Raspberry Pi Pico/MicroPython + ESP-C3-12F (as a WiFi co-processor using AT Command) @AndroidEric
Raspberry Pi Pico/MicroPython + ESP-C3-12F (as a WiFi co-processor using AT Command)  @AndroidEric
Uploaded November 2021 | Updated November 2026, 1 day ago
Exercise on Raspberry Pi Pico/MicroPython work with ESP-C3-12F Module with AT Command Firmware, act as a WiFi co-processor. The Raspberry Pi Pico control ESP-C3-12F using AT Command, to connect and send data to TCP and UDP Server running on Raspberry Pi/Python.
code available: embedded-things.blogspot.com/2021/11/rpi-picomicropython-esp-c3-12f-as-wifi.html
Raspberry Pi Pico/MicroPython + ESP-C3-12F (as a WiFi co-processor using AT Command)UDP communication between Raspberry Pi/Python and Arduino Nano RP2040 ConnectRaspberry Pi Pico/CircuitPython read L3GD20(Gyroscope)BLE Communication: Nano RP2040 Connect (Peripheral) and ESP32 (Central), in Arduino framework.STM32F411/CircuitPython 7, with SPI ST7735 LCDFirst Power up Raspberry Pi Pico, on Raspberry Pi.Install CircuitPython 7.2.0 on ESP32-C3 (ESP32-C3-DevKitM-1)XIAO BLE Sense (Arduino framework) IMU USB Mousearduino-esp32, drive SSD1306 I2C OLED with ESP32/S2/C3 using esp8266-oled-ssd1306 libraryESP32 + 2.4 320X240 Display (SPI ILI9341), using TFT_eSPI, prepare user setup file.Drive ESP32-C3-DevKitM-1/ESP32-S2-Saola-1 on-board RGB LED (WS2812) in Arduino FrameworkSimple Bluetooth communication between Raspberry Pi/Python and ESP32/SerialToSerialBT
an Erik |

Raspberry Pi Pico/MicroPython + ESP-C3-12F (as a WiFi co-processor using AT Command)

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER