S124 V8 ENGINE IN for the FIRST TIME !!!! @JMSpeedshop
S124 V8 ENGINE IN for the FIRST TIME !!!!  @JMSpeedshop
Uploaded March 2021 | Updated November 2026, 3 days ago
➤Don't forget to subscribe ! bit.ly/SubscribeJMSpeedshop
➤Website: jmspeedshop.com
➤instagram: instagram.com/johanmuter

First time Drivetrain fitment in donor V8 turbo

So after the sale of the 190 V12. The donor car is cleaned as much as possible.  I had already removed the complete suspension front and rear. This was done @ the time the 190 V12 was not in the garage when it was painted. These parts where al been rebuild as you can see in earlier video

When there is just on trolley's it is not as easy to get it back on the lift.  So the suspension placement is pretty straight forward just the 4 bolts and plates.   These will be renewed when installed on in the final position.

The center driveshaft i'm using is from a W210 E420/E430 model and i need to mount the center bearing in when in final position. There is some play in length in the axle because the spline insert is 67mm and spline internal is 52mm. So maybe this is enough otherwise the axle need to be shortened or maybe made longer.

The engine is about 190.6kg incl steering tandempump, alternator, airconpump, airpump and starter.  without oil and coolant.  this is pretty lightweight.  the transmission seperate i did not way yet.

engine mounts will be steel 8mm plate to the engine and 4 mm plates for the framing.  Transmission mount will be a modified W210 trans mount. with the engine and trans in i can already see the steeringbox is  in the way of the exhaust port a lot.  So the engine needs to go forward 8cm or so or i have to do some JMSpeedshop magic on the setup to make it work

But i like to have the engine as far as possible backwards.  Because this will improve the weight distribution a lot.

Also have a look in the playlist of this project for the other video's or on my website 

if there are any questions just ask

Music: Jeff Kaale - Pillow Talk
S124 V8 ENGINE IN for the FIRST TIME !!!!Mercedes CLS55 AMG Design & Power POV Review & Tesdrive JMSpeedshop.com722.6 Transmission Swap Mercedes 190 2.5D W201Mercedes W126 gears repair Speedometer & Odometer by JMSpeedshop.com190 V12 top engine assembly Part 1 JMSpeedshop.comMercedes 190 V12 First Street Legal Drive !!! By JMSpeedshop !Mercedes w201 V12 Project-Build last chassis mod. wiring loom removed. JMSpeedshop !M113 VS M113K AMG Valve spring pressure Single VS DoubleS124 V8 diff new seals and coatingMercedes SL600 V12 Bi-Turbo 500HP!! 800NM!! Review & TestdriveThat Sound !!!! Mercedes C63 AMG P30 Performance pack500HP Porsche Cayenne Turbo 958  Review & Testdrive
JMSpeedshop ! |

S124 V8 ENGINE IN for the FIRST TIME !!!!

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER