Recovering Bit Rotted EPROMs @CassetteMaster
Recovering Bit Rotted EPROMs  @CassetteMaster
Uploaded October 2018 | Updated November 2026, 1 day ago
Bit rot is one of those things that can affect EPROMs with age, as their charge slow slips away. Same applies to long exposure to incident light, such as the sun or fluorescent lamps.

This video shows that if you lower the VCC voltage, you can recover data off the chip. Since the stored bit is really a charge, which can vary in intensity, the EPROM uses a comparator to detect whether it is considered a '1' or a '0'. If you lower the VCC voltage (say to 3V), that comparator detection point is lowered as well, and a partially-erased bit can be recovered.

This video shows a successful recovery of data from a bit-rotted chip, which was partially erased by incident light over time.

Useful for restoring old computers, arcades, and other old devices that contain EPROMs.
Recovering Bit Rotted EPROMsAllied TR-1055 5-inch reel to reel tape recorderAmmonite Talk - For The 8-Track ChapISD ChipCorder built into an intercom boxPopping Capacitors With SpeakerFreak95Sony TC-905A Reel-to-Reel Portable   SHORT SERIESAnthony on the Victor HandcorderTHE UNBOX REVISITEDDan Beard and the Peirce Wire RecorderTRKE - What Can You Say Now? (2019)51: The Light Switch38: Resistors and Capacitors Together 1
CassetteMaster |

Recovering Bit Rotted EPROMs

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER