Uploaded May 2016 | Updated November 2026, 3 hours ago
Digital sampling was introduced around 1980 by Fairlight, an Australian digital instrument manufacturer, New England Digital, the makers of the Synclavier, the French company Publison, that had a sampling device, that was essentially a digital delay that could capture a short incoming signal and then modulate the pitch with a keyboard, and Roger Linn, who had just introduced the LM-1, the first sampling drum machine. Although, Linn's device could only playback pre-recorded sounds, unlike the others that could actually capture samples.
However, since this was cutting edge technology, the unit cost of all of the samplers was very expensive, generally in the $100,000 range. For example, the price for just one meg of RAM for the Synclavier was $10,000.
Dave Rossum, the co-founder and master engineer for the musical instrument company E-Mu, had just developed some of the first scanne d polyphonic keyboards for synths, and had licensed that technology to other synth manufacturers like Oberheim and Sequential Circuits. Rossum was impressed with digital sampling and felt that if it could be done affordably, it would be an industry game-changer.
The big issue was the cost of the RAM, the memory chips that loaded and played the samples. Companies like Fairlight had used a different memory subsystem for each sound, which dramatically increased the cost. Rossum found a direct memory access chip that would be fast enough to handle multiple notes from one memory chip. By using five chips, he was able to simultaneously play eight notes. Rossum never patented the memory sharing that he developed, although it's the basis for all samplers that were developed after his.
Rossum called his sampler "The Emulator", which cleverly incorporated E-Mu into the name. It was available in both four-voice and an eight-voice models. They could capture up to 17 seconds of sounds. Each sample was fixed at 2 seconds in length, but it could be looped to play longer, and was limited to just 8-Bit resolution. Because of these constraints, Emulators only needed 128 K of RAM, keeping the cost to just under $10,000, which compared to other available samplers was very affordable.
Digital sampling was introduced around 1980 by Fairlight, an Australian digital instrument manufacturer, New England Digital, the makers of the Synclavier, the French company Publison, that had a sampling device, that was essentially a digital delay that could capture a short incoming signal and then modulate the pitch with a keyboard, and Roger Linn, who had just introduced the LM-1, the first sampling drum machine. Although, Linn's device could only playback pre-recorded sounds, unlike the others that could actually capture samples.
However, since this was cutting edge technology, the unit cost of all of the samplers was very expensive, generally in the $100,000 range. For example, the price for just one meg of RAM for the Synclavier was $10,000.
Dave Rossum, the co-founder and master engineer for the musical instrument company E-Mu, had just developed some of the first scanne d polyphonic keyboards for synths, and had licensed that technology to other synth manufacturers like Oberheim and Sequential Circuits. Rossum was impressed with digital sampling and felt that if it could be done affordably, it would be an industry game-changer.
The big issue was the cost of the RAM, the memory chips that loaded and played the samples. Companies like Fairlight had used a different memory subsystem for each sound, which dramatically increased the cost. Rossum found a direct memory access chip that would be fast enough to handle multiple notes from one memory chip. By using five chips, he was able to simultaneously play eight notes. Rossum never patented the memory sharing that he developed, although it's the basis for all samplers that were developed after his.
Rossum called his sampler "The Emulator", which cleverly incorporated E-Mu into the name. It was available in both four-voice and an eight-voice models. They could capture up to 17 seconds of sounds. Each sample was fixed at 2 seconds in length, but it could be looped to play longer, and was limited to just 8-Bit resolution. Because of these constraints, Emulators only needed 128 K of RAM, keeping the cost to just under $10,000, which compared to other available samplers was very affordable.










