SDRuno scanning 20m example clip1 of 3 @SDRplayRSP
SDRuno scanning 20m example clip1 of 3  @SDRplayRSP
Uploaded November 2021 | Updated November 2026, 1 day ago
This is clip 1 of a 3 part demo showing how you can scan an HF band looking for activity.

This is a winter morning daytime recording made in the UK. There are 3 unedited clips, showing how varying the SDRuno scanner settings for signal threshold level and step size will vary the results:

This first clip shows the setting of the start/stop frequency in the scanner config panel and setting it going on 20m with quite a high threshold setting (SDRuno remains tuned to prior settings - in this case an HF broadcast frequency, until you set the scanner running)

Go to clip 2 to see a demo using a slightly lower threshold:

youtu.be/tB6qdrdPaGk

and finally - tweaking the step size:

youtu.be/v3AqYqmwEto

With trial and error you can have some real fun. You could leave it running on a usually dead band and just have audio alert you to the fact that there's sudden activity!

Because SDRuno has the scanner integrated (unlike most other SDR software) then it's definitely a great place to start.

The recordings were made using an RSPdx - click here for more information: sdrplay.com/rspdx

This is one of many video guides from SDRplay - makers of the RSP family of SDR radios. See the full list of SDRplay videos and applications documents on: sdrplay.com/apps-catalogue

The RSP family of SDRs from SDRplay cover 1kHz to 2 GHz with no gaps and give up to 10MHz spectrum visibility.

SDRplay is a UK company. The RSP SDR receivers are made in the UK and can be purchased for worldwide delivery directly from sdrplay.com (click on purchase and select your country to view shipping costs) or you can buy from any of our worldwide resellers listed here: sdrplay.com/distributors Many of the resellers offer local free shipping and/or local language technical support.

The SDRplay YouTube Channel is: youtube.com/c/SDRplayRSP
SDRuno scanning 20m example clip1 of 3Grimeton SAQ 17.2kHz signal on RSPdxSDRplay at Hamvention 2026SDRplay: Using SBCs/Tablets/AndroidA thank you to Claude F0ELA for his SDRplay support in FranceSDRplay - Using the RSPduo with SDRconnect (VID638)SDRuno v1.2- What changed in Version 1.2SDRplay dump1090 Webinar Stream 1 of 2SDRplay Raspberry Pi3 setup for RSPSDRconnect, nRSP into MultiPSK decoding APRSSDRplay MAC UPDATESDRplay Panadapter Webinar
SDRplay Software Defined Radio Receiver |

SDRuno scanning 20m example clip1 of 3

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER