Uploaded May 2016 | Updated November 2026, 3 hours ago
When recording to multi-track tape, engineers generally keep track sheets that indicate what's recorded on each track. These are invaluable, since with analog tape, waveforms are not displayed and there's no other way of determining if something is occupying that particular area on the tape (other than watching the VU meters). Track sheets can be helpful, not only to know what has been recorded and exactly where, but also to know what tracks were open (meaning they contain no audio and are available for recording).
The engineers would also transfer the information from the track sheet and generally write it on a strip of white write-on tape on the console above or below each fader. That way, the engineer could simply look at the console and know what sound was being routed through what fader without having to keep referring to the track sheet. This information, when written on the console is called a scribble-strip.
Today both consoles and control surfaces often have digital scribble strips that automatically show the information electronically using an LED display. This can be very handy with non-linear workstations, since the tracks and channels can change position relative to one and other, and the scribble-strips help engineers know what particular sound they're controlling.
When recording to multi-track tape, engineers generally keep track sheets that indicate what's recorded on each track. These are invaluable, since with analog tape, waveforms are not displayed and there's no other way of determining if something is occupying that particular area on the tape (other than watching the VU meters). Track sheets can be helpful, not only to know what has been recorded and exactly where, but also to know what tracks were open (meaning they contain no audio and are available for recording).
The engineers would also transfer the information from the track sheet and generally write it on a strip of white write-on tape on the console above or below each fader. That way, the engineer could simply look at the console and know what sound was being routed through what fader without having to keep referring to the track sheet. This information, when written on the console is called a scribble-strip.
Today both consoles and control surfaces often have digital scribble strips that automatically show the information electronically using an LED display. This can be very handy with non-linear workstations, since the tracks and channels can change position relative to one and other, and the scribble-strips help engineers know what particular sound they're controlling.










