Uploaded April 2022 | Updated September 2026, 7 hours ago

---

I got my Revopoint POP2 scanner. I'm pretty happy with it. I wanted to test the turn-table accuracy in both Marker Mode and Feature Mode. I used an easily obtainable precision step-block to run the tests. I got results in the 0.2-0.3mm Accuracy range. Revopoint is constantly improving their hardware, calibration, firmware, and software. I expect the scans will continue to get better.

Updated 4/19/2022: I also did a single view test that verified Revopoint 0.05mm single frame accuracy claim ( youtu.be/1Du2N5Uw_4I )

Here are the things I used for this project:

* Revopoint POP2 3D scanner ( amzn.to/3uiSDsO )
* Magnaflux Spotcheck ( amzn.to/33ayav7 )
* 0.25,0.5,0.75,1 inch Step Block ( amzn.to/38RIStx )
* 0.1,0.2,0.3,0.4,0.5 inch Step block ( amzn.to/3KPG5z6 )
* 0.1,0.2,0.4,0.6 inch Step block ( amzn.to/37TVf7G )
* Aesub 3D Scanning Spray ( shop.gomeasure3d.com/collections/aesub-3d-scanning-spray )
* Turntable Feature Scanning Ring ( thingiverse.com/thing:5270756 )'s
* Maxidon CAD/CAM Spray ( amzn.to/3uYNs1x )

FTC Disclaimer:
We may earn commissions for purchases made through the links below.
As Amazon Associates we earn from qualifying purchases.