ISD ChipCorder built into an intercom box @CassetteMaster
ISD ChipCorder built into an intercom box  @CassetteMaster
Uploaded December 2019 | Updated November 2026, 1 day ago
ISD1000AP, a 20-second (when using default 8kHz sample rate) sound recording chip, is used in a circuit built into an old (1999 vintage) Vodavi Communications Systems Starplus Phone Box intercom housing. It makes the perfect housing for a project like this, having a place for a small speaker, and a condenser mic, and two pushbuttons. I used the original buttons and LEDs, but built on modern perfboard.


There are other similar sound chips, the ISD1020, which is the same as mine, and the popular 10-second ISD1820, in a small 14-pin dual in-line package. My ISD1000AP is a vintage chip, dating from 1993 according to its date code.


These chips are fun to use, and simple. They are technically analog, as they use EEPROM memory cells (non-volitile), but instead of storing digital ones and zeros in the memory cells, they store an analog value. Technically, EPROM and EEPROM chips can store analog values normally, but are used for digital values with a threshold where the stored charge is a zero, and the absence of a charge is a one. But since that charge can vary, you can have an analog value. The ISD chips take advantage of this, therefore simplifying the IC and having more memory density, as they don't have to use 8 bits for one sample, just one bit. One analog "bit".
ISD ChipCorder built into an intercom boxPopping Capacitors With SpeakerFreak95Sony TC-905A Reel-to-Reel Portable   SHORT SERIESAnthony on the Victor HandcorderTHE UNBOX REVISITEDDan Beard and the Peirce Wire RecorderTRKE - What Can You Say Now? (2019)51: The Light Switch38: Resistors and Capacitors Together 1Panasonic RQ-195 Jumbo Microcassette Recorder53, 54, 55: Capital Letter, Small Letter, and Number Displaysanother test
CassetteMaster |

ISD ChipCorder built into an intercom box

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER