Uploaded September 2026 | Updated November 2026, 3 days ago
2019 Chevy Express Low Power Condition
In this video, we diagnose a severe low-power condition caused by a restricted exhaust. We’ll use scan data, wide-open-throttle testing, exhaust backpressure testing, and an inspection camera to determine exactly what happened inside the catalytic converters.
But replacing the failed cats isn’t the end of this diagnosis. After the repair, the engine is still showing a rich condition with negative fuel trims. We’ll work through some of the possible causes, including fuel-contaminated oil, MAF sensor contamination, and injector flow issues. We’ll also perform an automated GDI injector balance test and discuss what those results are actually telling us.
Topics covered include restricted exhaust testing, catalytic converter failures, aftermarket vs. factory converters, O2 sensor data, exhaust leaks, fuel trim analysis, MAF testing, fuel-contaminated oil, and GDI injector balance testing.
This is a great example of why finding the failed part doesn’t always mean you’re finished with the diagnosis.
🔧 Looking for Deeper Training?
Whether you're a DIYer, an aspiring tech, or a working technician, ScannerDanner Premium gives you in-depth diagnostic training built around real testing and real troubleshooting:
👉 Join Here – 14 Days for $1
scannerdanner.com/join-scannerdanner-premium.html
On ScannerDanner Premium, you'll get:
*In-depth classroom lectures based on the material in my book
*Case studies with real vehicles brought into class
*Troubleshooting using proven diagnostic methods
*Access to our private forum
*Fundamental training in automotive electrical, electronics, and drivability diagnostics
📘 Want to Learn More About Diagnostics?
Check out my field manual, Engine Performance Diagnostics, available as both an eBook and paperback at:
👉 https://linktr.ee/scannerdanner
ScannerDanner Tools:
https://linktr.ee/scannerdanner
0:00 Chevy Express Restricted Exhaust Diagnosis
0:42 Test Drive – Severe Loss of Power
1:45 Analyzing Scan Data at Wide Open Throttle
3:07 Inspecting the Catalytic Converters
4:05 Fuel Trim Before the Repair
6:01 Aftermarket Catalytic Converter Problems
7:41 Checking for Exhaust Leaks
8:36 Catalytic Converter Backpressure Test
10:21 Major Exhaust Leak Found
11:23 What Needs Replaced?
14:33 Inspection Camera Reveals the Failure
17:16 Why Cheap Catalytic Converters Can Cost You
18:35 Don't Forget About Debris Downstream
19:41 New Catalytic Converter Assembly Installed
21:20 Fuel Trim Still Isn't Right
22:52 Diagnosing the Negative Fuel Trims
26:34 Post-Repair Test Drive
29:50 Oil Change, Air Filter & MAF Checks
31:47 Automated Injector Balance Test
33:18 Evaluating the Remaining Fuel Trim Issue
37:44 Injector Balance Test – Cold Engine
41:41 Comparing Injector Flow Bank-to-Bank
42:42 Injector Balance Test Results
48:58 Final Fuel Trim Numbers
49:24 Where We Go From Here
50:38 One Last Fuel Trim Check
51:28 Final Thoughts
⚠️ Disclaimer:
ScannerDanner LLC is not responsible for misuse, unauthorized changes, or incorrect application of any information provided. Always follow proper safety protocols when using tools, equipment, or procedures discussed in this video. Use this content at your own risk.
2019 Chevy Express Low Power Condition
In this video, we diagnose a severe low-power condition caused by a restricted exhaust. We’ll use scan data, wide-open-throttle testing, exhaust backpressure testing, and an inspection camera to determine exactly what happened inside the catalytic converters.
But replacing the failed cats isn’t the end of this diagnosis. After the repair, the engine is still showing a rich condition with negative fuel trims. We’ll work through some of the possible causes, including fuel-contaminated oil, MAF sensor contamination, and injector flow issues. We’ll also perform an automated GDI injector balance test and discuss what those results are actually telling us.
Topics covered include restricted exhaust testing, catalytic converter failures, aftermarket vs. factory converters, O2 sensor data, exhaust leaks, fuel trim analysis, MAF testing, fuel-contaminated oil, and GDI injector balance testing.
This is a great example of why finding the failed part doesn’t always mean you’re finished with the diagnosis.
🔧 Looking for Deeper Training?
Whether you're a DIYer, an aspiring tech, or a working technician, ScannerDanner Premium gives you in-depth diagnostic training built around real testing and real troubleshooting:
👉 Join Here – 14 Days for $1
scannerdanner.com/join-scannerdanner-premium.html
On ScannerDanner Premium, you'll get:
*In-depth classroom lectures based on the material in my book
*Case studies with real vehicles brought into class
*Troubleshooting using proven diagnostic methods
*Access to our private forum
*Fundamental training in automotive electrical, electronics, and drivability diagnostics
📘 Want to Learn More About Diagnostics?
Check out my field manual, Engine Performance Diagnostics, available as both an eBook and paperback at:
👉 https://linktr.ee/scannerdanner
ScannerDanner Tools:
https://linktr.ee/scannerdanner
0:00 Chevy Express Restricted Exhaust Diagnosis
0:42 Test Drive – Severe Loss of Power
1:45 Analyzing Scan Data at Wide Open Throttle
3:07 Inspecting the Catalytic Converters
4:05 Fuel Trim Before the Repair
6:01 Aftermarket Catalytic Converter Problems
7:41 Checking for Exhaust Leaks
8:36 Catalytic Converter Backpressure Test
10:21 Major Exhaust Leak Found
11:23 What Needs Replaced?
14:33 Inspection Camera Reveals the Failure
17:16 Why Cheap Catalytic Converters Can Cost You
18:35 Don't Forget About Debris Downstream
19:41 New Catalytic Converter Assembly Installed
21:20 Fuel Trim Still Isn't Right
22:52 Diagnosing the Negative Fuel Trims
26:34 Post-Repair Test Drive
29:50 Oil Change, Air Filter & MAF Checks
31:47 Automated Injector Balance Test
33:18 Evaluating the Remaining Fuel Trim Issue
37:44 Injector Balance Test – Cold Engine
41:41 Comparing Injector Flow Bank-to-Bank
42:42 Injector Balance Test Results
48:58 Final Fuel Trim Numbers
49:24 Where We Go From Here
50:38 One Last Fuel Trim Check
51:28 Final Thoughts
⚠️ Disclaimer:
ScannerDanner LLC is not responsible for misuse, unauthorized changes, or incorrect application of any information provided. Always follow proper safety protocols when using tools, equipment, or procedures discussed in this video. Use this content at your own risk.





![85 Celica 22RE - Intermittent Low Power Condition [Part 2]
Toyota 22RE Engine - fuel pump diagnostics - low pressure and bleed down problems are addressed in this video
00:00 - review of part 1
1:10 - removing the fuel tank with my son
8:26 - what ruined the old fuel pump
10:40 - cleaning the fuel tank
13:55 - what the tank looks like after cleaning
14:26 - installing the new fuel pump/reinstalling fuel tank
16:30 - tips on purging the fuel lines
18:12 - am I thinner or is it the shirt? lol
21:14 - fuel pressure measurements (new pump)
22:53 - using the VAF to energize the fuel pump
23:13 - fuel pressure bleed down issue
24:00 - engine running fuel psi tests
24:42 - engine noise testing
25:20 - fuel pump current (new pump)
https://www.aeswave.com/scannerdanner-c512/
28:20 - fuel psi bleed-down testing
📘 Want to Learn More About Diagnostics?
Check out my field manual, Engine Performance Diagnostics, available as both an eBook and paperback at:
👉 https://linktr.ee/scannerdanner
🔧 Looking for Deeper Training?
Whether youre a DIYer, an aspiring tech, or a professional looking to sharpen your skills, join ScannerDanner Premium for next-level diagnostics training:
👉 Join Here – 14 Days for $1
https://www.scannerdanner.com/join-scannerdanner-premium.html
On ScannerDanner Premium, youll get:
*In-depth classroom lectures straight from my book
*Exclusive case studies with live vehicles pulled into class
*Real-time troubleshooting using proven methods
*Post help requests on our forum
*Fundamental training on diagnosing automotive electrical and electronics systems.
ScannerDanner Tools:
https://linktr.ee/scannerdanner
⚠️ Disclaimer:
ScannerDanner LLC is not responsible for misuse, unauthorized changes, or incorrect application of any information provided. Always follow proper safety protocols when using tools, equipment, or procedures discussed in this video. Use this content at your own risk. 85 Celica 22RE - Intermittent Low Power Condition [Part 2]](https://i.ytimg.com/vi/omqPoEgfiQc/mqdefault.jpg)




