Teaching Tech | Setting up the ultimate home makerspace! - Moving house and custom parts @TeachingTech | Uploaded 2 years ago | Updated 2 days ago
Moving house is a pain. It’s particularly a pain when you have a vast collection of 3D printers and other manufacturing equipment, it gets a lot harder. In this video I take you through my move, but focus mainly on setting everything up to be the ultimate home makerspace. This includes custom 3D printed and laser cut parts.
Please leave feedback on the new studio and camera angle. The microphone is closer so I think the audio is better. However, I think I need a bit more light on my face and maybe less on the back wall to let the RGB lights stand out more.
Some people wanted links to some of the items shown:
Spotlight mount (lights tab then right click on parts to export in a format of your choice): cad.onshape.com/documents/ac393862aa54c195cb5ff6d4/w/65dc475aab32f669ef72cf6a/e/0ba35379ddc1c3dbb9aa6c65?renderMode=0&uiState=62d4913deeb63c5fb12351aa
Rack-it mallet together shelving I use for benches and table: https://www.bunnings.com.au/brands/r/rack-it
Timber panels for benches: https://www.bunnings.com.au/2200-x-600-x-26mm-acacia-solid-oiled-hardwood-project-panel_p8330032
0:00 Introduction
0:39 Old vs new house
2:46 Moving equipment
4:02 Resin printing area
Previous resin printing guide video: youtu.be/UU6tWhV010M
5:55 Walk in storage room
7:15 New laser cut storage drawers
10:44 Finishing touches
11:44 Still to do
Buy quality and affordable filament from X3D. Buy 3, get 1 free and a free sample pack with every order: www.x3d.com.au
Get Quality Resins from 3D Printers Online. 5% off storewide for Teaching Tech subscribers [Code: tech5]
https://3dprintersonline.com.au/
Take a look around and if you like what you see, please subscribe.
Support me on Patreon: http://www.patreon.com/teachingtech
Moving house is a pain. It’s particularly a pain when you have a vast collection of 3D printers and other manufacturing equipment, it gets a lot harder. In this video I take you through my move, but focus mainly on setting everything up to be the ultimate home makerspace. This includes custom 3D printed and laser cut parts.
Please leave feedback on the new studio and camera angle. The microphone is closer so I think the audio is better. However, I think I need a bit more light on my face and maybe less on the back wall to let the RGB lights stand out more.
Some people wanted links to some of the items shown:
Spotlight mount (lights tab then right click on parts to export in a format of your choice): cad.onshape.com/documents/ac393862aa54c195cb5ff6d4/w/65dc475aab32f669ef72cf6a/e/0ba35379ddc1c3dbb9aa6c65?renderMode=0&uiState=62d4913deeb63c5fb12351aa
Rack-it mallet together shelving I use for benches and table: https://www.bunnings.com.au/brands/r/rack-it
Timber panels for benches: https://www.bunnings.com.au/2200-x-600-x-26mm-acacia-solid-oiled-hardwood-project-panel_p8330032
0:00 Introduction
0:39 Old vs new house
2:46 Moving equipment
4:02 Resin printing area
Previous resin printing guide video: youtu.be/UU6tWhV010M
5:55 Walk in storage room
7:15 New laser cut storage drawers
10:44 Finishing touches
11:44 Still to do
Buy quality and affordable filament from X3D. Buy 3, get 1 free and a free sample pack with every order: www.x3d.com.au
Get Quality Resins from 3D Printers Online. 5% off storewide for Teaching Tech subscribers [Code: tech5]
https://3dprintersonline.com.au/
Take a look around and if you like what you see, please subscribe.
Support me on Patreon: http://www.patreon.com/teachingtech
