Uploaded September 2021 | Updated November 2026, 4 hours ago
This Cessna is a very unique RC model which exist only once in the world.
The building took five years for Dieter Deyerler until this beauty lifted up to the sky for the very first time.
Model data:
Scale: 1/3.5
Span: 124" / 3.14 m
Length: 97" / 2.46 m
Weight: 45 pounds / 20.2 kg
Engine: DLE 111
Pictures of the construction / Bilder zum Bau ... flickr.com/photos/80143796@N07/albums/72157719890419421
Dieter said: "I had this plan and of course a few hundred detailed pictures of the original that I took at Hahnweide 2011. I did the construction, static and aerodynamic design myself. I built everything myself, the model, the silencers, all shapes for the spinner, bonnet, landing gear, wheel fairing, tail wheel fork, rear fuselage tip and I painted everything myself."
Dieter sagte: "Ich hatte diesen Plan und nätürlich ein paar hundert Detailbilder vom Original, die ich auf der Hahnweide 2011 gemacht habe. Konstruktion, statische und aerodynamische Auslegung habe ich selbst gemacht. Ich habe alles selbst gebaut, das Modell, die Schalldämpfer, alle Formen für Spinner, Motorhaube, Fahrwerk, Radverkleidung, Heckradgabel, Rumpfspitze hinten und habe alles selbst lackiert."
This Cessna is a very unique RC model which exist only once in the world.
The building took five years for Dieter Deyerler until this beauty lifted up to the sky for the very first time.
Model data:
Scale: 1/3.5
Span: 124" / 3.14 m
Length: 97" / 2.46 m
Weight: 45 pounds / 20.2 kg
Engine: DLE 111
Pictures of the construction / Bilder zum Bau ... flickr.com/photos/80143796@N07/albums/72157719890419421
Dieter said: "I had this plan and of course a few hundred detailed pictures of the original that I took at Hahnweide 2011. I did the construction, static and aerodynamic design myself. I built everything myself, the model, the silencers, all shapes for the spinner, bonnet, landing gear, wheel fairing, tail wheel fork, rear fuselage tip and I painted everything myself."
Dieter sagte: "Ich hatte diesen Plan und nätürlich ein paar hundert Detailbilder vom Original, die ich auf der Hahnweide 2011 gemacht habe. Konstruktion, statische und aerodynamische Auslegung habe ich selbst gemacht. Ich habe alles selbst gebaut, das Modell, die Schalldämpfer, alle Formen für Spinner, Motorhaube, Fahrwerk, Radverkleidung, Heckradgabel, Rumpfspitze hinten und habe alles selbst lackiert."






![RC CIRRUS K2 - PYRO-GLIDER WESTON PARK [UK]
Mario Müller shows a fantastic aerobatic performance at the Weston Park Model Airshow 2019
Model data:
Cirrus K2
Span: 5.5 m / 217
Lenght: 2.5 m / 98
Weight: 18.5 kg / 40.8 pouns (with 2 liters of fuel)
Turbine: JetCat P180
Servos: SAVÖX
Base Log: PowerBox
Wings made by DG- Flugmodellbautechnik
PYRO-GLIDER
Website ... http://www.pyroglider.com
Facebook ... https://www.facebook.com/Pyroglider-Airshows-104243434292023/ RC CIRRUS K2 - PYRO-GLIDER WESTON PARK [UK]](https://i.ytimg.com/vi/r1HmI-hl7fU/mqdefault.jpg)


![Unique RC Rutan Boomerang [Scale 1/3.5]
Gerhard Grambow flies his unique Rutan Model 202 Boomerang at the HORIZON AIRMEET 2024
Model data:
Scale: 1/3.5
Wingspan: 3.2 m / 125.9 inches
Length: 2.67 mm / 105.1 inches
Engines: 2 x Saito FG 57 TS four-stroke boxer
Weight: 24.7 kg / 54.5 pounds
Model construction:
- Fuselages, cowlings, tips, vertical stabilizer in 3-D printing, mold making and composite construction
- Wings and horizontal stabilizers in styrodur, carbon, abachi
Design: Erwin Schmelzer
Construction: Erwin Schmelzer, Gerhard Grambow
Club: MFG Ramelsloh e.V.
The construction time was two and a half years, but with a few interruptions. It is difficult to estimate the time required, but it was around 700 hours each time.
Only a three-sided view and many photos from the Internet were available for the construction. The three-sided view was, however, very high quality and was created by the current operator of the Boomerang, Tres Clement. Tres is a former employee of Burt and helped build the Boomerang 28 years ago.
The CAD data from Tres has now arrived. Unfortunately a little too late. This data would have saved Erwin several weeks of work.
Special features:
This model is, like the original, the only existing aircraft of this type.
Fertigung:
- Rümpfe, Cowlings, Tips, Seitenleitwerk in 3-D Druck, Formenbau und Composite-Bauweise
- Tragflächen und Höhenleitwerke in Styrodur, Kohlefaser, Abachi
Konstruktion: Erwin Schmelzer
Bau: Erwin Schmelzer, Gerhard Grambow
Verein: MFG Ramelsloh e.V.
Die Bauzeit betrug zweieinhalb Jahre aber mit einigen Unterbrechungen. Der Zeitaufwand ist schwer abzuschätzen, aber es waren jeweils circa 700 Stunden.
Zum Bau waren nur eine drei Seiten Ansicht und viele Fotos aus dem Internet vorhanden. Die drei Seiten Ansicht war allerdings sehr hochwertig und von dem heutigen Betreiber des Boomerang, Tres Clement erstellt. Tres ist ein früherer Mitarbeiter von Burt und hat den Boomerang vor 28 Jahren mit gebaut.
Mittlerweile sind die CAD Daten von Tres eingetroffen. Leider etwas zu spät. Diese Daten hätten Erwin einige Wochen an Arbeit erspart.
Besonderheiten:
Dieses Modell ist, wie auch das Original, das einzig existierende Flugzeug dieses Typs. Unique RC Rutan Boomerang [Scale 1/3.5]](https://i.ytimg.com/vi/rsBcd6bRLHs/mqdefault.jpg)
