a 3D printed drilling guide for the 10MinuteWorkshoop MultiJig, available now from Stu Parker at SPWood Creations here - https://77c6a6-2.myshopify.com/products/10minuteworkshop-multijig-drilling-guide
+++++++++
This video uses the 10MW Router MultiJig, full launch video here - https://youtu.be/V-K4rnD085o
You can buy or pre-order the plain jig here - https://10minuteworkshop.myshopify.com/products/router-multijig
You can buy or pre-order the full bundle here - https://10minuteworkshop.myshopify.com/products/router-multijig-full-bundle
There’s a feature-by-feature walkthrough video here - https://youtu.be/j01wYe9mUq0
And a reference guide available here - https://www.dropbox.com/scl/fi/l7c5sjtpjfcthnx96bchq/MultiJig-Reference-Guide-P1.pdf?rlkey=0p80cxbx7czuyvqdjc9h20qp6&st=s62r34d1&dl=0
+++++++++
Sign up for the free newsletter at 10minuteworkshop.email or 10MW.email to stay in touch.
Please note that I have moved away from legacy member platforms to concentrate on my own memberships at 10MinuteWorkshop Plus; member benefits at Patreon and YTM have been significantly reduced since October 2022.
+++++++++
Visit the 10MinuteWorkshop store for 10MW Products and project plans, at www.10minute.shop or in the product shelf directly beneath this video.
+++++++++
Heads up; as an Amazon Associate, an eBay Partner Network member, a Trend UK, Benchdogs UK, O3Adhesives and Rennie Tools affiliate, I will earn from qualifying purchases made through these links, and many thanks if you do.
Browse my Amazon store at 10MinuteAmazon.com
Benchdogs. Use offer code 10minuteworkshop at checkout for 5% discount across the board at https://benchdogs.co.uk/?ref=1x_p0bagtnr
+++++++++
Other videos and playlists of interest:-
10MinuteWorkshop Router MultiJig - https://youtu.be/V-K4rnD085o
DIY drilling Guide - https://youtu.be/TglP1kHDjSw
6 Top Tapes - https://youtu.be/zj_IKd8XYNI
DIY SYS-TOTE - https://youtu.be/vhW04TJCgMU
Aircraft grade plywood inserts - https://youtu.be/kA-LswBI_oY
Oak and Birch Ply drawers - https://youtu.be/tIbJ-93TMZw
Sharp and a little bit Scary - https://youtu.be/EBJZlI9IVlI
Bargain or Burden; first look at Wolfcraft ‘MFT’ - https://youtu.be/pqy8IUnLDY4
3 Quick Fixes (Wolfcraft ‘MFT’) - https://youtu.be/3qCU8dzIJ_c
+++++++++
Useful links:
Everything in this video on one list here - https://amzn.to/4eaUSn6
Browse the 10MW Everyday Workshop Essentials list here - https://amzn.to/3KLNIaM
Visit my Amazon store here - 10MinuteAmazon.com
Items used in the DIY drill guide:
Trend extra length guide bush - https://amzn.to/3Rcbzo4
Bosch Pro 30mm Forstner bit - https://amzn.to/3VtxM3E
Bosch Pro 20mm Forstner bit - https://amzn.to/4eckb8q
Fisch 5mmm lip & spur / brad point bit - https://amzn.to/4aNq9th
Fisch 8mm lip & spur / brad point bit- https://amzn.to/4e6tKFN
KWB Drillblock - https://amzn.to/3V8IhrW
Sleeve bearings 5 x 8 x 16mm - https://amzn.to/3RakGG3
3M strong double-sided tape - https://amzn.to/3x3MBk0
Thin plywood sheets - https://amzn.to/45e2npm
5mm steel dowel pins - https://amzn.to/3Kru3NQ
Tailors’ awl - https://amzn.to/4aBHCVx
Trend GB/US/30 PorterCable style screw-on guide bush - https://amzn.to/3wOPyo1 (US: https://amzn.to/3ICmDqa)")
![Baltic Birch Basics [video 518]](https://i.ytimg.com/vi/GRMpFTuq_V0/hqdefault.jpg "Baltic Birch Basics [video 518]
In this video I take a closer look at the benefits of Birch Plywood, sometimes called ‘Baltic’ Birch. For clarity, I’m British and the Birch plywood available here is generally what our American cousins would refer to as Baltic Birch i.e. thin plywood layers with thicker face veneers, all in Birch throughout. In the UK boards that have only the face veneers in Birch are described as such e.g. ‘Birch-faced Poplar’ or ‘Birch veneered’ plywood.
Most Birch ply sold here is exterior grade 8’ x 4’ sheets, and while interior grade 5’ x 5’ sheets are available they’re typically a special order, and I’ve never actually seen any in 20-odd years in the business.
Interested in the Birch Ply alternatives or how the drawers & runners work out? Subscribe to make sure you don’t miss a thing - http://bit.ly/10MWsubscribe
+++++++++
Become a 10minuteworkshop Plus member and support the channel further - more details at 10minuteworkshop.com, or sign up directly at 10minuteworkshop.plus
Please note that I have moved away from legacy member platforms to concentrate on my own memberships at 10MinuteWorkshop Plus; member benefits at Patreon and YTM will be significantly reduced from October 2022.
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
Other videos of interest:-
Oops! Veneer sanding - https://youtu.be/ojFmNfjaMCA
Cheap or Cheat? I make a cabinet for less cash - https://youtu.be/5oJshwlDVKo
All my ‘Basics’ videos in a playlist here - https://bit.ly/woodworkbasics
Dowel Jig Basics - https://youtu.be/zTj_hiEVfvw
Loose Tenon Basics - https://youtu.be/t86QGUn7dAI
Cabinetry Basics P1 - https://youtu.be/3N_T-YpkBCg
Money, Mouth, Mirka - https://youtu.be/5XDUWQ_Jodo
Ikea Curtain track DIY MFT - https://youtu.be/223QALIbnRc
Workshop cabinets and shelves - https://youtu.be/iaB_CL5md8U
Basic plywood boxes - https://youtu.be/li5AIXw3XPE
New to track saws? Tracksaw workshop & all tracksaw-related videos in a playlist here - http://bit.ly/TracksawWorkshop
+++++++++
Handy consumables & gear:-
I am an associate of Amazon, Benchdogs, Rennie Tools and an eBay Partner Network member; I may earn a commission from qualifying purchases made through these links.
Plywood: A Material Story - https://amzn.to/3Z6gvfO (US; nope, sorry)
Benchdogs. Use offer code 10minuteworkshop at checkout for 5% discount across the board at benchdogs.co.uk
Benchdogs precision rulers (Gifted) - https://benchdogs.co.uk/collections/rulers?ref=1x_p0bagtnr
Bessey DuoKlamp - https://amzn.to/3eDz1Ig (US: https://amzn.to/3w1s1dM)
Festool lever clamp - http://amzn.to/2pOohLD (US: http://amzn.to/2pnFZIM)
Festool Midi extractor - http://amzn.to/2tCIN3Q (US: http://amzn.to/2rKNIOx)
Stainless steel graphics knife, Olfa SAC-1 - https://amzn.to/3DnWzvJ
Polyvine Polyten PVA - https://amzn.to/2EY9Dgf (US(crazy price, just for reference) https://amzn.to/2Tm7RsC)
Tongue depressors (waxing spatulas) - https://amzn.to/2zpHlp8 (US: similar) https://amzn.to/2S1QLP7)
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
+++++++++")
![£5 Fix for the Festool Droop [video 448]](https://i.ytimg.com/vi/Ga46Tdpzod8/hqdefault.jpg "£5 Fix for the Festool Droop [video 448]
You know how it’s the little things that drive you nuts? Well in this video I find a £5 / $5 fix for the extractile dysfunction droop on Festool’s TS55R. Enjoy!
+ + +
I asked in the video if anyone was interested in 3D printing these, and Im happy to say Mike at https://novicewoodworker.com has a version available for sale here:-
https://novicewoodworker.com/shop/festool-track-saw-hose-adapter/
And Nic Gibbens has plans for them for sale (for the folks who want to 3D print their own) on his etsy here:-
https://etsy.me/3ncZxed
Ive seen photos of the adapter mounted on the saw and they look excellent - go and check them out, and thanks so much guys for putting this together so fast!
+ + +
For anyone into their 3D printing, theres a diagram of whats needed here - https://www.dropbox.com/s/d8z2njfphvyc1f3/Vac%20adapter.png?dl=0
Thanks to Karl @StrawbyteWorkshop for the dust cover - https://www.strawbyte.com/merchandise?category=Festool+Accessories
#Festool #Extraction #Fix
++++++++
Other videos mentioned:-
443, Ten Tools I wish I had when I was starting out - https://youtu.be/enmHfvgRTrw
256, The Festool System - https://youtu.be/AHEMSCGspec
211, Shop Vac autostart (Inner tube trick) - https://youtu.be/Qo5kpKMX_Vw
071, Festool cheap tool Tracksaw P1 - https://youtu.be/_8sagpnlF1Q
+++++++++
Become a 10 Minute Workshop YouTube Member for exclusive content - http://bit.ly/10minuteMember
Visit my Patreon channel for exclusive content - http://www.patreon.com/10minuteworkshop
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
If you’re looking for a few gift ideas then take a look at my Etsy store, my Amazon Affiliate store, or any of the links below.
My Etsy - http://bit.ly/10minuteShop
Amazon store - http://bit.ly/10minuteworkshop
My ‘social’ links & contacts in one place - https://www.10minuteworkshop.com/links
Full list of ‘Stuff I use’ at Full list of ‘Stuff I use’ at https://www.10minuteworkshop.com
Connect with me on twitter @10minuteshop
Connect with me on Instagram @10minuteworkshop
+++++++
Heads up; as an Amazon Associate, and an eBay Partner Network member, I earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - https://www.amazon.co.uk/shop/petermillard1
eBay UK - http://bit.ly/Buy_eBay_UK
++++++++
Used/Featured in this video:-
Festool TS55 R Plunge Saw - http://amzn.to/2pGvzDS (US: http://amzn.to/2oOgGhw)
The spare part I used can be found here - http://www.toolsparesonline.com/products/7694-dust-connection.aspx
NB: I found the photographs on the parts page to be a little unclear and ordered the wrong part, initially; it is part #050 that you need.
Other handy gear:-
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Mirock square - https://etsy.me/2MC0RT
Mirock 500mm T-ruler - https://etsy.me/365P0KE
Festool PDC 18/4 - http://amzn.to/2s3J0eq (US: http://amzn.to/2tWUHEL)
Festool T18 drill/driver - https://amzn.to/2QAHpK1 (US: https://amzn.to/2RPuOCR)
Spax screws - http://amzn.to/2oYWydc (US: http://amzn.to/2oOjkDT)
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
+++++++++")
![The Epic Transformation Of Our Kitchen Renovation! [*ad] [video 576]](https://i.ytimg.com/vi/Gd9RVXruLbk/hqdefault.jpg "The Epic Transformation Of Our Kitchen Renovation! [*ad] [video 576]
Click here http://www.hellofresh.co.uk/WORKSHOP60 to enjoy an exclusive offer of 60% off your first box, a 25% discount for the following two months and FREE dessert for life! Alternatively, you can use the code “WORKSHOP60”. This special offer is available for new customers as well as those who cancelled their subscription twelve months ago or more. #AD **Terms and conditions apply, see website for details.
+++++++++
In this one we go back to the very start of our Kitchen extension and ground floor renovation of our #London #Victorian #terrace and take you through the process roughly on the same timeline to present day.
Taking on a build like this? Sign up to the Our Big Build newsletter segment to stay in touch at https://tenminuteworkshop.myflodesk.com/ourbigbuild
+++++++++
Please note that I have moved away from legacy member platforms to concentrate on my own memberships at 10MinuteWorkshop Plus; member benefits at Patreon and YTM have been significantly reduced since October 2022.
+++++++++
Visit the 10MinuteWorkshop store for 10MW Products and project plans, at www.10minute.shop or in the product shelf directly beneath this video.
+++++++++
Heads up; as an Amazon Associate, an eBay Partner Network member, a Trend UK, Benchdogs UK, O3Adhesives and Rennie Tools affiliate, I will earn from qualifying purchases made through these links, and many thanks if you do.
Browse my Amazon store at 10MinuteAmazon.com
Benchdogs. Use offer code 10minuteworkshop at checkout for 5% discount across the board at https://benchdogs.co.uk/?ref=1x_p0bagtnr
+++++++++
Other videos and playlists of interest:-
No going back (Our Big Build primer) - https://youtu.be/eULepp_7CIM
One Smaller Stool [video 576] - https://youtu.be/KDe7ZQO83mE
10MinuteWorkshop Router MultiJig - https://youtu.be/V-K4rnD085o
DIY drilling Guide - https://youtu.be/TglP1kHDjSw
6 Top Tapes - https://youtu.be/zj_IKd8XYNI
DIY SYS-TOTE - https://youtu.be/vhW04TJCgMU
Aircraft grade plywood inserts - https://youtu.be/kA-LswBI_oY
Oak and Birch Ply drawers - https://youtu.be/tIbJ-93TMZw
Sharp and a little bit Scary - https://youtu.be/EBJZlI9IVlI
Bargain or Burden; first look at Wolfcraft ‘MFT’ - https://youtu.be/pqy8IUnLDY4
3 Quick Fixes (Wolfcraft ‘MFT’) - https://youtu.be/3qCU8dzIJ_c
+++++++++
Useful links:
Duo design and architecture - https://duo-architecture.co.uk
Project 1 Design and Build - https://www.project1db.co.uk
Browse the 10MW Everyday Workshop Essentials list here - https://amzn.to/3KLNIaM
Visit my Amazon store here - 10MinuteAmazon.com
Details on planning permission UK - https://www.planningportal.co.uk
Party walls and building works - https://www.gov.uk/party-walls-building-works
RIBA Find an Architect - https://www.architecture.com/working-with-an-architect/how-do-i-find-an-architect
Average building costs estimator - https://buildpartner.com/average-building-costs-per-sq-m-for-2024-a-uk-guide/")
![Mirka Deros Random Orbital Sander [video 406]](https://i.ytimg.com/vi/GxkTdbSXTsc/hqdefault.jpg "Mirka Deros Random Orbital Sander [video 406]
Mirka Deros Random Orbital Sander [video 406]")
![Storage Cubes: A Basic Build. [video 502]](https://i.ytimg.com/vi/Gyv-oGKRF30/hqdefault.jpg "Storage Cubes: A Basic Build. [video 502]
In this longer video I’m back on the Basic Build series and making some simple open storage cubes. Enjoy!
Basic build videos are just that - simply constructed projects from readily available sheet materials using a minimal - and entry-level - toolset, and with each build we add a tool - or two - that grows the scope of the work we can take on.
Open cubes are a bit like building blocks for grown-ups - stack them tall to make a display tower, make them into a low unit for your TV, or step them to make a corner piece, paint them in bright colours for a kids room or have them tone with your decor, they’re a flexible and versatile solution for your changing storage needs.
And it turns out, easy to make with using a minimal toolset, too, with just a little careful application.
Be sure to check out @intelligentfixings channel, and their video on cube construction using the Peanut 2 connector:-
Making mitred cubes with the Peanut 2 - https://www.youtube.com/watch?v=hzRgfhUvaUE
Assembling mitred cubes with the Peanut 2 - https://www.youtube.com/watch?v=UGRSOlkqe4U
+++++++++
Become a 10minuteworkshop Plus member at 10minuteworkshop.plus
Support 10 Minute Workshop as a YouTube Member http://bit.ly/10minuteMember
Support 10 Minute Workshop on Patreon - http://www.patreon.com/10minuteworkshop
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
Other videos of interest:-
Basic Builds playlist - https://bit.ly/BasicBuilds
Peanut 2 System & Projects playlist - https://bit.ly/Peanut2system
Backyard, Budget DIY MFT -https://youtu.be/xIi-I04ocVM
Plywood shelves - https://youtu.be/gNobuRCBr_Q
Little Plywood Boxes - https://youtu.be/qg1jdYy0QTE
Ikea Curtain track DIY MFT - https://youtu.be/223QALIbnRc
DIY MFT follow-on - https://youtu.be/wyGNs1GYdCk
Dave Stanton’s Dog Stop video here - https://www.youtube.com/watch?v=GWcdI5aBB_M
Extrusion Confusion - a guide to MFT hardware - https://youtu.be/za5B-XrSuH0
Parkside or Macallister Plunge Saw? - https://youtu.be/Ebm-EEXNZHE
All my tracksaw-related videos are in a playlist here - http://bit.ly/TracksawWorkshop
New to the MFT or MultiFunction Table? Here’s a couple of explainers:-
Festool MFT - https://youtu.be/0V-p5F7SjO4
MFT follow-on - https://youtu.be/RxcVY8ZR2fQ
+++++++++
Heads up; as an Amazon Associate, an eBay Partner Network member, a Benchdogs and Rennie Tools affiliate, I may earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - https://www.amazon.co.uk/shop/petermillard1
eBay UK - http://bit.ly/Buy_eBay_UK
++++++++
Note that prices fluctuate - some have risen since I made my purchases.
Basic Build toolkit (so far) mentioned in this video:-
Silverline sander - https://amzn.to/3QmUnKs
F clamps from Rutlands, pack of 10 300 x 80mm - I paid about £40 for mine ‘on special’ - https://www.rutlands.com/sp+workholding-f-g-clamps-f-clamps-malleable-cast-iron-f-clamps-malleable-cast-iron-f-clamps-300mm-x-80mm-pack-of-10-rutlands®+r3037x10
Cheap chisels [similar] - https://amzn.to/3NFmCTm (US: [similar] https://amzn.to/386DYZ4)
Twist drill set from Rennie Tools; use the offer code 10MINUTEWORKSHOP for a 5% discount at Rennie Tools - https://www.rennietool.co.uk?aff=2
Corner plates - https://amzn.to/2RopWZy (US: sorry, these seem to be a non-US item, closest I can find is a regular corner bracket - https://amzn.to/2FpLX37)
Lost-tite screws - http://amzn.to/2pGnUFD (US: http://amzn.to/2pVKqa6)
Macallister plunge saw - available in the UK from B&Q stores at diy.com
10.8v drill/driver [similar] - https://amzn.to/3tQAEJ0
20mm conduit - https://www.toolstation.com/20mm-heavy-duty-pvc-round-conduit/p71029
Guiderail connector [similar] - https://tools4trade.co.uk/products/excel-universal-guide-rail-connector
Other handy gear:-
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
+++++++++")
![Benchdogs Quad MFT Hinge System [**Ad/Gifted][video 492]](https://i.ytimg.com/vi/HA52_07sPlk/hqdefault.jpg "Benchdogs Quad MFT Hinge System [**Ad/Gifted][video 492]
In this video I take a quick first look at the new and as yet unreleased Quad #MFT #Rail #Hinge System from Benchdogs. As I mentioned in previous videos it’s hard to believe that there were only two - now three - commercially available rail hinges, so this is a welcome addition from Benchdogs, especially as they take a different approach to the other hinge systems. Enjoy!
NB: this is a pre-production sample, the shipping items will be anodised and laser-etched with all the usual Benchdogs goodness.
** This hardware was supplied for review; I have not been paid to make this video or say nice things about the product; as a Benchdogs.co.uk affiliate I may earn from qualifying sales, so be sure to use the offer code “10MINUTEWORKSHOP” at checkout for a 5% discount across the board at Benchdogs.co.uk, and I’d like to thank Benchdogs for extending that offer.
Pre-order your Benchdogs Quad MFT Hinge here - https://benchdogs.co.uk/products/quad-mft-hinge-system?ref=1x_p0bagtnr
Other videos mentioned:-
MFT Playlist - all my MFT & MFT-related videos in one place - http://bit.ly/MFT-related
Square Cuts: MFT or Rail Square? - https://youtu.be/3C8XSWliOys
Ikea Curtain track DIY MFT - https://youtu.be/223QALIbnRc
Extrusion Confusion - a guide to MFT hardware - https://youtu.be/za5B-XrSuH0
Benchdogs FenceDogs - https://youtu.be/DezSQjhcbbk
Benchdogs fence - https://youtu.be/KXBdxdeM_3Y
Pocket-money Rail Square - https://youtu.be/VaxG6vNF1kY
DIY guiderail stops - https://youtu.be/CHyL_qPgrDc
New to the MFT or MultiFunction Table? Here’s a couple of explainers:-
Festool MFT - https://youtu.be/0V-p5F7SjO4
MFT follow-on - https://youtu.be/RxcVY8ZR2fQ
+++++++++
If you’re looking for a few gift ideas then take a look at my Etsy store, my Amazon Affiliate store, or any of the links below.
My Etsy - http://bit.ly/10minuteShop
Amazon store - http://bit.ly/10minuteworkshop
My ‘social’ links & contacts in one place - https://www.10minuteworkshop.com/links
+++++++
Heads up; as an Amazon Associate, an eBay Partner Network member, and a Benchdogs affiliate, I may earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - https://www.amazon.co.uk/shop/petermillard1
eBay UK - http://bit.ly/Buy_eBay_UK
++++++++
Other handy gear:-
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Benchdogs rail square - https://bit.ly/bench-dogs
Benchdogs precision triangle/square - https://bit.ly/precisiontriangle
Festool PDC 18/4 - http://amzn.to/2s3J0eq (US: http://amzn.to/2tWUHEL)
Festool Domino - http://amzn.to/2pVSnMk (US: http://amzn.to/2o7E22Q)
Bessey DuoKlamp - https://amzn.to/3eDz1Ig (US: https://amzn.to/3w1s1dM)
Festool lever clamp - http://amzn.to/2pOohLD (US: http://amzn.to/2pnFZIM)
Festool MFT - https://amzn.to/2x49HHE (US: https://amzn.to/2J25aKy)
Festool Midi extractor - http://amzn.to/2tCIN3Q (US: http://amzn.to/2rKNIOx)
Festool TS55 Tracksaw - http://amzn.to/2pGvzDS (US: http://amzn.to/2oOgGhw)
Festool T18 drill/driver - https://amzn.to/2QAHpK1 (US: https://amzn.to/2RPuOCR)
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Mirock square - https://etsy.me/2MC0RT
Mirock 500mm T-ruler - https://etsy.me/365P0KE
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
+++++++++")
![Ikea Chair Repair [video 500]](https://i.ytimg.com/vi/HAi_TZYi0Og/hqdefault.jpg "Ikea Chair Repair [video 500]
In this 500th video on my channel, I do something a little different and #repair a £19 #Ikea #chair - because I was asked to! Enjoy!
+++++++++
Become a 10minuteworkshop Plus member at 10minuteworkshop.plus
Support 10 Minute Workshop as a YouTube Member http://bit.ly/10minuteMember
Support 10 Minute Workshop on Patreon - http://www.patreon.com/10minuteworkshop
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
Other popular videos:-
MFT Playlist - all my MFT & MFT-related videos in one place - http://bit.ly/MFT-related
Ikea Curtain-track MFT - https://youtu.be/223QALIbnRc
Backyard, Budget DIY MFT -https://youtu.be/xIi-I04ocVM
Pocket-money Rail Square - https://youtu.be/VaxG6vNF1kY
Tracksaw workshop playlist - http://bit.ly/TracksawWorkshop
Festool or Mafell https://youtu.be/5kqui1b0SbU
Square Cuts: MFT or Rail Square? - https://youtu.be/3C8XSWliOys
+++++++++
If you’re looking for a few gift ideas then take a look at my Etsy store, my Amazon Affiliate store, or any of the links below.
My Etsy - http://bit.ly/10minuteShop
Amazon store - http://bit.ly/10minuteworkshop
My ‘social’ links & contacts in one place - https://www.10minuteworkshop.com/links
+++++++
Heads up; as an Amazon Associate, an eBay Partner Network member, a Benchdogs and Rennie Tools affiliate, I may earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - https://www.amazon.co.uk/shop/petermillard1
eBay UK - http://bit.ly/Buy_eBay_UK
++++++++
Featured/mentioned in this video:-
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Bessey DuoKlamp - https://amzn.to/3eDz1Ig (US: https://amzn.to/3w1s1dM)
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
+++++++++")
![The Triton Duo Doweller is too cheap... [video 523]](https://i.ytimg.com/vi/HFZJuN4EX7I/hqdefault.jpg "The Triton Duo Doweller is too cheap... [video 523]
In this one I’m taking another look at the Triton Duo-Doweller, a hand held joining tool you that seems to be too cheap for what it’s trying to do, and too expensive for what it actually does. Enjoy!
Watch my previously unseen member video on this tool over at 10MinuteWorkshop Plus, more details at 10minuteworkshop.com, or sign up directly at 10minuteworkshop.plus
Full list of individual products used in this video below, or browse my Amazon store at 10MinuteAmazon.com
Join the Amazon Influencer Program here - https://affiliate-program.amazon.co.uk/influencers?referrer=PETER
+++++++++
Become a 10minuteworkshop Plus member and support the channel further - more details at 10minuteworkshop.com, or sign up directly at 10minuteworkshop.plus
Please note that I have moved away from legacy member platforms to concentrate on my own memberships at 10MinuteWorkshop Plus; member benefits at Patreon and YTM will be significantly reduced from October 2022.
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
Other popular videos:-
All my jointing system vids in a playlist here - http://bit.ly/JointingSystems
Domino, Doweller or Zeta?? - https://youtu.be/m78BZHu-uuA
Drawer Cabinet - https://youtu.be/5oJshwlDVKo
Top Drawer! - https://youtu.be/HcNRId9a3Lw
How I fit double extension drawer slides - https://youtu.be/eK8NlFYfUMc
My cheap nailer and compressor - https://youtu.be/eJo3JMkv3JE
Workshop cabinets and shelves - https://youtu.be/iaB_CL5md8U
Basic plywood boxes - https://youtu.be/li5AIXw3XPE
Torsion box Router Bench - https://youtu.be/Q-Vyq4ShHT0
Birch ply drawer router cabinet - https://youtu.be/BfV0426rog0
New to track saws? Tracksaw workshop & all tracksaw-related videos in a playlist here - http://bit.ly/TracksawWorkshop
+++++++++
Heads up; as an Amazon Associate, an eBay Partner Network member, and a Benchdogs UK, O3Adhesives and Rennie Tools affiliate, I may earn from qualifying purchases made through these links, and many thanks if you do.
Note that I use Amazon OneLink - links will open in your local store if available.
Browse the full list for this video here - https://amzn.to/40oVfmm
Browse my ‘Workshop Essentials’ list here - https://amzn.to/3yXZ9GV
Browse my Amazon store here - 10MinuteAmazon.com
Triton Duo Doweller - https://amzn.to/3XzNQyF
8 x 30mm dowels - https://amzn.to/38yb16J (US:[3/8th] https://amzn.to/2KJAKQ5)
Wolfcraft dowel master jig - https://amzn.to/3dt7d9i (US: [similar] https://amzn.to/37tKqXb)
Wolfcraft depth stops - https://amzn.to/3ufYxJp
Use offer code 10minuteworkshop at checkout for 5% discount across the board at benchdogs.co.uk
Benchdogs precision rulers (Gifted without obligation) - https://benchdogs.co.uk/collections/rulers?ref=1x_p0bagtnr
Soft close drawer slides - https://amzn.to/3ZrOvDU (US: [similar] https://amzn.to/3L2vofj)
Bessey DuoKlamp - https://amzn.to/3eDz1Ig (US: https://amzn.to/3w1s1dM)
Festool lever clamp - http://amzn.to/2pOohLD (US: http://amzn.to/2pnFZIM)
Festool Midi extractor - https://amzn.to/42yviCq (US: http://amzn.to/2rKNIOx)
Stainless steel graphics knife, Olfa SAC-1 - https://amzn.to/3DnWzvJ
Polyvine Polyten PVA - https://amzn.to/2EY9Dgf (US(crazy price, just for reference) https://amzn.to/2Tm7RsC)
Tongue depressors (waxing spatulas) - https://amzn.to/2zpHlp8 (US: similar) https://amzn.to/2S1QLP7)
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
+++++++++")
![Top Drawer! [video 519]](https://i.ytimg.com/vi/HcNRId9a3Lw/hqdefault.jpg "Top Drawer! [video 519]
In this one I make a quick & easy inset #drawer in #Birch ply and #Maple veneered ply. Enjoy!
Interested in the duelling duo-dwellers, Birch ply alternatives or how the rest of the drawers & runners work out? Subscribe to make sure you don’t miss a thing - http://bit.ly/10MWsubscribe
I used the Keith Brown @ragnbonebrown Original Oil Wax finish, also available in clear and food safe versions here - https://www.etsy.com/uk/listing/1314398822/kb-oil-wax-wood-finish-triple-pack
AUK router was supplied for lomng-term review by Woodworkers Workshop. I have not been paid to make this video or say nice things about the product, as a WWW affiliate I may earn from qualifying sales; be sure to use the offer code ’10MINUTEWORKSHOP’ with the links below for a 5% discount (valid until December 31st 2022) on these products, and thanks so much to Woodworkers Workshop for extending that offer.
https://woodworkersworkshop.co.uk/auktools-2400w-fixed-base-router-remote-speed-control-and-nvr/?ref=YUDlxZ4f
https://woodworkersworkshop.co.uk/auktools-2400w-fixed-base-router/?ref=YUDlxZ4f
https://woodworkersworkshop.co.uk/auktools-1500w-fixed-base-router/?ref=YUDlxZ4f
+++++++++
Become a 10minuteworkshop Plus member and support the channel further - more details at 10minuteworkshop.com, or sign up directly at 10minuteworkshop.plus
Please note that I have moved away from legacy member platforms to concentrate on my own memberships at 10MinuteWorkshop Plus; member benefits at Patreon and YTM will be significantly reduced from October 2022.
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
Other videos of interest:-
My cheap nailer and compressor - https://youtu.be/eJo3JMkv3JE
Workshop cabinets and shelves - https://youtu.be/iaB_CL5md8U
Basic plywood boxes - https://youtu.be/li5AIXw3XPE
Torsion box Router Bench - https://youtu.be/Q-Vyq4ShHT0
Birch ply drawer router cabinet - https://youtu.be/BfV0426rog0
New to track saws? Tracksaw workshop & all tracksaw-related videos in a playlist here - http://bit.ly/TracksawWorkshop
+++++++++
Handy consumables & gear:-
I am an associate of Amazon, Benchdogs, Rennie Tools and an eBay Partner Network member; I may earn a commission from qualifying purchases made through these links.
Sorry, but I won’t link to the 23g nailer as the whole buying experience was woeful and the bunch of monkeys who sold it don’t deserve anybody’s business.
Hyundai 8-litre quiet compressor - https://amzn.to/398TyB7 (US: nope, sorry)
Silverline 18g nailer - https://amzn.to/3sfcZ2S (US: [similar] https://amzn.to/3rjJR9u)
18g nail mixed pack - https://amzn.to/3lGRIfW (US: [similar] https://amzn.to/3ccvrmW)
Triton Duo Doweller (full review coming soon) - https://amzn.to/3XzNQyF (US: nope, sorry 🤷♂️)
Adjustable cabinet feet - https://amzn.to/3XzQfJH (US: [similar] https://amzn.to/3Xranh6)
Benchdogs. Use offer code 10minuteworkshop at checkout for 5% discount across the board at benchdogs.co.uk
Benchdogs precision rulers (Gifted) - https://benchdogs.co.uk/collections/rulers?ref=1x_p0bagtnr
Bessey DuoKlamp - https://amzn.to/3eDz1Ig (US: https://amzn.to/3w1s1dM)
Festool lever clamp - http://amzn.to/2pOohLD (US: http://amzn.to/2pnFZIM)
Festool Midi extractor - http://amzn.to/2tCIN3Q (US: http://amzn.to/2rKNIOx)
Stainless steel graphics knife, Olfa SAC-1 - https://amzn.to/3DnWzvJ
Polyvine Polyten PVA - https://amzn.to/2EY9Dgf (US(crazy price, just for reference) https://amzn.to/2Tm7RsC)
Tongue depressors (waxing spatulas) - https://amzn.to/2zpHlp8 (US: similar) https://amzn.to/2S1QLP7)
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
+++++++++")
