Uploaded January 2013 | Updated November 2026, 3 days ago
fab-form.com/fastfoot/fastfootRisingDamp.php
Rising damp is the wicking of water through the footing, into the concrete wall, and its evaporation inside the building. Rising damp increases the moisture load which leads to dampness and mold.
Rising damp is prevented by isolating the concrete footing from ground moisture. While it is normal in the industry to protect the foundation wall from ground moisture with a damp proof membrane, no effort is made to protect the footing concrete. However most moisture is located at the bottom of the excavation, where the footings are located.
Rising damp does not produce pools of water (as with liquid water entering a concrete wall), but rather a chronic musty smell, growing insidiously stronger when the footing is exposed to more moisture.
The worst case of rising damp occurs when water ponding occurs at the footing level. This occurs over impervious soils where the excavation is inadequately sloped, the drain tiles are not located below the bottom of the footing, and no sub-footing drainage layer was installed.
Even without water ponding, rising damp occurs when unprotected footings are exposed to damp ground. 'Hygroscopic' concrete wicks ground moisture up into the foundation concrete which is then evaporated inside the building. Fastfoot® prevents this wicking from occurring, providing a drier and healthier indoor environment.
fab-form.com/fastfoot/fastfootRisingDamp.php
Rising damp is the wicking of water through the footing, into the concrete wall, and its evaporation inside the building. Rising damp increases the moisture load which leads to dampness and mold.
Rising damp is prevented by isolating the concrete footing from ground moisture. While it is normal in the industry to protect the foundation wall from ground moisture with a damp proof membrane, no effort is made to protect the footing concrete. However most moisture is located at the bottom of the excavation, where the footings are located.
Rising damp does not produce pools of water (as with liquid water entering a concrete wall), but rather a chronic musty smell, growing insidiously stronger when the footing is exposed to more moisture.
The worst case of rising damp occurs when water ponding occurs at the footing level. This occurs over impervious soils where the excavation is inadequately sloped, the drain tiles are not located below the bottom of the footing, and no sub-footing drainage layer was installed.
Even without water ponding, rising damp occurs when unprotected footings are exposed to damp ground. 'Hygroscopic' concrete wicks ground moisture up into the foundation concrete which is then evaporated inside the building. Fastfoot® prevents this wicking from occurring, providing a drier and healthier indoor environment.









