Uploaded May 2018 | Updated November 2026, 3 hours ago
This video from Sears PartsDirect shows how to replace a surface element control switch on an electric range. The surface element control switch—also called a surface burner switch or infinite switch—turns the associated surface element on and off, and controls the heat level for the element. If you can’t turn the element on or off, or if you can’t change how hot the element is, replace the control switch with a manufacturer-approved part.
Visit us at:
https://www.searspartsdirect.com?sid=soc:youtube:replacing-a-range-surface-element-control-switch
Or call 1-800-437-1673 to speak with a parts specialist.
The video includes these parts and tools. Look up your model to make sure you get the right parts for your range.
Surface element control switch
searspartsdirect.com/part-number/316436000/0022/628.html?sid=soc:youtube:card-direct-part-link
Find parts for your Range at:
searspartsdirect.com/partsdirect/product-types/Range-Parts?sid=soc:youtube:rangeparts
Or, click here to schedule an appointment with a repair technician.
searshomeservices.com/repair#showall
Transcript:
The first step to replacing the surface element control switch is to pull out the range and unplug the power cord. Remove the screws from the control panel back shield and pull the shield off the range. Pull off the control knob. Remove the screws that attach the surface element control switch to the control panel. Pull out the switch and transfer the wires from the existing switch to the new switch. Insert the new switch in the control panel and secure it with the mounting screws. Push the control knob onto the stem. Place the control panel back shield on the back of the control console and fasten it with the mounting screws. Plug the power cord into the outlet. Carefully slide the range into position, ensuring that the rear leveling foot fully connects with the anti-tip bracket.
This video from Sears PartsDirect shows how to replace a surface element control switch on an electric range. The surface element control switch—also called a surface burner switch or infinite switch—turns the associated surface element on and off, and controls the heat level for the element. If you can’t turn the element on or off, or if you can’t change how hot the element is, replace the control switch with a manufacturer-approved part.
Visit us at:
https://www.searspartsdirect.com?sid=soc:youtube:replacing-a-range-surface-element-control-switch
Or call 1-800-437-1673 to speak with a parts specialist.
The video includes these parts and tools. Look up your model to make sure you get the right parts for your range.
Surface element control switch
searspartsdirect.com/part-number/316436000/0022/628.html?sid=soc:youtube:card-direct-part-link
Find parts for your Range at:
searspartsdirect.com/partsdirect/product-types/Range-Parts?sid=soc:youtube:rangeparts
Or, click here to schedule an appointment with a repair technician.
searshomeservices.com/repair#showall
Transcript:
The first step to replacing the surface element control switch is to pull out the range and unplug the power cord. Remove the screws from the control panel back shield and pull the shield off the range. Pull off the control knob. Remove the screws that attach the surface element control switch to the control panel. Pull out the switch and transfer the wires from the existing switch to the new switch. Insert the new switch in the control panel and secure it with the mounting screws. Push the control knob onto the stem. Place the control panel back shield on the back of the control console and fasten it with the mounting screws. Plug the power cord into the outlet. Carefully slide the range into position, ensuring that the rear leveling foot fully connects with the anti-tip bracket.










