Uploaded April 2024 | Updated September 2026, 2 weeks ago
ABS, 275C base section, 255 below the hat, 500/30k/30SCV/.01PA/0.12 layer height/14 min/
Filament is dry.. does it fast, slow, medium.
Always a riddle with these things.
UPDATE:
Printed 3 of these with 0.0PA, 0.01 PA, 0.022 PA. 0.0 had the most scars, .022 had many also, .01 light scarring, but still scars on the hat.
Sliced again in Cura(using Super slicer most of the time), same settings, same time, same all.. no scarring on the hat, very light scarring on mouth and some very light scarring on the right eye. The rest is flawless.
ABS, 275C base section, 255 below the hat, 500/30k/30SCV/.01PA/0.12 layer height/14 min/
Filament is dry.. does it fast, slow, medium.
Always a riddle with these things.
UPDATE:
Printed 3 of these with 0.0PA, 0.01 PA, 0.022 PA. 0.0 had the most scars, .022 had many also, .01 light scarring, but still scars on the hat.
Sliced again in Cura(using Super slicer most of the time), same settings, same time, same all.. no scarring on the hat, very light scarring on mouth and some very light scarring on the right eye. The rest is flawless.
