FOB Scale Modellbau
Cockpit Ju188
updated
Ich habe versucht meine 300mm Räder selbst zu bauen imnd das unter 500 Gramm.
hier gehts zu meiner HP
fob-scale.com
Whatever you want to call these fat tires, Bushweel, Tundra Tires or Balloon Tires. They are either very expensive or very heavy.
I tried to build my own 300mm wheels and they were under 500 grams.
Im nächsten Teil zeige ich euch dann die Herstellung der Bushweels.
hier gehts zu meiner Webpage
fob-scale.com
This part is about building the tail gear, from laminating the CFK to the wheel struts. Then the main Gear is built, it has to be light, stable and cheap, it is a complete self-made construction.
In the next part I will show you how to build the bushweels.
https://www.hausundwerkstatt24.de/WIG-TIG-Schweissgeraete
hier gehts zu meiner Webseite
fob-scale.com
Es gibt nur ganz wenige Schwachstellen die wir ändern müssen.
Im ersten Teil gibt es den Lieferzustand und alles was dabei ist.
Im mittleren Teil gibt es ein paar Umbauten, einschließlich der aufbau des Zimmermann Schalldämpfers und am Ende läuft der Motor auf dem Prüfstand.
Fiala 120B2 oder Valach 120B2
hier gehts zu meiner Webpage.
www.fob-scale.com
In this video we take a detailed look at the Fiala 120 4-stroke boxer.
There are only a few weak points that we need to change.
The first part shows the delivery state and everything that is included.
In the middle part there are a few modifications, including the installation of the Zimmermann silencer and at the end the engine runs on the test bench.
Es sollte eine Low Cost Form werden !
hier gehts zu meiner Webseite
www.fob-scale.com
In this clip I describe four steps of planning a hood for my model, from the drawing to the master model, to the negative mold to the finished hood, step by step
ich mich entschlossen einen weiteren Teil zu machen.
Allerdings werden wir uns im nächsten Teil mit der Motorhaube und Formenbau beschäftigen.
gezeichnet wurde alles in Rhino Ceros
Die Fräse ist eine EAS 600
Die Frässoftware ust von StepFour
hier gehts zu meiner Webseite
www.fob-scale.com
A new model is being created, part 3.1 is about the hull construction, from planning to realization with many frames, a small slipway and hull bracing. Since I am currently in a phase where there are a lot of things to plan and the video is getting too confusing and too long, I decided to make another part.
I decided to make another part.
However, in the next part we will deal with the engine cowling and mold making.
Wieder verwende ich Hartschaumplatten, wie auch bei den Tragflächen, allerdings wird dies alles CNC gefräst. Mit dieser Methode gibt es sehr leichte Bauteile die sehr schnell gefertigt sind.
hier gehts zu meiner Webseite
www.fob-scale.com
Part 2 continues with the construction of a new model.
Again I use sheets of hard foam, as with the wings, but this is all CNC milled. This method results in very light components that are produced very quickly.
Viel Spaß mit dem ersten Teil.
Sorry für den kurzen Tonausfall und einige Wiederholungen im Video, es wird sich bessern :-)
hier gehts zu meiner Webseite
www.fob-scale.com
This is the first video in a series in which I want to show the creation of an RC model. Episode 1 is about wing construction in laser construction, so no ribs made of wood but in hard foam. This time it wasn't supposed to be a scale machine, but everything free without a plan etc. The look is like a Piper or Zlin Bobber but all freestyle, so my model will be a Fobber 4.0. With a wingspan of more than 4 meters and equipped with a Valach 120 Boxer 4 stroke engine. RC will be from Jeti.
Have fun with the first part.
Sorry for the short loss of sound and some repetitions in the video, it will get better :-)
Für den Einsteiger
In this clip I would like to show my procedure for cutting styrofoam surfaces. Starting with the tools to cutting the basic shape and the use of cutting templates, completely without CNC.
for beginner
hier gehts zu meiner Webseite
www.fob-scale.com
Tischbohrmaschine TBH
Kapp und Gehrungssäge KGS80
Feinschnitt Tischkreissäge FET
Proxxon
Bandschleifer BS/E
Eckenschleifer OZI/E
MICRO-Cutter MIC
Blockbandschleifer BBS/S
In Teil 1 geht es um:
Langhals-Bohrschleifer LBS/E
Langhals-Winkelschleifer LHW
Industrie-Bohrschleifer IBS/E
Langhals-Winkelbohrmaschine LWB/E
sowie Zubehör von Proxxon
In this clip I would like to share my experiences with Proxxon tools with you. What is a must have for me and what could I do without.
Part 1 is about:
mehr dazu auf meiner HP
fob-scale.com
Diese stelle ich hier bei meiner Junkers ein.
In model making, there is always the challenge of needing lightweight sheet material with smooth surfaces. Unfortunately, there is not really much choice on the market. In the viedeo I would like to show you how you can produce light plates with the simplest means and what is light and cheap in the end.
Trennwachs
https://www.r-g.de/art/165100
Gelcoat
https://www.r-g.de/art/120100
Glasgewebe
https://www.r-g.de/art/190110-PA-100
Aramid Waben
https://www.r-g.de/art/500098-Aero
Hier geht es zu meiner Webseite: fob-scale.com
with this Cip I turn to the Moki Fan's all the same whether 180, 250 or 300er. There are not many reasons why such an engine dies, many things you can perhaps avoid. I hope that for one or the other what is there.
Moki Kühlung
fob-scale.com/kuehlung_moki
Zündschalter
hacker-motor-shop.com/dpsi-micro-rcs-fernsteuerschalter.htm?SessionId=&a=article&ProdNr=A11065&p=10133
mit Reduzierung auf 5,5 V
hacker-motor-shop.com/dpsi-micro-rcs-rv-fernsteuerschalter.htm?SessionId=&a=article&ProdNr=A11070&p=10133
Akkus, verschiedene Varianten
hacker-motor-shop.com/Akkus-und-Akkuzubehoer/Empfaengerakkus/Lithium-Ionen-Akkus/2S-LiIon-Akku-6000mAh-Long-15A.htm?SessionId=&a=article&ProdNr=A43067&p=10188
Long search for usable outdoor shower enclosure that can be mounted quickly and everywhere was unsuccessful. So I had to construct something myself for little money and easy to assemble. The second problem for many is the hot water preparation, also here I present a low cost version.
Hier geht es zu meiner Webseite: fob-scale.com
After pressing the parts, the whole electrically retractable tail wheel must still be mounted
Hier geht es zu meiner Webseite: fob-scale.com
Lagerung von den Ersatzteilen bis zum Werkzeug, wie auch die Elektrik usw.
Hier geht es zu meiner Webseite: fob-scale.com
Hier geht es zu meiner Webseite: fob-scale.com
Part 2 is about the extension of the trailer, many details how I accommodate the model airplanes, as well as an enlargement of the interior.
Storage from the spare parts to the tools, as well as the electrics, etc.
Handhebelpresse und Matritze.
The pressed part from Part 1 is now used to create a triangular control arm with the aid of the
hand lever press and die.
Erstellen von Matritzen mit einfachsten Mitteln, Hier der erste Teil
The pressing of sheet metal parts with a simple hand lever press.
Creating dies with the simplest means, Here is the first part.
Hier geht es zu meiner Webseite: fob-scale.com
Im Ersten Teil geht es um den Aufbau eines Neuen Trailers, was, wie und warum?
In den nächsten Teilen wird es um den Ausbau und den Goodies gehen.
Ich könnte mir auch vorstellen einen Wohnanhänger in dieser Art aufzubauen.
Build your trailer the way you need it!
The first part is about building a new trailer, what, how and why?
In the next parts it will be about the expansion and the goodies.
I could also imagine to build a trailer in this way.
Hier geht es zu meiner Webseite: fob-scale.com
Hier geht es zu meiner Webseite: fob-scale.com
Diese Teile habe ich verwendet
https://www.amazon.de/dp/B01NGTI93E?ref=ppx_yo2ov_dt_b_product_details&th=1
https://www.amazon.de/dp/B002X6XXV2?psc=1&ref=ppx_yo2ov_dt_b_product_details
https://www.amazon.de/dp/B079V26KQ5?psc=1&ref=ppx_yo2ov_dt_b_product_details
Aber jetzt habe ich einen einfachen DIY Weg gefunden, so einen Rohrbieger selbst zu bauen.
Hier geht es zu meiner Webseite: fob-scale.com
Meine Halterung passt auf den Moki 180 und Moki 250 für das
DUPLEX 2.4EX MRPM Drehzahlmessmodul.
Hier geht es zu meiner Webseite: fob-scale.com
Hier geht es zu meiner Webseite: fob-scale.com
https://www.hausundwerkstatt24.de/Loeten-mit-Propan-Sauerstoff
Komplettieren des Fahrwerkes und einige Einbau Tipps am Ende.
Hier geht es zu meiner Webseite: fob-scale.com
Part 2: Tail wheel electric retractable self built for warbirds. 1:4 and 1:5
Completing the landing gear and some installation tips at the end.
pressen der Blechteile und verlöten mit Silberlot.
Tailwheel electric retractable self-built for warbirds. 1:4 and 1:5
Pressing of the sheet metal parts and soldering with silver solder.
Hier geht es zu meiner Webseite: fob-scale.com
Hier geht es zu meiner Webseite: fob-scale.com
Resione
resione.com
Mein Drucker der Anycubic Photon Mono X ist dabei an seine Grenzen gestoßen. Als Resin habe ich das Resione M58 verwendet, jedes andere Resin hat hier versagt.
Hier geht es zu meiner Webseite: fob-scale.com
Hier geht es zu meiner Webseite: fob-scale.com
Hier geht es zu meiner Webseite: fob-scale.com
Der Anschlag in angepasster Form gibt es in meinem Shop
in der Variante für die Original Sägeblatt wie auch für ein 160mm Sägeblatt.
Günstige Innentür mit viel Glas.
Hier geht es zu meiner Webseite: fob-scale.com
Hier geht es zu meiner Webseite: fob-scale.com
Die DXF Dateien kann jeder über meine Mail kostenlos erhalten.
Making small gifts yourself from plywood scraps and scrap wood with CNC milling machine
Hier geht es zu meiner Webseite: fob-scale.com
bei der Noppenfolie ist wichtig, es darf nur eine Seite Alu bedampft sein !!!
Sichere Verpackung von Empfindlichen Teilen!
Hier geht es zu meiner Webseite: fob-scale.com
After the gluing of bubble wrap does not really last long, I show you the simple welding with a heat gun.
with the bubble wrap is important, it may be vaporized only one side aluminum !!!!
Secure packaging of sensitive parts!
"Midge" und "Big Squaw" ab 2'40" mit beiden Maschinen.
leider war die Sicht sehr schlecht, was sich auch auf die Aufnahmen auswirkt, aber wir kommen wieder!! Vielen Dank an Marijan Fajfar der uns das ermöglicht hat.
Hier geht es zu meiner Webseite: fob-scale.com
Season conclusion for the two Moki 400 in the P47 Razorback
2 Thunderbolt 1:4 with Moki400 in Smoke
Hier geht es zu meiner Webseite: fob-scale.com
Hier geht es zu meiner Webseite: fob-scale.com
With my 3D printer am encountered problems, he no longer found print files on the stick. How and what, there is in the clip.
Hier geht es zu meiner Webseite: fob-scale.com
In this clip, I try to show the coating of plywood with little cost. Glass coating or CFK, stable components for the model.
Diesmal mit Smoke ON, ist zwar nicht Scale auch macht Spaß.
Bei 37 Grad im Schatten, schnurrten die zwei MOKI 250 wie ein Uhrwerk.
Hier geht es zu meiner Webseite: fob-scale.com
It was once again time, my Junkers 188 was again in the air.
This time with Smoke ON, is not scale but fun.
At 37 degrees in the shade, the two MOKI 250 purred like clockwork.
Zu den Maschinen und Piloten.
Thunderbolt P47 Bausätze (by FOB) Massstab 1:4
Spannweite 310cm
Motoren Moki 400 bzw. Moki250 von Airworld
Rc Ausstattung Jeti RC von Hacker Modellbau
Propeller von Vario Prop (Christian Ramoser)
Piloten:
Markus Schwarzl "Midge"
Erwin Rainer "Whoooo"
Franz Obenauf "Big Squaw"
Zu unserem Erstflug Termin hatten wir 37 Grad im Schatten, es war echt hart, aber die Moki's haben wieder einmal gezeigt was sie können.
meine Webseite:https: //www.fob-scale.com
Noch noch einige Details über den Aufbau, am Ende des Clips gibt's dann noch eine kleine Vorschau auf ein Neues Projekt.
PKW Anhänger an der Decke verstauen!
Hier geht es zu meiner Webseite: fob-scale.com
Addendum to my first video about my self-built freight elevator with a winch goes 4 meters up. 400 Kg are no problem for him. As rails (lateral guides) I used 100mm U-profiles, I think this is a low cost variant to transport goods up or down.
Besten Dank an die Firma Hacker und Andreas Golla für die Unterstützung.
hacker-motor-shop.com/Flaechen-und-Rumpfverbinder.htm?SessionId=&a=catalog&p=9237
Hier geht es zu meiner Webseite: fob-scale.com
In this clip I would like to give a small overview of the possibilities of an electrical plug connection between wing and fuselage of a model airplane. From MPX connector to Wing Connector and Click Connect, also at the end a description how I crimp the contacts.
Die Bausätze sind aus eigener Produktion.
weitere Details gibt's aus meiner HP.
Hier geht es zu meiner Webseite: fob-scale.com
In the clip a small overview of what is happening with us, a status report on the construction of 3 Thunderbolt in 1:4 scale with a wingspan of 310cm and Moki radial engines. The machines are now about 2 years in construction and now it goes to the finish!
The kits are from own production.
more details are available from my HP.
Im Notfall sind Alle Komponenten wie, Motor, Tanks, Gasservo, Smokepumpe und Auspuff gut zugänglich.
Hier geht es zu meiner Webseite: fob-scale.com
Here I present a drivetrain for a Moki radial engine, the goal was: Everything compact to Verbauen and especially, easy to install and remove the engine and thus a service-friendly aggregate to have.
In an emergency, all components such as engine, tanks, throttle servo, smoke pump and exhaust are easily accessible.


