RC Digital FPV Adding Live Audio (~750mhz) @Magneticitist
RC Digital FPV Adding Live Audio (~750mhz)  @Magneticitist
Uploaded May 2023 | Updated November 2026, 3 hours ago
I think audio can be useful for both drone and car FPV users because it gives you another form of feedback regarding what your motors are doing at any given time. When I'm driving without audio it's hard for me to really tell how much throttle I'm giving. I also need to be able to hear people/dogs around me.

I'm using this alongside Goggles V2 and O3 Air Unit and at about 4v input the transmitter was pulling about 175mA. With this particular unit the receiver won't light the red indicator until the transmitter is powered and talking to it. There are probably similar small transmitters and receivers which use other viable frequencies. It will be interesting to see if this transmitter interferes at all with my control range. I can slightly hear the background noise increase when using the 2.4g booster as well. Since I'm unsure of the actual transmitter frequency it will be hard for me to notch that out. If someone is already using a control in the 900mhz region then they can probably find good-range audio transmitters running at 2.4g instead. Since such a setup doesn't require a lot of power it can be made really small with even smaller antennas, but I don't really care since I'm using a car. If it ends up affecting any of my other systems I'm going to ditch it but so far it seems a better alternative than trying to use just the audio channel on a larger 1.3g AV transmitter. If I want to hear audio at any given time it's just a matter of bringing my little battery powered speaker box receiver with me, which I'll later probably just use headphones on and make it something that can attach to the goggles.

If using a relay make sure to add some kind of flyback diode across the coil, but if this works out well I'm going to ditch the relay and just use a mosfet. You could try powering the transmitter from a 5v BEC directly coming off the control receiver but I don't recommend it. If the specs of this thing are accurate it should easily match the range of my video and control. If someone wants to have the live audio added to their videos I guess one bootleg solution would be to just record the audio feed and mix it into the video later, instead of using the onboard audio and video of a gopro or something.

I've also replaced the stock O3 antennas with TrueRC Matchstick Carbon antennas with the 115mm extension leads. These are both LHCP along with the patch on the goggles. The stock antenna is dual band but it only needs 2.4g when using the DJI controller so these two LHCP 5.8g antenna replacements should work fine I hope. They sit just a bit higher and I hope they work just a bit better. With these I can do a range test at the same spot as my first one and see if all these new antennas made any damn difference at all.


aliexpress.us/item/3256803862786755.html?pdp_npi=2%40dis%21USD%21%2423.32%21%2421.45%21%21%21%21%21%402101f04d16852518745458429e07bd%2112000027858399919%21btf&_t=pvid%3A79512ad0-ae22-42bb-962f-4e0347eece65&afTraceInfo=1005004049101507__pc__pcBridgePPC__xxxxxx__1685251874&spm=a2g0o.ppclist.product.mainProduct&gatewayAdapt=glo2usa
RC Digital FPV Adding Live Audio (~750mhz)Typhon 3s FPV Sensored Street RunsRC FPV O3 Air Unit w/RockSteady StabilizationRC FPV Builds ARRMA Typhon/Fireteam (DJI O3 + O4 Pro)ARRMA Big Rock FPV DJI O3 Better Rain TestFPV Big Rock DJI O3 + Crossfire + 1.3g Audio SetupQCWSSTC 1 Meter Swords 130VDC RampsLighter vs 100W HFSSTC Plasma FlameTyphon 3s FPV Lumenier O3 Antenna Test 2ARRMA Typhon and Mr. Hanky Lot Roaming (DJI O3+Crossfire)RC FPV.. Testing 600mW transmitter w/ 2-Axis CamMore Low Voltage Self Oscillating Push-Pull SSTC Details
Magneticitist |

RC Digital FPV Adding Live Audio (~750mhz)

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER