Uploaded January 2024 | Updated November 2026, 5 hours ago
I haven't posted a simulation in a while. It's #SimulationFriday again, so here we go again! After many updates and an overhaul to my OpenCL graphics engine, this is the raindrop splash simulated and raytraced on the Arc A750 at 109 million cells (504x504x428). Took 16 minutes for 8252 time steps (3ms real time).
Find the FluidX3D CFD software on GitHub: github.com/ProjectPhysX/FluidX3D
This particular setup is here: github.com/ProjectPhysX/FluidX3D/blob/master/src/setup.cpp#L1071
Timestamps
0:00 Camera 1
0:05 Camera 2
0:10 Camera 3
0:15 Camera 4
#FluidX3D #CFD #IntelArc #Raytracing #FluidSimulation
I haven't posted a simulation in a while. It's #SimulationFriday again, so here we go again! After many updates and an overhaul to my OpenCL graphics engine, this is the raindrop splash simulated and raytraced on the Arc A750 at 109 million cells (504x504x428). Took 16 minutes for 8252 time steps (3ms real time).
Find the FluidX3D CFD software on GitHub: github.com/ProjectPhysX/FluidX3D
This particular setup is here: github.com/ProjectPhysX/FluidX3D/blob/master/src/setup.cpp#L1071
Timestamps
0:00 Camera 1
0:05 Camera 2
0:10 Camera 3
0:15 Camera 4
#FluidX3D #CFD #IntelArc #Raytracing #FluidSimulation

![PhysX3D [GRAVITY SIMULATION] 25k body galaxy @20x playback speed
This is PhysX3D simulating a galaxy containing 25000 stars. For calculation brute force and RK4 integration is being used on a notebook GPU (Nvidia GTX 960M, 1.54TFlops). The GPU calculates roughly 3.5 Billion particle interactions every second.
This simulation took 12 minutes to calculate.
More information at: http://www.projectphysx.de
Music: Puddle of Infinity - Open Sea Morning PhysX3D [GRAVITY SIMULATION] 25k body galaxy @20x playback speed](https://i.ytimg.com/vi/TmBf2DI-3cE/mqdefault.jpg)



![PhysX3D [GRAVITY SIMULATION] Der zweite Mond der Erde – 2016 HO3
Die Erde hat einen zweiten Mond, 2016 HO3 wird er bezeichnet. Er ist sehr weit außen, 70 Mal so weit wie der Erdmond. Er ist auch sehr klein, nur ca. 70 Meter im Durchmesser, und deshalb nicht einmal mit einem Amateurteleskop sichtbar. Aber es gibt ihn, das hat die NASA bestätigt, und er umkreist die Erde, was ihn zu einem Mond macht. Aufgrund der großen Distanz zur Erde ist seine Umlaufbahn jedoch nicht stabil, sodass er diese in etwa 325 Jahren verlassen wird und zum Erdtrabanten in einer Hufeisenumlaufbahn wird. Klingt komisch, ist es auch. Ich hab’s genauer unter die Lupe genommen und seine Bahn für die nächsten 1300 Jahre vorausberechnet.
Mehr Informationen auf: http://www.projectphysx.de
Songs:
M83 – Outro
M83 – Fearful Odds
M83 – Oblivion PhysX3D [GRAVITY SIMULATION] Der zweite Mond der Erde – 2016 HO3](https://i.ytimg.com/vi/V7mHQ0L4Wkc/mqdefault.jpg)

![FluidX3D [FLUID SIMULATION] Real Time Prototype Demo
Simulating a liquid is usually reserved for supercomputers. However, in the last few years, the amount of calculating power provided by consumer graphics cards skyrocketed to the point where well optimized code today can result in a successful real time simulation. As a rule of thumb, one GPU is about as fast as 100 multi-core CPUs for well parallelizable code.
This is an optimized OpenCL implementation of the barebones Lattice Boltzmann Method (LBM) in its simplest 3D form with the D3Q15 velocity set, optimized to run parallelized on the GPU.
All the shown demos run in real time on an old laptop GPU (GTX 960M with 640 CUDA cores @1200MHz).
The blue curves represent integrated streamlines through the velocity field, which itself is updated by the GPU approximately 50 times per second.
The maximum lattice size is limited by the amount of VRAM to 256x256x256, at which the program fills 2.6GB of graphics memory.
For more information about FluidX3D and my other projects, visit
http://www.projectphysx.de
Music: Death & Rebirth - Lotus Eater FluidX3D [FLUID SIMULATION] Real Time Prototype Demo](https://i.ytimg.com/vi/Vv-ZoJudJq0/mqdefault.jpg)


![PhysX3D [GRAVITY SIMULATION] Galaxy fly-through + Blooming Effekt demo
Recently I have improved the blooming effect in terms of performance by about two magnutudes.
Blooming is a rendering effect which makes the otherwise black space between close pixels brighter. It is a post-processing effect, meaning the completely rendered frame is being edited as an image right before being drawn on the screen.
The improvement that I implemented was instead of going through the frame pixel by pixel and checking the surrounding of each pixel, at first to scan the frame for all non-black pixels and to save their positions, so the algorithm only has to iterate through the amount of drawn pixels instead of the whole frame.
More information at: http://www.projectphysx.de
Music: Puddle of Infinity - Open Sea Morning PhysX3D [GRAVITY SIMULATION] Galaxy fly-through + Blooming Effekt demo](https://i.ytimg.com/vi/WbbjvGIfqdc/mqdefault.jpg)