atkelar | Repair #4 - Tractor Engine Tune Up @atkelar | Uploaded October 2021 | Updated October 2024, 14 hours ago.
(updated the number in the video title and thumbnail, this is repair #4, not #2 as the video intro shows, sorry ๐)
You might remember my summer of 2020 project: the oil change in my tractor that got slightly out of hand? Well, I tried to finish up the job, as the annual inspection is closing in on me again. But much to my dismay, when I wanted to address the valve issue, I found out that I had a more pressing issue with the head gasket!
Again, what started as a rather "simple" repair ended up in a series of rabbit holes. Sheesh!
0:00 Intro / Flashback and Scope Description
1:56 Disassembly and Hydraulic Cylinders
3:54 Open Engine Bay / Exhaust / Air Intake
4:35 Rockers / Push Rods / Head Bolts
5:25 Head Removal / Head Gasket Problem
6:36 Valves / Valve Seat Cutters
7:45 Cutting Valves, Lapping and Head Mounting
9:12 Ball Joints
11:00 Torquing Headbolts / Temporary Mounting of Rockers
12:00 Warm Up / Coolant Issue #2 / New Gasket!
13:08 Injector Removal / Flattening Head
13:54 New Gaske and Revelation / Injector Issue / Adjusting Injectors
15:40 Mounting Head, #2 / Trial Run
16:52 Final Result / Test Drive / Summary / Credits / Outtakes
Donate a few bucks for some coffee (or some equipment upgrades): ko-fi.com/atkelar
Music:
My Train's A Comin'
Unicorn Heads
(YouTube Audio Library)
(updated the number in the video title and thumbnail, this is repair #4, not #2 as the video intro shows, sorry ๐)
You might remember my summer of 2020 project: the oil change in my tractor that got slightly out of hand? Well, I tried to finish up the job, as the annual inspection is closing in on me again. But much to my dismay, when I wanted to address the valve issue, I found out that I had a more pressing issue with the head gasket!
Again, what started as a rather "simple" repair ended up in a series of rabbit holes. Sheesh!
0:00 Intro / Flashback and Scope Description
1:56 Disassembly and Hydraulic Cylinders
3:54 Open Engine Bay / Exhaust / Air Intake
4:35 Rockers / Push Rods / Head Bolts
5:25 Head Removal / Head Gasket Problem
6:36 Valves / Valve Seat Cutters
7:45 Cutting Valves, Lapping and Head Mounting
9:12 Ball Joints
11:00 Torquing Headbolts / Temporary Mounting of Rockers
12:00 Warm Up / Coolant Issue #2 / New Gasket!
13:08 Injector Removal / Flattening Head
13:54 New Gaske and Revelation / Injector Issue / Adjusting Injectors
15:40 Mounting Head, #2 / Trial Run
16:52 Final Result / Test Drive / Summary / Credits / Outtakes
Donate a few bucks for some coffee (or some equipment upgrades): ko-fi.com/atkelar
Music:
My Train's A Comin'
Unicorn Heads
(YouTube Audio Library)