Uploaded July 2017 | Updated November 2026, 3 hours ago
See the newer video: youtu.be/qXThS1XszhQ
Demonstrating how to set up an SDRplay RSP with a Raspberry Pi3
Items used in this demo:
Raspberry Pi3 with at least 8GB SD micro card
GorillaPi SupaVent Series V1 Raspberry Pi 3 & Raspberry Pi 2 Case Model B (and B+) & Fan + Heatsink Pack
SDRplay RSP1 SDR radio receiver
10m+ length of wire outdoor antenna (for short-wave and local VHF reception)
USB-B cable
HDMI Cable
USB Keyboard and Mouse
HDMI monitor with speakers
Access to the internet during setup
The April 7th 2018 updated dated link for downloading the SD card image instructions is sdrplay.com/community/viewtopic.php?f=6&t=3134 - this version supports the new Model B+.
For more SDRplay videos go to youtube.com/c/SDRplayRSP
To buy an SDRplay RSP - go to sdrplay.com/purchase or see our list of distributors and resellers on sdrplay.com/distis.php
Or buy your Raspberry Pi3 and SDRplay RSP together from RS Components (Google "RS Components SDRplay", or "RS Components Raspberry Pi")
Note: for those wanting to use other SBC devices, you might want to try out the Odroid-C2 as with full Gigabit Ethernet support - I could get 10 MHz bandwidth remotely using SoapyRemote to my PC pretty easily. Low CPU load as well. It does need some forced air cooling in our opinion
See the newer video: youtu.be/qXThS1XszhQ
Demonstrating how to set up an SDRplay RSP with a Raspberry Pi3
Items used in this demo:
Raspberry Pi3 with at least 8GB SD micro card
GorillaPi SupaVent Series V1 Raspberry Pi 3 & Raspberry Pi 2 Case Model B (and B+) & Fan + Heatsink Pack
SDRplay RSP1 SDR radio receiver
10m+ length of wire outdoor antenna (for short-wave and local VHF reception)
USB-B cable
HDMI Cable
USB Keyboard and Mouse
HDMI monitor with speakers
Access to the internet during setup
The April 7th 2018 updated dated link for downloading the SD card image instructions is sdrplay.com/community/viewtopic.php?f=6&t=3134 - this version supports the new Model B+.
For more SDRplay videos go to youtube.com/c/SDRplayRSP
To buy an SDRplay RSP - go to sdrplay.com/purchase or see our list of distributors and resellers on sdrplay.com/distis.php
Or buy your Raspberry Pi3 and SDRplay RSP together from RS Components (Google "RS Components SDRplay", or "RS Components Raspberry Pi")
Note: for those wanting to use other SBC devices, you might want to try out the Odroid-C2 as with full Gigabit Ethernet support - I could get 10 MHz bandwidth remotely using SoapyRemote to my PC pretty easily. Low CPU load as well. It does need some forced air cooling in our opinion










