Uploaded September 2019 | Updated November 2026, 4 hours ago
This is the second of totally three Junkers Ju-188 ready for maiden.
Finally, after 8 years of planning and building this awesome work of art, it was time of getting it airborne.
Builder & Owner: Adolf (Adi) Leopold
Model data: Scale 1/4
Wingspan: 5.5m (18 ft)
Weight: ~ 85 Kg (187 pounds)
Engine: 2x Moki 250cc
Kit: Self made (8 years of building)
This project is one of three models of Ju-188 at the same modellers club. The weathering has be done by Klaus Herold, who is an expert in painting and weathering WW2 Rc planes.
---- MORE DETAILS ----
Wings Span 5.5 m (18ft)
Area 3.2 m² (3.6 ft²)
Depth at gondola 160 cm (63")
Motor hoods diameter 33 cm (13")
Elevator Span 195 cm (76.8"')
Area 0,672 m² (7.5 ft²)
Rudder Height from the ground 105 cm (41")
Fuselage Length 383 cm (12½ ft)
Height at canopy 102 cm (40.1")
Landing gear Immersion tube diameter 70 mm (2.76")
Weight 6200 grams incl. wheel (13.7 pounds)
Length (pivot point / axis) 39 cm (15.4")
Suspension control Festo air cylinder 35 mm diameter (1.8")
Air tank 1 liter per side (9 bar)
Wheels Diameter 29 cm (11.4")
Width 9.5 cm (3.74")
Brakes 70 mm drum brakes (27.6")
Propellers 30.7" 3 blade Ramoser ( ramoser.de )
Engines Moki 250 without pump
Cockpit details: youtu.be/THWkgELldG8
Enjoy watching !!!
This is the second of totally three Junkers Ju-188 ready for maiden.
Finally, after 8 years of planning and building this awesome work of art, it was time of getting it airborne.
Builder & Owner: Adolf (Adi) Leopold
Model data: Scale 1/4
Wingspan: 5.5m (18 ft)
Weight: ~ 85 Kg (187 pounds)
Engine: 2x Moki 250cc
Kit: Self made (8 years of building)
This project is one of three models of Ju-188 at the same modellers club. The weathering has be done by Klaus Herold, who is an expert in painting and weathering WW2 Rc planes.
---- MORE DETAILS ----
Wings Span 5.5 m (18ft)
Area 3.2 m² (3.6 ft²)
Depth at gondola 160 cm (63")
Motor hoods diameter 33 cm (13")
Elevator Span 195 cm (76.8"')
Area 0,672 m² (7.5 ft²)
Rudder Height from the ground 105 cm (41")
Fuselage Length 383 cm (12½ ft)
Height at canopy 102 cm (40.1")
Landing gear Immersion tube diameter 70 mm (2.76")
Weight 6200 grams incl. wheel (13.7 pounds)
Length (pivot point / axis) 39 cm (15.4")
Suspension control Festo air cylinder 35 mm diameter (1.8")
Air tank 1 liter per side (9 bar)
Wheels Diameter 29 cm (11.4")
Width 9.5 cm (3.74")
Brakes 70 mm drum brakes (27.6")
Propellers 30.7" 3 blade Ramoser ( ramoser.de )
Engines Moki 250 without pump
Cockpit details: youtu.be/THWkgELldG8
Enjoy watching !!!


![RC CIRRUS K2 - PYRO-GLIDER WESTON PARK [UK]
Mario Müller shows a fantastic aerobatic performance at the Weston Park Model Airshow 2019
Model data:
Cirrus K2
Span: 5.5 m / 217
Lenght: 2.5 m / 98
Weight: 18.5 kg / 40.8 pouns (with 2 liters of fuel)
Turbine: JetCat P180
Servos: SAVÖX
Base Log: PowerBox
Wings made by DG- Flugmodellbautechnik
PYRO-GLIDER
Website ... http://www.pyroglider.com
Facebook ... https://www.facebook.com/Pyroglider-Airshows-104243434292023/ RC CIRRUS K2 - PYRO-GLIDER WESTON PARK [UK]](https://i.ytimg.com/vi/r1HmI-hl7fU/mqdefault.jpg)


![Unique RC Rutan Boomerang [Scale 1/3.5]
Gerhard Grambow flies his unique Rutan Model 202 Boomerang at the HORIZON AIRMEET 2024
Model data:
Scale: 1/3.5
Wingspan: 3.2 m / 125.9 inches
Length: 2.67 mm / 105.1 inches
Engines: 2 x Saito FG 57 TS four-stroke boxer
Weight: 24.7 kg / 54.5 pounds
Model construction:
- Fuselages, cowlings, tips, vertical stabilizer in 3-D printing, mold making and composite construction
- Wings and horizontal stabilizers in styrodur, carbon, abachi
Design: Erwin Schmelzer
Construction: Erwin Schmelzer, Gerhard Grambow
Club: MFG Ramelsloh e.V.
The construction time was two and a half years, but with a few interruptions. It is difficult to estimate the time required, but it was around 700 hours each time.
Only a three-sided view and many photos from the Internet were available for the construction. The three-sided view was, however, very high quality and was created by the current operator of the Boomerang, Tres Clement. Tres is a former employee of Burt and helped build the Boomerang 28 years ago.
The CAD data from Tres has now arrived. Unfortunately a little too late. This data would have saved Erwin several weeks of work.
Special features:
This model is, like the original, the only existing aircraft of this type.
Fertigung:
- Rümpfe, Cowlings, Tips, Seitenleitwerk in 3-D Druck, Formenbau und Composite-Bauweise
- Tragflächen und Höhenleitwerke in Styrodur, Kohlefaser, Abachi
Konstruktion: Erwin Schmelzer
Bau: Erwin Schmelzer, Gerhard Grambow
Verein: MFG Ramelsloh e.V.
Die Bauzeit betrug zweieinhalb Jahre aber mit einigen Unterbrechungen. Der Zeitaufwand ist schwer abzuschätzen, aber es waren jeweils circa 700 Stunden.
Zum Bau waren nur eine drei Seiten Ansicht und viele Fotos aus dem Internet vorhanden. Die drei Seiten Ansicht war allerdings sehr hochwertig und von dem heutigen Betreiber des Boomerang, Tres Clement erstellt. Tres ist ein früherer Mitarbeiter von Burt und hat den Boomerang vor 28 Jahren mit gebaut.
Mittlerweile sind die CAD Daten von Tres eingetroffen. Leider etwas zu spät. Diese Daten hätten Erwin einige Wochen an Arbeit erspart.
Besonderheiten:
Dieses Modell ist, wie auch das Original, das einzig existierende Flugzeug dieses Typs. Unique RC Rutan Boomerang [Scale 1/3.5]](https://i.ytimg.com/vi/rsBcd6bRLHs/mqdefault.jpg)




