Uploaded July 2019 | Updated November 2026, 1 day ago
Welcome Back,
Well i have finally pushed this little DML250 to its limits, whilst starting to turn a rather large piece of sycamore, I heard and felt a change in the way the lathe was behaving!!!!
Upon inspection I found out that the drive belt had worn and split, causing slipping and reduced tension, resulting in a poor cut.
So, as opposed to a turning video. I give you a “Record Power DML250 Drive Belt Replacement” video
(Side note - I will be finishing the “turn” but in a couple of weeks - Stay Tuned)
I have recently joined Pateron - so if you would like to help fund future videos then please pop on over to my Patreon Page and support me - with as little or as much as you would like to - no pressure.
patreon.com/user?alert=2
As always, I will share my trials and tribulations documenting my journey. As I believe that it is important to grow and learn from your mistakes.
If you would like to Support my work, then please consider leaving me a “tip” in my paypal account - all donations will go towards future projects
paypal.me/mgmakes
If I have inspired you to “learn to turn” then, please check out the affiliate links below to the tools that I use.
Record Power DML 250
amzn.to/2C2x3fL
Record Power 4 Piece HSS Woodturning Chisels set
amzn.to/2R8IOf8
Record Power 4 Jaw Chuck
amzn.to/2C4NxUC
Liberon Sanding Sealer 500ML
amzn.to/2GWJWhk
Hampshire Sheen Microcystalline wax
amzn.to/2W0QXRP
Thanks for watching and stay safe.
Yes I know i will not be doing some things correctly, I will be making mistakes, but i will will try to work safe and learn from my mistakes and improve on my techniques as we go along.
I hope you enjoy the video.
Please Follow me on,
Instagram
instagram.com/mgmakes
Facebook
facebook.com/mg.makes.73
A Proud Member of
Small Workshop YouTube Makers Facebook Group
facebook.com/groups/SmallWorkshopYouTubeMakers
Makers Media Network
facebook.com/groups/MakersMediaNetwork
Welcome Back,
Well i have finally pushed this little DML250 to its limits, whilst starting to turn a rather large piece of sycamore, I heard and felt a change in the way the lathe was behaving!!!!
Upon inspection I found out that the drive belt had worn and split, causing slipping and reduced tension, resulting in a poor cut.
So, as opposed to a turning video. I give you a “Record Power DML250 Drive Belt Replacement” video
(Side note - I will be finishing the “turn” but in a couple of weeks - Stay Tuned)
I have recently joined Pateron - so if you would like to help fund future videos then please pop on over to my Patreon Page and support me - with as little or as much as you would like to - no pressure.
patreon.com/user?alert=2
As always, I will share my trials and tribulations documenting my journey. As I believe that it is important to grow and learn from your mistakes.
If you would like to Support my work, then please consider leaving me a “tip” in my paypal account - all donations will go towards future projects
paypal.me/mgmakes
If I have inspired you to “learn to turn” then, please check out the affiliate links below to the tools that I use.
Record Power DML 250
amzn.to/2C2x3fL
Record Power 4 Piece HSS Woodturning Chisels set
amzn.to/2R8IOf8
Record Power 4 Jaw Chuck
amzn.to/2C4NxUC
Liberon Sanding Sealer 500ML
amzn.to/2GWJWhk
Hampshire Sheen Microcystalline wax
amzn.to/2W0QXRP
Thanks for watching and stay safe.
Yes I know i will not be doing some things correctly, I will be making mistakes, but i will will try to work safe and learn from my mistakes and improve on my techniques as we go along.
I hope you enjoy the video.
Please Follow me on,
instagram.com/mgmakes
facebook.com/mg.makes.73
A Proud Member of
Small Workshop YouTube Makers Facebook Group
facebook.com/groups/SmallWorkshopYouTubeMakers
Makers Media Network
facebook.com/groups/MakersMediaNetwork










